aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32/f1/other/rtc/rtc.c
blob: 41c5d89ff152bfd4b92868541388e67c158b0c01 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
/*
 * This file is part of the libopencm3 project.
 *
 * Copyright (C) 2010 Lord James <lordjames@y7mail.com>
 *
 * This library is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this library.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/f1/rtc.h>
#include <libopencm3/stm32/usart.h>
#include <libopencm3/stm32/pwr.h>
#include <libopencm3/cm3/nvic.h>

void clock_setup(void)
{
	rcc_clock_setup_in_hse_8mhz_out_72mhz();

	/* Enable GPIOC clock. */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);

	/* Enable clocks for GPIO port A (for GPIO_USART1_TX) and USART1. */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_USART1EN);
}

void usart_setup(void)
{
	/* Setup GPIO pin GPIO_USART1_TX/GPIO9 on GPIO port A for transmit. */
	gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
		      GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART1_TX);

	/* Setup UART parameters. */
	usart_set_baudrate(USART1, 38400);
	usart_set_databits(USART1, 8);
	usart_set_stopbits(USART1, USART_STOPBITS_1);
	usart_set_mode(USART1, USART_MODE_TX);
	usart_set_parity(USART1, USART_PARITY_NONE);
	usart_set_flow_control(USART1, USART_FLOWCONTROL_NONE);

	/* Finally enable the USART. */
	usart_enable(USART1);
}

void gpio_setup(void)
{
	/* Set GPIO12 (in GPIO port C) to 'output push-pull'. */
	gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_2_MHZ,
		      GPIO_CNF_OUTPUT_PUSHPULL, GPIO12);
}

void nvic_setup(void)
{
	/* Without this the RTC interrupt routine will never be called. */
	nvic_enable_irq(NVIC_RTC_IRQ);
	nvic_set_priority(NVIC_RTC_IRQ, 1);
}

void rtc_isr(void)
{
	volatile u32 j = 0, c = 0;

	/* The interrupt flag isn't cleared by hardware, we have to do it. */
	rtc_clear_flag(RTC_SEC);

	/* Visual output. */
	gpio_toggle(GPIOC, GPIO12);

	c = rtc_get_counter_val();

	/* Display the current counter value in binary via USART1. */
	for (j = 0; j < 32; j++) {
		if ((c & (0x80000000 >> j)) != 0) {
			usart_send(USART1, '1');
		} else {
			usart_send(USART1, '0');
		}
	}
	usart_send(USART1, '\n');
}

int main(void)
{
	clock_setup();
	gpio_setup();
	usart_setup();

	/*
	 * If the RTC is pre-configured just allow access, don't reconfigure.
	 * Otherwise enable it with the LSE as clock source and 0x7fff as
	 * prescale value.
	 */
	rtc_auto_awake(LSE, 0x7fff);

	/* Setup the RTC interrupt. */
	nvic_setup();

	/* Enable the RTC interrupt to occur off the SEC flag. */
	rtc_interrupt_enable(RTC_SEC);

	while (1);

	return 0;
}