------------------------------------------------------------------------------ README ------------------------------------------------------------------------------ This is a small example program using libopenstm32. It's intended for the ST STM32-based Olimex STM32-H103 eval board (see http://olimex.com/dev/stm32-h103.html for details). It should blink the LED on the board. Building -------- $ make Running 'make' on the top-level libopenstm32 directory will automatically also build this example. Or you can build the library "manually" and then run 'make' in this directory. You may want to override the toolchain (e.g., arm-elf or arm-none-eabi): $ PREFIX=arm-none-eabi make For a more verbose build you can use $ make V=1 Flashing -------- You can flash the generated code on the STM32-H103 board using OpenOCD: $ make flash Or you can do the same manually via: $ openocd -f interface/jtagkey-tiny.cfg -f board/olimex_stm32_h103.cfg $ telnet localhost 4444 > init > reset halt > flash write_image erase blink.bin 0x08000000 > resume 0x08000000 Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using.