From 580d25a84baaa160b0afdc096e9aa1e8ca1c2d2b Mon Sep 17 00:00:00 2001 From: Stephen Caudle Date: Mon, 31 Oct 2011 00:16:37 -0400 Subject: Move STM32 example projects in family specific folders --- examples/stm32f1/obldc/usart/usart.c | 90 ------------------------------------ 1 file changed, 90 deletions(-) delete mode 100644 examples/stm32f1/obldc/usart/usart.c (limited to 'examples/stm32f1/obldc/usart/usart.c') diff --git a/examples/stm32f1/obldc/usart/usart.c b/examples/stm32f1/obldc/usart/usart.c deleted file mode 100644 index b2efe71..0000000 --- a/examples/stm32f1/obldc/usart/usart.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * This file is part of the libopencm3 project. - * - * Copyright (C) 2009 Uwe Hermann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include - -void clock_setup(void) -{ - rcc_clock_setup_in_hse_8mhz_out_72mhz(); - - /* Enable GPIOA clock (for LED GPIOs). */ - rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN); - - /* Enable clocks for GPIO port B (for GPIO_USART1_TX) and USART1. */ - rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN); - rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN); - rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_USART1EN); -} - -void usart_setup(void) -{ - /* Setup GPIO6 (in GPIO port A) to 'output push-pull' for LED use. */ - gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ, - GPIO_CNF_OUTPUT_PUSHPULL, GPIO6); - - AFIO_MAPR |= AFIO_MAPR_USART1_REMAP; - - /* Setup GPIO pin GPIO_USART3_TX/GPIO10 on GPIO port B for transmit. */ - gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ, - GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART1_RE_TX); - - /* Setup UART parameters. */ - usart_set_baudrate(USART1, 230400, rcc_ppre2_frequency); - usart_set_databits(USART1, 8); - usart_set_stopbits(USART1, USART_STOPBITS_1); - usart_set_mode(USART1, USART_MODE_TX); - usart_set_parity(USART1, USART_PARITY_NONE); - usart_set_flow_control(USART1, USART_FLOWCONTROL_NONE); - - /* Finally enable the USART. */ - usart_enable(USART1); -} - -void gpio_setup(void) -{ - /* Set GPIO12 (in GPIO port C) to 'output push-pull'. */ - gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ, - GPIO_CNF_OUTPUT_PUSHPULL, GPIO6); -} - -int main(void) -{ - int i, j = 0, c = 0; - - clock_setup(); - gpio_setup(); - usart_setup(); - - /* Blink the LED (PC12) on the board with every transmitted byte. */ - while (1) { - gpio_toggle(GPIOA, GPIO6); /* LED on/off */ - usart_send_blocking(USART1, c + '0'); /* Send a byte. */ - c = (c == 9) ? 0 : c + 1; /* Increment c. */ - if ((j++ % 80) == 0) { /* Newline after line full. */ - usart_send_blocking(USART1, '\r'); - usart_send_blocking(USART1, '\n'); - } - for (i = 0; i < 800000; i++) /* Wait a bit. */ - __asm__("nop"); - } - - return 0; -} -- cgit v1.2.3