From 01bfbfed411f9e96218070e2b36438b783df29ba Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Wed, 29 Dec 2010 19:49:59 +0100 Subject: Deduplicate example README file contents. --- examples/stm32-h103/spi/README | 38 -------------------------------------- 1 file changed, 38 deletions(-) (limited to 'examples/stm32-h103/spi') diff --git a/examples/stm32-h103/spi/README b/examples/stm32-h103/spi/README index 8b46e7c..d4714c2 100644 --- a/examples/stm32-h103/spi/README +++ b/examples/stm32-h103/spi/README @@ -6,41 +6,3 @@ This example program repeatedly sends characters on SPI1 on the ST STM32-based Olimex STM32-H103 eval board (see http://olimex.com/dev/stm32-h103.html for details). - -Building --------- - - $ make - -Running 'make' on the top-level libopenstm32 directory will automatically -also build this example. Or you can build the library "manually" and -then run 'make' in this directory. - -You may want to override the toolchain (e.g., arm-elf or arm-none-eabi): - - $ PREFIX=arm-none-eabi make - -For a more verbose build you can use - - $ make V=1 - - -Flashing --------- - -You can flash the generated code on the STM32-H103 board using OpenOCD: - - $ make flash - -Or you can do the same manually via: - - $ openocd -f interface/jtagkey-tiny.cfg -f board/olimex_stm32_h103.cfg - $ telnet localhost 4444 - > init - > reset halt - > flash write_image erase spi.hex - > reset - -Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or -replace "olimex_stm32_h103.cfg" with your respective board config file. - -- cgit v1.2.3