From d08ee7e33315e21d7b1d6ade1cabbcdf4616108c Mon Sep 17 00:00:00 2001 From: Thomas Otto Date: Tue, 11 May 2010 14:50:55 +0200 Subject: Changed examples to new rcc definitions. --- examples/other/i2c_stts75_sensor/i2c_stts75_sensor.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'examples/other/i2c_stts75_sensor/i2c_stts75_sensor.c') diff --git a/examples/other/i2c_stts75_sensor/i2c_stts75_sensor.c b/examples/other/i2c_stts75_sensor/i2c_stts75_sensor.c index fe70f8f..1227fd1 100644 --- a/examples/other/i2c_stts75_sensor/i2c_stts75_sensor.c +++ b/examples/other/i2c_stts75_sensor/i2c_stts75_sensor.c @@ -27,8 +27,8 @@ void usart_setup(void) { /* Enable clocks for GPIO port A (for GPIO_USART1_TX) and USART1. */ - rcc_peripheral_enable_clock(&RCC_APB2ENR, IOPAEN); - rcc_peripheral_enable_clock(&RCC_APB2ENR, USART1EN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_USART1EN); /* Setup GPIO pin GPIO_USART1_TX/GPIO9 on GPIO port A for transmit. */ gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ, @@ -49,7 +49,7 @@ void usart_setup(void) void gpio_setup(void) { /* Enable GPIOB clock. */ - rcc_peripheral_enable_clock(&RCC_APB2ENR, IOPBEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN); /* Set GPIO6/7 (in GPIO port B) to 'output push-pull' for the LEDs. */ gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_2_MHZ, @@ -61,8 +61,8 @@ void gpio_setup(void) void i2c_setup(void) { /* Enable clocks for I2C2 and AFIO. */ - rcc_peripheral_enable_clock(&RCC_APB1ENR, I2C2EN); - rcc_peripheral_enable_clock(&RCC_APB2ENR, AFIOEN); + rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_I2C2EN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN); /* Set alternate functions for the SCL and SDA pins of I2C2. */ gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ, -- cgit v1.2.3