From 01bfbfed411f9e96218070e2b36438b783df29ba Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Wed, 29 Dec 2010 19:49:59 +0100 Subject: Deduplicate example README file contents. --- examples/other/dma_mem2mem/README | 37 ------------------------------------- 1 file changed, 37 deletions(-) (limited to 'examples/other/dma_mem2mem/README') diff --git a/examples/other/dma_mem2mem/README b/examples/other/dma_mem2mem/README index c680b84..2e61e5a 100644 --- a/examples/other/dma_mem2mem/README +++ b/examples/other/dma_mem2mem/README @@ -9,40 +9,3 @@ USART1. The terminal settings for the receiving device/PC are 115200 8n1. - -Building --------- - - $ make - -Running 'make' on the top-level libopenstm32 directory will automatically -also build this example. Or you can build the library "manually" and -then run 'make' in this directory. - -You may want to override the toolchain (e.g., arm-elf or arm-none-eabi): - - $ PREFIX=arm-none-eabi make - -For a more verbose build you can use - - $ make V=1 - - -Flashing --------- - -You can flash the generated code using OpenOCD: - - $ make flash - -Or you can do the same manually via: - - $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg - $ telnet localhost 4444 - > reset halt - > flash write_image erase dma.hex - > reset - -Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or -replace "stm.cfg" with your respective config file. - -- cgit v1.2.3