From 05ccc0614a8c47d299f000fefe1382d00b7194a7 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Mon, 20 Jul 2009 16:52:05 +0200 Subject: Move the 'blink' example into a 'miniblink' subdirectory. --- examples/README | 47 ----------------------------------------------- 1 file changed, 47 deletions(-) delete mode 100644 examples/README (limited to 'examples/README') diff --git a/examples/README b/examples/README deleted file mode 100644 index a46e75a..0000000 --- a/examples/README +++ /dev/null @@ -1,47 +0,0 @@ ------------------------------------------------------------------------------- -README ------------------------------------------------------------------------------- - -This is a small example program using libopenstm32. - -It's intended for the ST STM32-based Olimex STM32-H103 eval board (see -http://olimex.com/dev/stm32-h103.html for details). It should blink -the LED on the board. - - -Building --------- - - $ make - -Running 'make' on the top-level libopenstm32 directory will automatically -also build this example. Or you can build the library "manually" and -then run 'make' in this directory. - -You may want to override the toolchain (e.g., arm-elf or arm-none-eabi): - - $ PREFIX=arm-none-eabi make - -For a more verbose build you can use - - $ make V=1 - - -Flashing --------- - -You can flash the generated code on the STM32-H103 board using OpenOCD: - - $ make flash - -Or you can do the same manually via: - - $ openocd -f interface/jtagkey-tiny.cfg -f board/olimex_stm32_h103.cfg - $ telnet localhost 4444 - > init - > reset halt - > flash write_image erase blink.bin 0x08000000 - > resume 0x08000000 - -Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using. - -- cgit v1.2.3