From 963588aba01c327757f73bf702466bb32224cfc6 Mon Sep 17 00:00:00 2001 From: Martin Mueller Date: Sun, 5 Dec 2010 23:59:12 +0100 Subject: Lisa/M board tests --- examples/Makefile | 10 +- examples/lisa-m/Makefile | 38 +++++ examples/lisa-m/usb_dfu/Makefile | 95 +++++++++++ examples/lisa-m/usb_dfu/README | 43 +++++ examples/lisa-m/usb_dfu/dfu.h | 81 +++++++++ examples/lisa-m/usb_dfu/usbdfu.c | 298 ++++++++++++++++++++++++++++++++++ examples/lisa-m/usb_dfu/usbdfu.ld | 29 ++++ examples/lisa-m/usb_hid/Makefile | 99 +++++++++++ examples/lisa-m/usb_hid/README | 43 +++++ examples/lisa-m/usb_hid/hid.h | 38 +++++ examples/lisa-m/usb_hid/usbhid.c | 286 ++++++++++++++++++++++++++++++++ examples/lisa-m/usb_hid/usbhid.ld | 32 ++++ examples/stm32-h103/Makefile | 12 +- examples/stm32-h103/usb_dfu/Makefile | 95 +++++++++++ examples/stm32-h103/usb_dfu/README | 43 +++++ examples/stm32-h103/usb_dfu/dfu.h | 81 +++++++++ examples/stm32-h103/usb_dfu/usbdfu.c | 298 ++++++++++++++++++++++++++++++++++ examples/stm32-h103/usb_dfu/usbdfu.ld | 29 ++++ examples/stm32-h103/usb_hid/Makefile | 98 +++++++++++ examples/stm32-h103/usb_hid/README | 43 +++++ examples/stm32-h103/usb_hid/hid.h | 38 +++++ examples/stm32-h103/usb_hid/usbhid.c | 267 ++++++++++++++++++++++++++++++ examples/stm32-h103/usb_hid/usbhid.ld | 32 ++++ examples/stm32-h103/usb_iap/Makefile | 98 +++++++++++ examples/stm32-h103/usb_iap/README | 42 +++++ examples/stm32-h103/usb_iap/usbiap.c | 298 ++++++++++++++++++++++++++++++++++ examples/stm32-h103/usb_iap/usbiap.ld | 32 ++++ 27 files changed, 2593 insertions(+), 5 deletions(-) create mode 100644 examples/lisa-m/Makefile create mode 100644 examples/lisa-m/usb_dfu/Makefile create mode 100644 examples/lisa-m/usb_dfu/README create mode 100644 examples/lisa-m/usb_dfu/dfu.h create mode 100644 examples/lisa-m/usb_dfu/usbdfu.c create mode 100644 examples/lisa-m/usb_dfu/usbdfu.ld create mode 100644 examples/lisa-m/usb_hid/Makefile create mode 100644 examples/lisa-m/usb_hid/README create mode 100644 examples/lisa-m/usb_hid/hid.h create mode 100644 examples/lisa-m/usb_hid/usbhid.c create mode 100644 examples/lisa-m/usb_hid/usbhid.ld create mode 100644 examples/stm32-h103/usb_dfu/Makefile create mode 100644 examples/stm32-h103/usb_dfu/README create mode 100644 examples/stm32-h103/usb_dfu/dfu.h create mode 100644 examples/stm32-h103/usb_dfu/usbdfu.c create mode 100644 examples/stm32-h103/usb_dfu/usbdfu.ld create mode 100644 examples/stm32-h103/usb_hid/Makefile create mode 100644 examples/stm32-h103/usb_hid/README create mode 100644 examples/stm32-h103/usb_hid/hid.h create mode 100644 examples/stm32-h103/usb_hid/usbhid.c create mode 100644 examples/stm32-h103/usb_hid/usbhid.ld create mode 100644 examples/stm32-h103/usb_iap/Makefile create mode 100644 examples/stm32-h103/usb_iap/README create mode 100644 examples/stm32-h103/usb_iap/usbiap.c create mode 100644 examples/stm32-h103/usb_iap/usbiap.ld diff --git a/examples/Makefile b/examples/Makefile index 9e4a396..0f772e2 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -24,7 +24,7 @@ Q := @ MAKEFLAGS += --no-print-directory endif -all: stm32-h103 mb525 other +all: stm32-h103 mb525 other lisa-m stm32-h103: @printf " BUILD examples/stm32-h103\n" @@ -34,6 +34,10 @@ mb525: @printf " BUILD examples/mb525\n" $(Q)$(MAKE) -C mb525 +lisa-m: + @printf " BUILD examples/lisa-m\n" + $(Q)$(MAKE) -C lisa-m + other: @printf " BUILD examples/other\n" $(Q)$(MAKE) -C other @@ -43,8 +47,10 @@ clean: $(Q)$(MAKE) -C stm32-h103 clean @printf " CLEAN examples/mb525\n" $(Q)$(MAKE) -C mb525 clean + @printf " CLEAN examples/lisa-m\n" + $(Q)$(MAKE) -C lisa-m clean @printf " CLEAN examples/other\n" $(Q)$(MAKE) -C other clean -.PHONY: stm32-h103 mb525 other clean +.PHONY: stm32-h103 mb525 lisa-m other clean diff --git a/examples/lisa-m/Makefile b/examples/lisa-m/Makefile new file mode 100644 index 0000000..c92f799 --- /dev/null +++ b/examples/lisa-m/Makefile @@ -0,0 +1,38 @@ +## +## This file is part of the libopenstm32 project. +## +## Copyright (C) 2009 Uwe Hermann +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 3 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see . +## + +# Be silent per default, but 'make V=1' will show all compiler calls. +ifneq ($(V),1) +Q := @ +# Do not print "Entering directory ...". +MAKEFLAGS += --no-print-directory +endif + +all: usb_hid + +usb_hid: + @printf " BUILD examples/stm32-h103/usb_hid\n" + $(Q)$(MAKE) -C usb_hid + +clean: + @printf " CLEAN examples/stm32-h103/usb_hid\n" + $(Q)$(MAKE) -C usb_hid clean + +.PHONY: usb_hid clean + diff --git a/examples/lisa-m/usb_dfu/Makefile b/examples/lisa-m/usb_dfu/Makefile new file mode 100644 index 0000000..775a991 --- /dev/null +++ b/examples/lisa-m/usb_dfu/Makefile @@ -0,0 +1,95 @@ +## +## This file is part of the libopenstm32 project. +## +## Copyright (C) 2009 Uwe Hermann +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 3 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see . +## + +BINARY = usbdfu + +# PREFIX ?= arm-none-eabi +PREFIX ?= arm-elf +CC = $(PREFIX)-gcc +LD = $(PREFIX)-gcc +OBJCOPY = $(PREFIX)-objcopy +OBJDUMP = $(PREFIX)-objdump +# Uncomment this line if you want to use the installed (not local) library. +#TOOLCHAIN_DIR = `dirname \`which $(CC)\``/.. +TOOLCHAIN_DIR = ../../.. +CFLAGS = -O0 -g3 -Wall -Wextra -I$(TOOLCHAIN_DIR)/include -fno-common \ + -mcpu=cortex-m3 -mthumb +LDSCRIPT = $(BINARY).ld +LDFLAGS = -L$(TOOLCHAIN_DIR)/lib -T$(LDSCRIPT) -nostartfiles -Wl,--defsym,_stack=0x20001000 +OBJS = $(BINARY).o + +OPENOCD_BASE = /usr +OPENOCD = $(OPENOCD_BASE)/bin/openocd +OPENOCD_SCRIPTS = $(OPENOCD_BASE)/share/openocd/scripts +OPENOCD_FLASHER = $(OPENOCD_SCRIPTS)/interface/jtagkey.cfg +OPENOCD_BOARD = $(OPENOCD_SCRIPTS)/target/stm32.cfg + +# Be silent per default, but 'make V=1' will show all compiler calls. +ifneq ($(V),1) +Q := @ +NULL := 2>/dev/null +endif + +all: images + +images: $(BINARY) + @printf " OBJCOPY $(BINARY).bin\n" + $(Q)$(OBJCOPY) -Obinary $(BINARY) $(BINARY).bin + @printf " OBJCOPY $(BINARY).hex\n" + $(Q)$(OBJCOPY) -Oihex $(BINARY) $(BINARY).hex + @printf " OBJCOPY $(BINARY).srec\n" + $(Q)$(OBJCOPY) -Osrec $(BINARY) $(BINARY).srec + @printf " OBJDUMP $(BINARY).list\n" + $(Q)$(OBJDUMP) -S $(BINARY) > $(BINARY).list + +$(BINARY): $(OBJS) $(LDSCRIPT) + @printf " LD $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS) -lopenstm32 + +%.o: %.c Makefile + @printf " CC $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(CC) $(CFLAGS) -o $@ -c $< + +clean: + @printf " CLEAN $(subst $(shell pwd)/,,$(OBJS))\n" + $(Q)rm -f *.o + @printf " CLEAN $(BINARY)\n" + $(Q)rm -f $(BINARY) + @printf " CLEAN $(BINARY).bin\n" + $(Q)rm -f $(BINARY).bin + @printf " CLEAN $(BINARY).hex\n" + $(Q)rm -f $(BINARY).hex + @printf " CLEAN $(BINARY).srec\n" + $(Q)rm -f $(BINARY).srec + @printf " CLEAN $(BINARY).list\n" + $(Q)rm -f $(BINARY).list + +flash: images + @printf " FLASH $(BINARY).bin\n" + @# IMPORTANT: Don't use "resume", only "reset" will work correctly! + $(Q)$(OPENOCD) -s $(OPENOCD_SCRIPTS) \ + -f $(OPENOCD_FLASHER) \ + -f $(OPENOCD_BOARD) \ + -c "init" -c "reset halt" \ + -c "flash write_image erase $(BINARY).hex" \ + -c "reset" \ + -c "shutdown" $(NULL) + +.PHONY: images clean + diff --git a/examples/lisa-m/usb_dfu/README b/examples/lisa-m/usb_dfu/README new file mode 100644 index 0000000..7146618 --- /dev/null +++ b/examples/lisa-m/usb_dfu/README @@ -0,0 +1,43 @@ +------------------------------------------------------------------------------ +README +------------------------------------------------------------------------------ + +This example implements a USB Device Firmware Upgrade (DFU) bootloader +to demonstrate the use of the USB device stack. + +Building +-------- + + $ make + +Running 'make' on the top-level libopenstm32 directory will automatically +also build this example. Or you can build the library "manually" and +then run 'make' in this directory. + +You may want to override the toolchain (e.g., arm-elf or arm-none-eabi): + + $ PREFIX=arm-none-eabi make + +For a more verbose build you can use + + $ make V=1 + + +Flashing +-------- + +You can flash the generated code using OpenOCD: + + $ make flash + +Or you can do the same manually via: + + $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg + $ telnet localhost 4444 + > reset halt + > flash write_image erase systick.hex + > reset + +Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or +replace "stm.cfg" with your respective config file. + diff --git a/examples/lisa-m/usb_dfu/dfu.h b/examples/lisa-m/usb_dfu/dfu.h new file mode 100644 index 0000000..e4e4b23 --- /dev/null +++ b/examples/lisa-m/usb_dfu/dfu.h @@ -0,0 +1,81 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Gareth McMullin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef __DFU_H +#define __DFU_H + +enum dfu_req { + DFU_DETACH, + DFU_DNLOAD, + DFU_UPLOAD, + DFU_GETSTATUS, + DFU_CLRSTATUS, + DFU_GETSTATE, + DFU_ABORT +}; + +enum dfu_status { + DFU_STATUS_OK, + DFU_STATUS_ERR_TARGET, + DFU_STATUS_ERR_FILE, + DFU_STATUS_ERR_WRITE, + DFU_STATUS_ERR_ERASE, + DFU_STATUS_ERR_CHECK_ERASED, + DFU_STATUS_ERR_PROG, + DFU_STATUS_ERR_VERIFY, + DFU_STATUS_ERR_ADDRESS, + DFU_STATUS_ERR_NOTDONE, + DFU_STATUS_ERR_FIRMWARE, + DFU_STATUS_ERR_VENDOR, + DFU_STATUS_ERR_USBR, + DFU_STATUS_ERR_POR, + DFU_STATUS_ERR_UNKNOWN, + DFU_STATUS_ERR_STALLEDPKT, +}; + +enum dfu_state { + STATE_APP_IDLE, + STATE_APP_DETACH, + STATE_DFU_IDLE, + STATE_DFU_DNLOAD_SYNC, + STATE_DFU_DNBUSY, + STATE_DFU_DNLOAD_IDLE, + STATE_DFU_MANIFEST_SYNC, + STATE_DFU_MANIFEST, + STATE_DFU_MANIFEST_WAIT_RESET, + STATE_DFU_UPLOAD_IDLE, + STATE_DFU_ERROR, +}; + +#define DFU_FUNCTIONAL 0x21 +struct usb_dfu_descriptor { + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bmAttributes; +#define USB_DFU_CAN_DOWNLOAD 0x01 +#define USB_DFU_CAN_UPLOAD 0x02 +#define USB_DFU_MANIFEST_TOLERANT 0x04 +#define USB_DFU_WILL_DETACH 0x08 + + uint16_t wDetachTimeout; + uint16_t wTransferSize; + uint16_t bcdDFUVersion; +} __attribute__((packed)); + +#endif diff --git a/examples/lisa-m/usb_dfu/usbdfu.c b/examples/lisa-m/usb_dfu/usbdfu.c new file mode 100644 index 0000000..9e72318 --- /dev/null +++ b/examples/lisa-m/usb_dfu/usbdfu.c @@ -0,0 +1,298 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Gareth McMullin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include + +#include + +#include "dfu.h" + +#define APP_ADDRESS 0x08002000 + +/* Commands sent with wBlockNum == 0 as per ST implementation. */ +#define CMD_SETADDR 0x21 +#define CMD_ERASE 0x41 + +/* We need a special large control buffer for this device: */ +u8 usbd_control_buffer[1024]; + +static enum dfu_state usbdfu_state = STATE_DFU_IDLE; + +static struct { + u8 buf[sizeof(usbd_control_buffer)]; + u16 len; + u32 addr; + u16 blocknum; +} prog; + +const struct usb_device_descriptor dev = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .bMaxPacketSize0 = 64, + .idVendor = 0x0483, + .idProduct = 0xDF11, + .bcdDevice = 0x0200, + .iManufacturer = 1, + .iProduct = 2, + .iSerialNumber = 3, + .bNumConfigurations = 1, +}; + +const struct usb_dfu_descriptor dfu_function = { + .bLength = sizeof(struct usb_dfu_descriptor), + .bDescriptorType = DFU_FUNCTIONAL, + .bmAttributes = USB_DFU_CAN_DOWNLOAD | USB_DFU_WILL_DETACH, + .wDetachTimeout = 255, + .wTransferSize = 1024, + .bcdDFUVersion = 0x011A, +}; + +const struct usb_interface_descriptor iface = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = 0xFE, /* Device Firmware Upgrade */ + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 2, + + /* The ST Microelectronics DfuSe application needs this string. + * The format isn't documented... */ + .iInterface = 4, + + .extra = &dfu_function, + .extralen = sizeof(dfu_function), +}; + +const struct usb_interface ifaces[] = {{ + .num_altsetting = 1, + .altsetting = &iface, +}}; + +const struct usb_config_descriptor config = { + .bLength = USB_DT_CONFIGURATION_SIZE, + .bDescriptorType = USB_DT_CONFIGURATION, + .wTotalLength = 0, + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = 0xC0, + .bMaxPower = 0x32, + + .interface = ifaces, +}; + +static const char *usb_strings[] = { + "x", + "Black Sphere Technologies", + "DFU Demo", + "DEMO", + /* This string is used by ST Microelectronics' DfuSe utility */ + "@Internal Flash /0x08000000/8*001Ka,56*001Kg" +}; + +static u8 usbdfu_getstatus(u32 *bwPollTimeout) +{ + switch(usbdfu_state) { + case STATE_DFU_DNLOAD_SYNC: + usbdfu_state = STATE_DFU_DNBUSY; + *bwPollTimeout = 100; + return DFU_STATUS_OK; + + case STATE_DFU_MANIFEST_SYNC: + /* Device will reset when read is complete */ + usbdfu_state = STATE_DFU_MANIFEST; + return DFU_STATUS_OK; + + default: + return DFU_STATUS_OK; + } +} + +static void usbdfu_getstatus_complete(struct usb_setup_data *req) +{ + int i; + (void)req; + + switch(usbdfu_state) { + case STATE_DFU_DNBUSY: + + flash_unlock(); + if(prog.blocknum == 0) { + switch(prog.buf[0]) { + case CMD_ERASE: + flash_erase_page(*(u32*)(prog.buf+1)); + case CMD_SETADDR: + prog.addr = *(u32*)(prog.buf+1); + } + } else { + u32 baseaddr = prog.addr + + ((prog.blocknum - 2) * + dfu_function.wTransferSize); + for(i = 0; i < prog.len; i += 2) + flash_program_half_word(baseaddr + i, + *(u16*)(prog.buf+i)); + } + flash_lock(); + + /* We jump straight to dfuDNLOAD-IDLE, + * skipping dfuDNLOAD-SYNC + */ + usbdfu_state = STATE_DFU_DNLOAD_IDLE; + return; + + case STATE_DFU_MANIFEST: + /* USB device must detach, we just reset... */ + scb_reset_system(); + return; /* Will never return */ + default: + return; + } +} + +static int usbdfu_control_command(struct usb_setup_data *req, + void (**complete)(struct usb_setup_data *req)) +{ + (void)complete; + + if(req->bmRequestType != 0x21) + return 0; /* Only accept class request */ + + switch(req->bRequest) { + case DFU_DNLOAD: + usbdfu_state = STATE_DFU_MANIFEST_SYNC; + return 1; + case DFU_CLRSTATUS: + /* Clear error and return to dfuIDLE */ + if(usbdfu_state == STATE_DFU_ERROR) + usbdfu_state = STATE_DFU_IDLE; + return 1; + case DFU_ABORT: + /* Abort returns to dfuIDLE state */ + usbdfu_state = STATE_DFU_IDLE; + return 1; + } + + return 0; +} + +static int usbdfu_control_read(struct usb_setup_data *req, u8 **buf, u16 *len, + void (**complete)(struct usb_setup_data *req)) +{ + + if(req->bmRequestType != 0xA1) + return 0; /* Only accept class request */ + + switch(req->bRequest) { + case DFU_UPLOAD: + /* Upload not supported for now */ + return 0; + case DFU_GETSTATUS: { + u32 bwPollTimeout = 0; /* 24-bit integer in DFU class spec */ + + (*buf)[0] = usbdfu_getstatus(&bwPollTimeout); + (*buf)[1] = bwPollTimeout & 0xFF; + (*buf)[2] = (bwPollTimeout >> 8) & 0xFF; + (*buf)[3] = (bwPollTimeout >> 16) & 0xFF; + (*buf)[4] = usbdfu_state; + (*buf)[5] = 0; /* iString not used here */ + *len = 6; + + *complete = usbdfu_getstatus_complete; + + return 1; + } + case DFU_GETSTATE: + /* Return state with no state transision */ + *buf[0] = usbdfu_state; + *len = 1; + return 1; + } + + return 0; +} + +static int usbdfu_control_write(struct usb_setup_data *req, u8 *buf, u16 len, + void (**complete)(struct usb_setup_data *req)) +{ + (void)complete; + + if(req->bmRequestType != 0x21) + return 0; /* Only accept class request */ + + if(req->bRequest != DFU_DNLOAD) + return 0; + + /* Copy download data for use on GET_STATUS */ + prog.blocknum = req->wValue; + prog.len = len; + memcpy(prog.buf, buf, len); + usbdfu_state = STATE_DFU_DNLOAD_SYNC; + + return 1; +} + +int main(void) +{ + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN); + if(!gpio_get(GPIOA, GPIO10)) { + /* Boot the application if it's valid */ + if((*(volatile u32*)APP_ADDRESS & 0x2FFE0000) == 0x20000000) { + /* Set vector table base address */ + SCB_VTOR = APP_ADDRESS & 0xFFFF; + /* Initialise master stack pointer */ + asm volatile ("msr msp, %0"::"g" + (*(volatile u32*)APP_ADDRESS)); + /* Jump to application */ + (*(void(**)())(APP_ADDRESS + 4))(); + } + } + + rcc_clock_setup_in_hsi_out_48mhz(); + + rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USBEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN); + + AFIO_MAPR |= AFIO_MAPR_SWJ_CFG_JTAG_OFF_SW_ON; + gpio_set_mode(GPIOA, GPIO_MODE_INPUT, 0, GPIO15); + + usbd_init(&dev, &config, usb_strings); + usbd_set_control_buffer_size(sizeof(usbd_control_buffer)); + usbd_register_control_command_callback(usbdfu_control_command); + usbd_register_control_write_callback(usbdfu_control_write); + usbd_register_control_read_callback(usbdfu_control_read); + + gpio_set(GPIOA, GPIO15); + gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ, + GPIO_CNF_OUTPUT_PUSHPULL, GPIO15); + + while (1) + usbd_poll(); +} + diff --git a/examples/lisa-m/usb_dfu/usbdfu.ld b/examples/lisa-m/usb_dfu/usbdfu.ld new file mode 100644 index 0000000..d7cd0c5 --- /dev/null +++ b/examples/lisa-m/usb_dfu/usbdfu.ld @@ -0,0 +1,29 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Thomas Otto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Define memory regions. */ +MEMORY +{ + rom (rx) : ORIGIN = 0x08000000, LENGTH =8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 4K +} + +/* Include the common ld script from libopenstm32. */ +INCLUDE libopenstm32.ld + diff --git a/examples/lisa-m/usb_hid/Makefile b/examples/lisa-m/usb_hid/Makefile new file mode 100644 index 0000000..10f3d65 --- /dev/null +++ b/examples/lisa-m/usb_hid/Makefile @@ -0,0 +1,99 @@ +## +## This file is part of the libopenstm32 project. +## +## Copyright (C) 2009 Uwe Hermann +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 3 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see . +## + +BINARY = usbhid + +PREFIX=/opt/paparazzi/stm32/bin/arm-none-eabi +# PREFIX ?= arm-none-eabi +#PREFIX ?= arm-elf +CC = $(PREFIX)-gcc +LD = $(PREFIX)-gcc +OBJCOPY = $(PREFIX)-objcopy +OBJDUMP = $(PREFIX)-objdump +# Uncomment this line if you want to use the installed (not local) library. +#TOOLCHAIN_DIR = `dirname \`which $(CC)\``/.. +TOOLCHAIN_DIR = ../../.. +CFLAGS = -O0 -g -Wall -Wextra -I$(TOOLCHAIN_DIR)/include -fno-common \ + -mcpu=cortex-m3 -mthumb +LDSCRIPT = $(BINARY).ld +LDFLAGS = -L$(TOOLCHAIN_DIR)/lib -T$(LDSCRIPT) -nostartfiles +OBJS = $(BINARY).o + +#OPENOCD_BASE = /usr +OPENOCD_BASE = /opt/paparazzi/stm32 +OPENOCD = $(OPENOCD_BASE)/bin/openocd +OPENOCD_SCRIPTS = $(OPENOCD_BASE)/share/openocd/scripts +#OPENOCD_FLASHER = $(OPENOCD_SCRIPTS)/interface/openocd-usb.cfg +OPENOCD_FLASHER = $(OPENOCD_SCRIPTS)/interface/jtagkey-tiny.cfg +#OPENOCD_BOARD = $(OPENOCD_SCRIPTS)/board/paparazzi_lisa_m.cfg +OPENOCD_BOARD = /opt/paparazzi/stm32/share/openocd/scripts/board/lisa-l.cfg + +# Be silent per default, but 'make V=1' will show all compiler calls. +ifneq ($(V),1) +Q := @ +NULL := 2>/dev/null +endif + +all: images + +images: $(BINARY) + @printf " OBJCOPY $(BINARY).bin\n" + $(Q)$(OBJCOPY) -Obinary $(BINARY) $(BINARY).bin + @printf " OBJCOPY $(BINARY).hex\n" + $(Q)$(OBJCOPY) -Oihex $(BINARY) $(BINARY).hex + @printf " OBJCOPY $(BINARY).srec\n" + $(Q)$(OBJCOPY) -Osrec $(BINARY) $(BINARY).srec + @printf " OBJDUMP $(BINARY).list\n" + $(Q)$(OBJDUMP) -S $(BINARY) > $(BINARY).list + +$(BINARY): $(OBJS) $(LDSCRIPT) + @printf " LD $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS) -lopenstm32 + +%.o: %.c Makefile + @printf " CC $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(CC) $(CFLAGS) -o $@ -c $< + +clean: + @printf " CLEAN $(subst $(shell pwd)/,,$(OBJS))\n" + $(Q)rm -f *.o + @printf " CLEAN $(BINARY)\n" + $(Q)rm -f $(BINARY) + @printf " CLEAN $(BINARY).bin\n" + $(Q)rm -f $(BINARY).bin + @printf " CLEAN $(BINARY).hex\n" + $(Q)rm -f $(BINARY).hex + @printf " CLEAN $(BINARY).srec\n" + $(Q)rm -f $(BINARY).srec + @printf " CLEAN $(BINARY).list\n" + $(Q)rm -f $(BINARY).list + +flash: images + @printf " FLASH $(BINARY).bin\n" + @# IMPORTANT: Don't use "resume", only "reset" will work correctly! + $(Q)$(OPENOCD) -s $(OPENOCD_SCRIPTS) \ + -f $(OPENOCD_FLASHER) \ + -f $(OPENOCD_BOARD) \ + -c "init" -c "reset halt" \ + -c "flash write_image erase $(BINARY).hex" \ + -c "reset" \ + -c "shutdown" $(NULL) + +.PHONY: images clean + diff --git a/examples/lisa-m/usb_hid/README b/examples/lisa-m/usb_hid/README new file mode 100644 index 0000000..3ba2aa6 --- /dev/null +++ b/examples/lisa-m/usb_hid/README @@ -0,0 +1,43 @@ +------------------------------------------------------------------------------ +README +------------------------------------------------------------------------------ + +This example implements a USB Human Interface Device (HID) +to demonstrate the use of the USB device stack. + +Building +-------- + + $ make + +Running 'make' on the top-level libopenstm32 directory will automatically +also build this example. Or you can build the library "manually" and +then run 'make' in this directory. + +You may want to override the toolchain (e.g., arm-elf or arm-none-eabi): + + $ PREFIX=arm-none-eabi make + +For a more verbose build you can use + + $ make V=1 + + +Flashing +-------- + +You can flash the generated code using OpenOCD: + + $ make flash + +Or you can do the same manually via: + + $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg + $ telnet localhost 4444 + > reset halt + > flash write_image erase systick.hex + > reset + +Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or +replace "stm.cfg" with your respective config file. + diff --git a/examples/lisa-m/usb_hid/hid.h b/examples/lisa-m/usb_hid/hid.h new file mode 100644 index 0000000..4690103 --- /dev/null +++ b/examples/lisa-m/usb_hid/hid.h @@ -0,0 +1,38 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Gareth McMullin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef __HID_H +#define __HID_H + +#include + +#define USB_CLASS_HID 3 + +#define USB_DT_HID 0x21 +#define USB_DT_REPORT 0x22 + +struct usb_hid_descriptor { + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t bcdHID; + uint8_t bCountryCode; + uint8_t bNumDescriptors; +} __attribute__((packed)); + +#endif + diff --git a/examples/lisa-m/usb_hid/usbhid.c b/examples/lisa-m/usb_hid/usbhid.c new file mode 100644 index 0000000..721a1e7 --- /dev/null +++ b/examples/lisa-m/usb_hid/usbhid.c @@ -0,0 +1,286 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Gareth McMullin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include + +#include + +#include "hid.h" + +/* Define this to include the DFU APP interface. */ +#define INCLUDE_DFU_INTERFACE + +#ifdef INCLUDE_DFU_INTERFACE +# include +# include "../usb_dfu/dfu.h" +#endif + +const struct usb_device_descriptor dev = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .bMaxPacketSize0 = 64, + .idVendor = 0x0483, + .idProduct = 0x5710, + .bcdDevice = 0x0200, + .iManufacturer = 1, + .iProduct = 2, + .iSerialNumber = 3, + .bNumConfigurations = 1, +}; + +/* I have no idea what this means. I haven't read the HID spec. */ +static const u8 hid_report_descriptor[] = { + 0x05, 0x01, 0x09, 0x02, 0xA1, 0x01, 0x09, 0x01, + 0xA1, 0x00, 0x05, 0x09, 0x19, 0x01, 0x29, 0x03, + 0x15, 0x00, 0x25, 0x01, 0x95, 0x03, 0x75, 0x01, + 0x81, 0x02, 0x95, 0x01, 0x75, 0x05, 0x81, 0x01, + 0x05, 0x01, 0x09, 0x30, 0x09, 0x31, 0x09, 0x38, + 0x15, 0x81, 0x25, 0x7F, 0x75, 0x08, 0x95, 0x03, + 0x81, 0x06, 0xC0, 0x09, 0x3c, 0x05, 0xff, 0x09, + 0x01, 0x15, 0x00, 0x25, 0x01, 0x75, 0x01, 0x95, + 0x02, 0xb1, 0x22, 0x75, 0x06, 0x95, 0x01, 0xb1, + 0x01, 0xc0 +}; + +static const struct { + struct usb_hid_descriptor hid_descriptor; + struct { + uint8_t bReportDescriptorType; + uint16_t wDescriptorLength; + } __attribute__((packed)) hid_report; +} __attribute__((packed)) hid_function = { + .hid_descriptor = { + .bLength = sizeof(hid_function), + .bDescriptorType = USB_DT_HID, + .bcdHID = 0x0100, + .bCountryCode = 0, + .bNumDescriptors = 1, + }, + .hid_report = { + .bReportDescriptorType = USB_DT_REPORT, + .wDescriptorLength = sizeof(hid_report_descriptor), + } +}; + +const struct usb_endpoint_descriptor hid_endpoint = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x81, + .bmAttributes = USB_ENDPOINT_ATTR_INTERRUPT, + .wMaxPacketSize = 4, + .bInterval = 0x20, +}; + +const struct usb_interface_descriptor hid_iface = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_HID, + .bInterfaceSubClass = 1, /* boot */ + .bInterfaceProtocol = 2, /* mouse */ + .iInterface = 0, + + .endpoint = &hid_endpoint, + + .extra = &hid_function, + .extralen = sizeof(hid_function), +}; + +#ifdef INCLUDE_DFU_INTERFACE +const struct usb_dfu_descriptor dfu_function = { + .bLength = sizeof(struct usb_dfu_descriptor), + .bDescriptorType = DFU_FUNCTIONAL, + .bmAttributes = USB_DFU_CAN_DOWNLOAD | USB_DFU_WILL_DETACH, + .wDetachTimeout = 255, + .wTransferSize = 1024, + .bcdDFUVersion = 0x011A, +}; + +const struct usb_interface_descriptor dfu_iface = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 1, + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = 0xFE, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 1, + .iInterface = 0, + + .extra = &dfu_function, + .extralen = sizeof(dfu_function), +}; +#endif + +const struct usb_interface ifaces[] = {{ + .num_altsetting = 1, + .altsetting = &hid_iface, +#ifdef INCLUDE_DFU_INTERFACE +}, { + .num_altsetting = 1, + .altsetting = &dfu_iface, +#endif +}}; + +const struct usb_config_descriptor config = { + .bLength = USB_DT_CONFIGURATION_SIZE, + .bDescriptorType = USB_DT_CONFIGURATION, + .wTotalLength = 0, +#ifdef INCLUDE_DFU_INTERFACE + .bNumInterfaces = 2, +#else + .bNumInterfaces = 1, +#endif + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = 0xC0, + .bMaxPower = 0x32, + + .interface = ifaces, +}; + +static const char *usb_strings[] = { + "x", + "Black Sphere Technologies", + "HID Demo", + "DEMO", +}; + +static int hid_control_read(struct usb_setup_data *req, u8 **buf, u16 *len, + void (**complete)(struct usb_setup_data *req)) +{ + (void)complete; + + if((req->bmRequestType != 0x81) || + (req->bRequest != USB_REQ_GET_DESCRIPTOR) || + (req->wValue != 0x2200)) + return 0; + + /* Handle the HID report descriptor */ + *buf = (u8*)hid_report_descriptor; + *len = sizeof(hid_report_descriptor); + + return 1; +} + +#ifdef INCLUDE_DFU_INTERFACE +static void dfu_detach_complete(struct usb_setup_data *req) +{ + (void)req; + + gpio_set_mode(GPIOA, GPIO_MODE_INPUT, 0, GPIO15); + gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ, + GPIO_CNF_OUTPUT_PUSHPULL, GPIO10); + gpio_set(GPIOA, GPIO10); + scb_reset_core(); +} + +static int dfu_control_command(struct usb_setup_data *req, + void (**complete)(struct usb_setup_data *req)) +{ + if((req->bmRequestType != 0x21) || (req->bRequest != DFU_DETACH)) + return 0; /* Only accept class request */ + + *complete = dfu_detach_complete; + + return 1; +} +#endif + +static void hid_set_config(u16 wValue) +{ + (void)wValue; + + usbd_ep_setup(0x81, USB_ENDPOINT_ATTR_INTERRUPT, 4, NULL); + + usbd_register_control_read_callback(hid_control_read); +#ifdef INCLUDE_DFU_INTERFACE + usbd_register_control_command_callback(dfu_control_command); +#endif + + systick_set_clocksource(STK_CTRL_CLKSOURCE_AHB_DIV8); + systick_set_reload(100000); + systick_interrupt_enable(); + systick_counter_enable(); +} + +int main(void) +{ + rcc_clock_setup_in_hsi_out_48mhz(); + + + rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USBEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN); + + /* USB_DETECT as input */ + gpio_set_mode(GPIOA, GPIO_MODE_INPUT, + GPIO_CNF_INPUT_FLOAT, GPIO8); + + /* disconnect USB_DISC, as output */ + gpio_set(GPIOC, GPIO15); + gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_2_MHZ, + GPIO_CNF_OUTPUT_PUSHPULL, GPIO15); + + /* green LED off, as output */ + gpio_clear(GPIOC, GPIO13); + gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_2_MHZ, + GPIO_CNF_OUTPUT_PUSHPULL, GPIO13); + + + usbd_init(&dev, &config, usb_strings); + usbd_register_set_config_callback(hid_set_config); + + /* delay some seconds to show that pull-up switch works */ + {int i; for (i=0;i<0x800000;i++);} + + /* wait for USB Vbus */ + while(gpio_get(GPIOA, GPIO8) == 0); + + /* green LED on, connect USB */ + gpio_set(GPIOC, GPIO13); + gpio_clear(GPIOC, GPIO15); + + while (1) + usbd_poll(); +} + +void sys_tick_handler(void) +{ + static int x = 0; + static int dir = 1; + uint8_t buf[4] = {0, 0, 0, 0}; + + buf[1] = dir; + x += dir; + if(x > 30) dir = -dir; + if(x < -30) dir = -dir; + + usbd_ep_write_packet(0x81, buf, 4); +} + diff --git a/examples/lisa-m/usb_hid/usbhid.ld b/examples/lisa-m/usb_hid/usbhid.ld new file mode 100644 index 0000000..a393e0b --- /dev/null +++ b/examples/lisa-m/usb_hid/usbhid.ld @@ -0,0 +1,32 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Thomas Otto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Linker script for Olimex STM32-H103 (STM32F103RBT6, 128K flash, 20K RAM). */ + +/* Define memory regions. */ +MEMORY +{ + rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K +} + + +/* Include the common ld script from libopenstm32. */ +INCLUDE libopenstm32.ld + diff --git a/examples/stm32-h103/Makefile b/examples/stm32-h103/Makefile index 65fb97d..bd3a2d8 100644 --- a/examples/stm32-h103/Makefile +++ b/examples/stm32-h103/Makefile @@ -24,7 +24,7 @@ Q := @ MAKEFLAGS += --no-print-directory endif -all: miniblink fancyblink usart usb_cdcacm +all: miniblink fancyblink usart usb_cdcacm usb_hid miniblink: @printf " BUILD examples/stm32-h103/miniblink\n" @@ -44,7 +44,11 @@ spi: usb_cdcacm: @printf " BUILD examples/stm32-h103/usb_cdcacm\n" - $(Q)$(MAKE) -C spi + $(Q)$(MAKE) -C usb_cdcacm + +usb_hid: + @printf " BUILD examples/stm32-h103/usb_hid\n" + $(Q)$(MAKE) -C usb_hid clean: @printf " CLEAN examples/stm32-h103/miniblink\n" @@ -57,6 +61,8 @@ clean: $(Q)$(MAKE) -C spi clean @printf " CLEAN examples/stm32-h103/usb_cdcacm\n" $(Q)$(MAKE) -C usb_cdcacm clean + @printf " CLEAN examples/stm32-h103/usb_hid\n" + $(Q)$(MAKE) -C usb_hid clean -.PHONY: miniblink fancyblink usart spi usb_cdcacm clean +.PHONY: miniblink fancyblink usart spi usb_cdcacm usb_hid clean diff --git a/examples/stm32-h103/usb_dfu/Makefile b/examples/stm32-h103/usb_dfu/Makefile new file mode 100644 index 0000000..775a991 --- /dev/null +++ b/examples/stm32-h103/usb_dfu/Makefile @@ -0,0 +1,95 @@ +## +## This file is part of the libopenstm32 project. +## +## Copyright (C) 2009 Uwe Hermann +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 3 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see . +## + +BINARY = usbdfu + +# PREFIX ?= arm-none-eabi +PREFIX ?= arm-elf +CC = $(PREFIX)-gcc +LD = $(PREFIX)-gcc +OBJCOPY = $(PREFIX)-objcopy +OBJDUMP = $(PREFIX)-objdump +# Uncomment this line if you want to use the installed (not local) library. +#TOOLCHAIN_DIR = `dirname \`which $(CC)\``/.. +TOOLCHAIN_DIR = ../../.. +CFLAGS = -O0 -g3 -Wall -Wextra -I$(TOOLCHAIN_DIR)/include -fno-common \ + -mcpu=cortex-m3 -mthumb +LDSCRIPT = $(BINARY).ld +LDFLAGS = -L$(TOOLCHAIN_DIR)/lib -T$(LDSCRIPT) -nostartfiles -Wl,--defsym,_stack=0x20001000 +OBJS = $(BINARY).o + +OPENOCD_BASE = /usr +OPENOCD = $(OPENOCD_BASE)/bin/openocd +OPENOCD_SCRIPTS = $(OPENOCD_BASE)/share/openocd/scripts +OPENOCD_FLASHER = $(OPENOCD_SCRIPTS)/interface/jtagkey.cfg +OPENOCD_BOARD = $(OPENOCD_SCRIPTS)/target/stm32.cfg + +# Be silent per default, but 'make V=1' will show all compiler calls. +ifneq ($(V),1) +Q := @ +NULL := 2>/dev/null +endif + +all: images + +images: $(BINARY) + @printf " OBJCOPY $(BINARY).bin\n" + $(Q)$(OBJCOPY) -Obinary $(BINARY) $(BINARY).bin + @printf " OBJCOPY $(BINARY).hex\n" + $(Q)$(OBJCOPY) -Oihex $(BINARY) $(BINARY).hex + @printf " OBJCOPY $(BINARY).srec\n" + $(Q)$(OBJCOPY) -Osrec $(BINARY) $(BINARY).srec + @printf " OBJDUMP $(BINARY).list\n" + $(Q)$(OBJDUMP) -S $(BINARY) > $(BINARY).list + +$(BINARY): $(OBJS) $(LDSCRIPT) + @printf " LD $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS) -lopenstm32 + +%.o: %.c Makefile + @printf " CC $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(CC) $(CFLAGS) -o $@ -c $< + +clean: + @printf " CLEAN $(subst $(shell pwd)/,,$(OBJS))\n" + $(Q)rm -f *.o + @printf " CLEAN $(BINARY)\n" + $(Q)rm -f $(BINARY) + @printf " CLEAN $(BINARY).bin\n" + $(Q)rm -f $(BINARY).bin + @printf " CLEAN $(BINARY).hex\n" + $(Q)rm -f $(BINARY).hex + @printf " CLEAN $(BINARY).srec\n" + $(Q)rm -f $(BINARY).srec + @printf " CLEAN $(BINARY).list\n" + $(Q)rm -f $(BINARY).list + +flash: images + @printf " FLASH $(BINARY).bin\n" + @# IMPORTANT: Don't use "resume", only "reset" will work correctly! + $(Q)$(OPENOCD) -s $(OPENOCD_SCRIPTS) \ + -f $(OPENOCD_FLASHER) \ + -f $(OPENOCD_BOARD) \ + -c "init" -c "reset halt" \ + -c "flash write_image erase $(BINARY).hex" \ + -c "reset" \ + -c "shutdown" $(NULL) + +.PHONY: images clean + diff --git a/examples/stm32-h103/usb_dfu/README b/examples/stm32-h103/usb_dfu/README new file mode 100644 index 0000000..7146618 --- /dev/null +++ b/examples/stm32-h103/usb_dfu/README @@ -0,0 +1,43 @@ +------------------------------------------------------------------------------ +README +------------------------------------------------------------------------------ + +This example implements a USB Device Firmware Upgrade (DFU) bootloader +to demonstrate the use of the USB device stack. + +Building +-------- + + $ make + +Running 'make' on the top-level libopenstm32 directory will automatically +also build this example. Or you can build the library "manually" and +then run 'make' in this directory. + +You may want to override the toolchain (e.g., arm-elf or arm-none-eabi): + + $ PREFIX=arm-none-eabi make + +For a more verbose build you can use + + $ make V=1 + + +Flashing +-------- + +You can flash the generated code using OpenOCD: + + $ make flash + +Or you can do the same manually via: + + $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg + $ telnet localhost 4444 + > reset halt + > flash write_image erase systick.hex + > reset + +Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or +replace "stm.cfg" with your respective config file. + diff --git a/examples/stm32-h103/usb_dfu/dfu.h b/examples/stm32-h103/usb_dfu/dfu.h new file mode 100644 index 0000000..e4e4b23 --- /dev/null +++ b/examples/stm32-h103/usb_dfu/dfu.h @@ -0,0 +1,81 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Gareth McMullin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef __DFU_H +#define __DFU_H + +enum dfu_req { + DFU_DETACH, + DFU_DNLOAD, + DFU_UPLOAD, + DFU_GETSTATUS, + DFU_CLRSTATUS, + DFU_GETSTATE, + DFU_ABORT +}; + +enum dfu_status { + DFU_STATUS_OK, + DFU_STATUS_ERR_TARGET, + DFU_STATUS_ERR_FILE, + DFU_STATUS_ERR_WRITE, + DFU_STATUS_ERR_ERASE, + DFU_STATUS_ERR_CHECK_ERASED, + DFU_STATUS_ERR_PROG, + DFU_STATUS_ERR_VERIFY, + DFU_STATUS_ERR_ADDRESS, + DFU_STATUS_ERR_NOTDONE, + DFU_STATUS_ERR_FIRMWARE, + DFU_STATUS_ERR_VENDOR, + DFU_STATUS_ERR_USBR, + DFU_STATUS_ERR_POR, + DFU_STATUS_ERR_UNKNOWN, + DFU_STATUS_ERR_STALLEDPKT, +}; + +enum dfu_state { + STATE_APP_IDLE, + STATE_APP_DETACH, + STATE_DFU_IDLE, + STATE_DFU_DNLOAD_SYNC, + STATE_DFU_DNBUSY, + STATE_DFU_DNLOAD_IDLE, + STATE_DFU_MANIFEST_SYNC, + STATE_DFU_MANIFEST, + STATE_DFU_MANIFEST_WAIT_RESET, + STATE_DFU_UPLOAD_IDLE, + STATE_DFU_ERROR, +}; + +#define DFU_FUNCTIONAL 0x21 +struct usb_dfu_descriptor { + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bmAttributes; +#define USB_DFU_CAN_DOWNLOAD 0x01 +#define USB_DFU_CAN_UPLOAD 0x02 +#define USB_DFU_MANIFEST_TOLERANT 0x04 +#define USB_DFU_WILL_DETACH 0x08 + + uint16_t wDetachTimeout; + uint16_t wTransferSize; + uint16_t bcdDFUVersion; +} __attribute__((packed)); + +#endif diff --git a/examples/stm32-h103/usb_dfu/usbdfu.c b/examples/stm32-h103/usb_dfu/usbdfu.c new file mode 100644 index 0000000..9e72318 --- /dev/null +++ b/examples/stm32-h103/usb_dfu/usbdfu.c @@ -0,0 +1,298 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Gareth McMullin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include + +#include + +#include "dfu.h" + +#define APP_ADDRESS 0x08002000 + +/* Commands sent with wBlockNum == 0 as per ST implementation. */ +#define CMD_SETADDR 0x21 +#define CMD_ERASE 0x41 + +/* We need a special large control buffer for this device: */ +u8 usbd_control_buffer[1024]; + +static enum dfu_state usbdfu_state = STATE_DFU_IDLE; + +static struct { + u8 buf[sizeof(usbd_control_buffer)]; + u16 len; + u32 addr; + u16 blocknum; +} prog; + +const struct usb_device_descriptor dev = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .bMaxPacketSize0 = 64, + .idVendor = 0x0483, + .idProduct = 0xDF11, + .bcdDevice = 0x0200, + .iManufacturer = 1, + .iProduct = 2, + .iSerialNumber = 3, + .bNumConfigurations = 1, +}; + +const struct usb_dfu_descriptor dfu_function = { + .bLength = sizeof(struct usb_dfu_descriptor), + .bDescriptorType = DFU_FUNCTIONAL, + .bmAttributes = USB_DFU_CAN_DOWNLOAD | USB_DFU_WILL_DETACH, + .wDetachTimeout = 255, + .wTransferSize = 1024, + .bcdDFUVersion = 0x011A, +}; + +const struct usb_interface_descriptor iface = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = 0xFE, /* Device Firmware Upgrade */ + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 2, + + /* The ST Microelectronics DfuSe application needs this string. + * The format isn't documented... */ + .iInterface = 4, + + .extra = &dfu_function, + .extralen = sizeof(dfu_function), +}; + +const struct usb_interface ifaces[] = {{ + .num_altsetting = 1, + .altsetting = &iface, +}}; + +const struct usb_config_descriptor config = { + .bLength = USB_DT_CONFIGURATION_SIZE, + .bDescriptorType = USB_DT_CONFIGURATION, + .wTotalLength = 0, + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = 0xC0, + .bMaxPower = 0x32, + + .interface = ifaces, +}; + +static const char *usb_strings[] = { + "x", + "Black Sphere Technologies", + "DFU Demo", + "DEMO", + /* This string is used by ST Microelectronics' DfuSe utility */ + "@Internal Flash /0x08000000/8*001Ka,56*001Kg" +}; + +static u8 usbdfu_getstatus(u32 *bwPollTimeout) +{ + switch(usbdfu_state) { + case STATE_DFU_DNLOAD_SYNC: + usbdfu_state = STATE_DFU_DNBUSY; + *bwPollTimeout = 100; + return DFU_STATUS_OK; + + case STATE_DFU_MANIFEST_SYNC: + /* Device will reset when read is complete */ + usbdfu_state = STATE_DFU_MANIFEST; + return DFU_STATUS_OK; + + default: + return DFU_STATUS_OK; + } +} + +static void usbdfu_getstatus_complete(struct usb_setup_data *req) +{ + int i; + (void)req; + + switch(usbdfu_state) { + case STATE_DFU_DNBUSY: + + flash_unlock(); + if(prog.blocknum == 0) { + switch(prog.buf[0]) { + case CMD_ERASE: + flash_erase_page(*(u32*)(prog.buf+1)); + case CMD_SETADDR: + prog.addr = *(u32*)(prog.buf+1); + } + } else { + u32 baseaddr = prog.addr + + ((prog.blocknum - 2) * + dfu_function.wTransferSize); + for(i = 0; i < prog.len; i += 2) + flash_program_half_word(baseaddr + i, + *(u16*)(prog.buf+i)); + } + flash_lock(); + + /* We jump straight to dfuDNLOAD-IDLE, + * skipping dfuDNLOAD-SYNC + */ + usbdfu_state = STATE_DFU_DNLOAD_IDLE; + return; + + case STATE_DFU_MANIFEST: + /* USB device must detach, we just reset... */ + scb_reset_system(); + return; /* Will never return */ + default: + return; + } +} + +static int usbdfu_control_command(struct usb_setup_data *req, + void (**complete)(struct usb_setup_data *req)) +{ + (void)complete; + + if(req->bmRequestType != 0x21) + return 0; /* Only accept class request */ + + switch(req->bRequest) { + case DFU_DNLOAD: + usbdfu_state = STATE_DFU_MANIFEST_SYNC; + return 1; + case DFU_CLRSTATUS: + /* Clear error and return to dfuIDLE */ + if(usbdfu_state == STATE_DFU_ERROR) + usbdfu_state = STATE_DFU_IDLE; + return 1; + case DFU_ABORT: + /* Abort returns to dfuIDLE state */ + usbdfu_state = STATE_DFU_IDLE; + return 1; + } + + return 0; +} + +static int usbdfu_control_read(struct usb_setup_data *req, u8 **buf, u16 *len, + void (**complete)(struct usb_setup_data *req)) +{ + + if(req->bmRequestType != 0xA1) + return 0; /* Only accept class request */ + + switch(req->bRequest) { + case DFU_UPLOAD: + /* Upload not supported for now */ + return 0; + case DFU_GETSTATUS: { + u32 bwPollTimeout = 0; /* 24-bit integer in DFU class spec */ + + (*buf)[0] = usbdfu_getstatus(&bwPollTimeout); + (*buf)[1] = bwPollTimeout & 0xFF; + (*buf)[2] = (bwPollTimeout >> 8) & 0xFF; + (*buf)[3] = (bwPollTimeout >> 16) & 0xFF; + (*buf)[4] = usbdfu_state; + (*buf)[5] = 0; /* iString not used here */ + *len = 6; + + *complete = usbdfu_getstatus_complete; + + return 1; + } + case DFU_GETSTATE: + /* Return state with no state transision */ + *buf[0] = usbdfu_state; + *len = 1; + return 1; + } + + return 0; +} + +static int usbdfu_control_write(struct usb_setup_data *req, u8 *buf, u16 len, + void (**complete)(struct usb_setup_data *req)) +{ + (void)complete; + + if(req->bmRequestType != 0x21) + return 0; /* Only accept class request */ + + if(req->bRequest != DFU_DNLOAD) + return 0; + + /* Copy download data for use on GET_STATUS */ + prog.blocknum = req->wValue; + prog.len = len; + memcpy(prog.buf, buf, len); + usbdfu_state = STATE_DFU_DNLOAD_SYNC; + + return 1; +} + +int main(void) +{ + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN); + if(!gpio_get(GPIOA, GPIO10)) { + /* Boot the application if it's valid */ + if((*(volatile u32*)APP_ADDRESS & 0x2FFE0000) == 0x20000000) { + /* Set vector table base address */ + SCB_VTOR = APP_ADDRESS & 0xFFFF; + /* Initialise master stack pointer */ + asm volatile ("msr msp, %0"::"g" + (*(volatile u32*)APP_ADDRESS)); + /* Jump to application */ + (*(void(**)())(APP_ADDRESS + 4))(); + } + } + + rcc_clock_setup_in_hsi_out_48mhz(); + + rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USBEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN); + + AFIO_MAPR |= AFIO_MAPR_SWJ_CFG_JTAG_OFF_SW_ON; + gpio_set_mode(GPIOA, GPIO_MODE_INPUT, 0, GPIO15); + + usbd_init(&dev, &config, usb_strings); + usbd_set_control_buffer_size(sizeof(usbd_control_buffer)); + usbd_register_control_command_callback(usbdfu_control_command); + usbd_register_control_write_callback(usbdfu_control_write); + usbd_register_control_read_callback(usbdfu_control_read); + + gpio_set(GPIOA, GPIO15); + gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ, + GPIO_CNF_OUTPUT_PUSHPULL, GPIO15); + + while (1) + usbd_poll(); +} + diff --git a/examples/stm32-h103/usb_dfu/usbdfu.ld b/examples/stm32-h103/usb_dfu/usbdfu.ld new file mode 100644 index 0000000..d7cd0c5 --- /dev/null +++ b/examples/stm32-h103/usb_dfu/usbdfu.ld @@ -0,0 +1,29 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Thomas Otto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Define memory regions. */ +MEMORY +{ + rom (rx) : ORIGIN = 0x08000000, LENGTH =8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 4K +} + +/* Include the common ld script from libopenstm32. */ +INCLUDE libopenstm32.ld + diff --git a/examples/stm32-h103/usb_hid/Makefile b/examples/stm32-h103/usb_hid/Makefile new file mode 100644 index 0000000..f280cfb --- /dev/null +++ b/examples/stm32-h103/usb_hid/Makefile @@ -0,0 +1,98 @@ +## +## This file is part of the libopenstm32 project. +## +## Copyright (C) 2009 Uwe Hermann +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 3 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see . +## + +BINARY = usbhid + +PREFIX=/opt/paparazzi/stm32/bin/arm-none-eabi +# PREFIX ?= arm-none-eabi +#PREFIX ?= arm-elf +CC = $(PREFIX)-gcc +LD = $(PREFIX)-gcc +OBJCOPY = $(PREFIX)-objcopy +OBJDUMP = $(PREFIX)-objdump +# Uncomment this line if you want to use the installed (not local) library. +#TOOLCHAIN_DIR = `dirname \`which $(CC)\``/.. +TOOLCHAIN_DIR = ../../.. +CFLAGS = -O0 -g -Wall -Wextra -I$(TOOLCHAIN_DIR)/include -fno-common \ + -mcpu=cortex-m3 -mthumb +LDSCRIPT = $(BINARY).ld +LDFLAGS = -L$(TOOLCHAIN_DIR)/lib -T$(LDSCRIPT) -nostartfiles +OBJS = $(BINARY).o + +#OPENOCD_BASE = /usr +OPENOCD_BASE = /opt/paparazzi/stm32 +OPENOCD = $(OPENOCD_BASE)/bin/openocd +OPENOCD_SCRIPTS = $(OPENOCD_BASE)/share/openocd/scripts +#OPENOCD_FLASHER = $(OPENOCD_SCRIPTS)/interface/openocd-usb.cfg +OPENOCD_FLASHER = $(OPENOCD_SCRIPTS)/interface/jtagkey-tiny.cfg +OPENOCD_BOARD = $(OPENOCD_SCRIPTS)/board/olimex_stm32_h103.cfg + +# Be silent per default, but 'make V=1' will show all compiler calls. +ifneq ($(V),1) +Q := @ +NULL := 2>/dev/null +endif + +all: images + +images: $(BINARY) + @printf " OBJCOPY $(BINARY).bin\n" + $(Q)$(OBJCOPY) -Obinary $(BINARY) $(BINARY).bin + @printf " OBJCOPY $(BINARY).hex\n" + $(Q)$(OBJCOPY) -Oihex $(BINARY) $(BINARY).hex + @printf " OBJCOPY $(BINARY).srec\n" + $(Q)$(OBJCOPY) -Osrec $(BINARY) $(BINARY).srec + @printf " OBJDUMP $(BINARY).list\n" + $(Q)$(OBJDUMP) -S $(BINARY) > $(BINARY).list + +$(BINARY): $(OBJS) $(LDSCRIPT) + @printf " LD $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS) -lopenstm32 + +%.o: %.c Makefile + @printf " CC $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(CC) $(CFLAGS) -o $@ -c $< + +clean: + @printf " CLEAN $(subst $(shell pwd)/,,$(OBJS))\n" + $(Q)rm -f *.o + @printf " CLEAN $(BINARY)\n" + $(Q)rm -f $(BINARY) + @printf " CLEAN $(BINARY).bin\n" + $(Q)rm -f $(BINARY).bin + @printf " CLEAN $(BINARY).hex\n" + $(Q)rm -f $(BINARY).hex + @printf " CLEAN $(BINARY).srec\n" + $(Q)rm -f $(BINARY).srec + @printf " CLEAN $(BINARY).list\n" + $(Q)rm -f $(BINARY).list + +flash: images + @printf " FLASH $(BINARY).bin\n" + @# IMPORTANT: Don't use "resume", only "reset" will work correctly! + $(Q)$(OPENOCD) -s $(OPENOCD_SCRIPTS) \ + -f $(OPENOCD_FLASHER) \ + -f $(OPENOCD_BOARD) \ + -c "init" -c "reset halt" \ + -c "flash write_image erase $(BINARY).hex" \ + -c "reset" \ + -c "shutdown" $(NULL) + +.PHONY: images clean + diff --git a/examples/stm32-h103/usb_hid/README b/examples/stm32-h103/usb_hid/README new file mode 100644 index 0000000..3ba2aa6 --- /dev/null +++ b/examples/stm32-h103/usb_hid/README @@ -0,0 +1,43 @@ +------------------------------------------------------------------------------ +README +------------------------------------------------------------------------------ + +This example implements a USB Human Interface Device (HID) +to demonstrate the use of the USB device stack. + +Building +-------- + + $ make + +Running 'make' on the top-level libopenstm32 directory will automatically +also build this example. Or you can build the library "manually" and +then run 'make' in this directory. + +You may want to override the toolchain (e.g., arm-elf or arm-none-eabi): + + $ PREFIX=arm-none-eabi make + +For a more verbose build you can use + + $ make V=1 + + +Flashing +-------- + +You can flash the generated code using OpenOCD: + + $ make flash + +Or you can do the same manually via: + + $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg + $ telnet localhost 4444 + > reset halt + > flash write_image erase systick.hex + > reset + +Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or +replace "stm.cfg" with your respective config file. + diff --git a/examples/stm32-h103/usb_hid/hid.h b/examples/stm32-h103/usb_hid/hid.h new file mode 100644 index 0000000..4690103 --- /dev/null +++ b/examples/stm32-h103/usb_hid/hid.h @@ -0,0 +1,38 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Gareth McMullin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef __HID_H +#define __HID_H + +#include + +#define USB_CLASS_HID 3 + +#define USB_DT_HID 0x21 +#define USB_DT_REPORT 0x22 + +struct usb_hid_descriptor { + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t bcdHID; + uint8_t bCountryCode; + uint8_t bNumDescriptors; +} __attribute__((packed)); + +#endif + diff --git a/examples/stm32-h103/usb_hid/usbhid.c b/examples/stm32-h103/usb_hid/usbhid.c new file mode 100644 index 0000000..b7a72ec --- /dev/null +++ b/examples/stm32-h103/usb_hid/usbhid.c @@ -0,0 +1,267 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Gareth McMullin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include + +#include + +#include "hid.h" + +/* Define this to include the DFU APP interface. */ +#define INCLUDE_DFU_INTERFACE + +#ifdef INCLUDE_DFU_INTERFACE +# include +# include "../usb_dfu/dfu.h" +#endif + +const struct usb_device_descriptor dev = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .bMaxPacketSize0 = 64, + .idVendor = 0x0483, + .idProduct = 0x5710, + .bcdDevice = 0x0200, + .iManufacturer = 1, + .iProduct = 2, + .iSerialNumber = 3, + .bNumConfigurations = 1, +}; + +/* I have no idea what this means. I haven't read the HID spec. */ +static const u8 hid_report_descriptor[] = { + 0x05, 0x01, 0x09, 0x02, 0xA1, 0x01, 0x09, 0x01, + 0xA1, 0x00, 0x05, 0x09, 0x19, 0x01, 0x29, 0x03, + 0x15, 0x00, 0x25, 0x01, 0x95, 0x03, 0x75, 0x01, + 0x81, 0x02, 0x95, 0x01, 0x75, 0x05, 0x81, 0x01, + 0x05, 0x01, 0x09, 0x30, 0x09, 0x31, 0x09, 0x38, + 0x15, 0x81, 0x25, 0x7F, 0x75, 0x08, 0x95, 0x03, + 0x81, 0x06, 0xC0, 0x09, 0x3c, 0x05, 0xff, 0x09, + 0x01, 0x15, 0x00, 0x25, 0x01, 0x75, 0x01, 0x95, + 0x02, 0xb1, 0x22, 0x75, 0x06, 0x95, 0x01, 0xb1, + 0x01, 0xc0 +}; + +static const struct { + struct usb_hid_descriptor hid_descriptor; + struct { + uint8_t bReportDescriptorType; + uint16_t wDescriptorLength; + } __attribute__((packed)) hid_report; +} __attribute__((packed)) hid_function = { + .hid_descriptor = { + .bLength = sizeof(hid_function), + .bDescriptorType = USB_DT_HID, + .bcdHID = 0x0100, + .bCountryCode = 0, + .bNumDescriptors = 1, + }, + .hid_report = { + .bReportDescriptorType = USB_DT_REPORT, + .wDescriptorLength = sizeof(hid_report_descriptor), + } +}; + +const struct usb_endpoint_descriptor hid_endpoint = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x81, + .bmAttributes = USB_ENDPOINT_ATTR_INTERRUPT, + .wMaxPacketSize = 4, + .bInterval = 0x20, +}; + +const struct usb_interface_descriptor hid_iface = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_HID, + .bInterfaceSubClass = 1, /* boot */ + .bInterfaceProtocol = 2, /* mouse */ + .iInterface = 0, + + .endpoint = &hid_endpoint, + + .extra = &hid_function, + .extralen = sizeof(hid_function), +}; + +#ifdef INCLUDE_DFU_INTERFACE +const struct usb_dfu_descriptor dfu_function = { + .bLength = sizeof(struct usb_dfu_descriptor), + .bDescriptorType = DFU_FUNCTIONAL, + .bmAttributes = USB_DFU_CAN_DOWNLOAD | USB_DFU_WILL_DETACH, + .wDetachTimeout = 255, + .wTransferSize = 1024, + .bcdDFUVersion = 0x011A, +}; + +const struct usb_interface_descriptor dfu_iface = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 1, + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = 0xFE, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 1, + .iInterface = 0, + + .extra = &dfu_function, + .extralen = sizeof(dfu_function), +}; +#endif + +const struct usb_interface ifaces[] = {{ + .num_altsetting = 1, + .altsetting = &hid_iface, +#ifdef INCLUDE_DFU_INTERFACE +}, { + .num_altsetting = 1, + .altsetting = &dfu_iface, +#endif +}}; + +const struct usb_config_descriptor config = { + .bLength = USB_DT_CONFIGURATION_SIZE, + .bDescriptorType = USB_DT_CONFIGURATION, + .wTotalLength = 0, +#ifdef INCLUDE_DFU_INTERFACE + .bNumInterfaces = 2, +#else + .bNumInterfaces = 1, +#endif + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = 0xC0, + .bMaxPower = 0x32, + + .interface = ifaces, +}; + +static const char *usb_strings[] = { + "x", + "Black Sphere Technologies", + "HID Demo", + "DEMO", +}; + +static int hid_control_read(struct usb_setup_data *req, u8 **buf, u16 *len, + void (**complete)(struct usb_setup_data *req)) +{ + (void)complete; + + if((req->bmRequestType != 0x81) || + (req->bRequest != USB_REQ_GET_DESCRIPTOR) || + (req->wValue != 0x2200)) + return 0; + + /* Handle the HID report descriptor */ + *buf = (u8*)hid_report_descriptor; + *len = sizeof(hid_report_descriptor); + + return 1; +} + +#ifdef INCLUDE_DFU_INTERFACE +static void dfu_detach_complete(struct usb_setup_data *req) +{ + (void)req; + + gpio_set_mode(GPIOA, GPIO_MODE_INPUT, 0, GPIO15); + gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ, + GPIO_CNF_OUTPUT_PUSHPULL, GPIO10); + gpio_set(GPIOA, GPIO10); + scb_reset_core(); +} + +static int dfu_control_command(struct usb_setup_data *req, + void (**complete)(struct usb_setup_data *req)) +{ + if((req->bmRequestType != 0x21) || (req->bRequest != DFU_DETACH)) + return 0; /* Only accept class request */ + + *complete = dfu_detach_complete; + + return 1; +} +#endif + +static void hid_set_config(u16 wValue) +{ + (void)wValue; + + usbd_ep_setup(0x81, USB_ENDPOINT_ATTR_INTERRUPT, 4, NULL); + + usbd_register_control_read_callback(hid_control_read); +#ifdef INCLUDE_DFU_INTERFACE + usbd_register_control_command_callback(dfu_control_command); +#endif + + systick_set_clocksource(STK_CTRL_CLKSOURCE_AHB_DIV8); + systick_set_reload(100000); + systick_interrupt_enable(); + systick_counter_enable(); +} + +int main(void) +{ + rcc_clock_setup_in_hsi_out_48mhz(); + + + rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USBEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN); + + gpio_set(GPIOC, GPIO11); + gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_2_MHZ, + GPIO_CNF_OUTPUT_PUSHPULL, GPIO11); + + usbd_init(&dev, &config, usb_strings); + usbd_register_set_config_callback(hid_set_config); + + {int i; for (i=0;i<0x80000;i++);} + gpio_clear(GPIOC, GPIO11); + + while (1) + usbd_poll(); +} + +void sys_tick_handler(void) +{ + static int x = 0; + static int dir = 1; + uint8_t buf[4] = {0, 0, 0, 0}; + + buf[1] = dir; + x += dir; + if(x > 30) dir = -dir; + if(x < -30) dir = -dir; + + usbd_ep_write_packet(0x81, buf, 4); +} + diff --git a/examples/stm32-h103/usb_hid/usbhid.ld b/examples/stm32-h103/usb_hid/usbhid.ld new file mode 100644 index 0000000..a393e0b --- /dev/null +++ b/examples/stm32-h103/usb_hid/usbhid.ld @@ -0,0 +1,32 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Thomas Otto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Linker script for Olimex STM32-H103 (STM32F103RBT6, 128K flash, 20K RAM). */ + +/* Define memory regions. */ +MEMORY +{ + rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K +} + + +/* Include the common ld script from libopenstm32. */ +INCLUDE libopenstm32.ld + diff --git a/examples/stm32-h103/usb_iap/Makefile b/examples/stm32-h103/usb_iap/Makefile new file mode 100644 index 0000000..195e5da --- /dev/null +++ b/examples/stm32-h103/usb_iap/Makefile @@ -0,0 +1,98 @@ +## +## This file is part of the libopenstm32 project. +## +## Copyright (C) 2009 Uwe Hermann +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 3 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see . +## + +BINARY = usbiap + +PREFIX=/opt/paparazzi/stm32/bin/arm-none-eabi +# PREFIX ?= arm-none-eabi +#PREFIX ?= arm-elf +CC = $(PREFIX)-gcc +LD = $(PREFIX)-gcc +OBJCOPY = $(PREFIX)-objcopy +OBJDUMP = $(PREFIX)-objdump +# Uncomment this line if you want to use the installed (not local) library. +#TOOLCHAIN_DIR = `dirname \`which $(CC)\``/.. +TOOLCHAIN_DIR = ../../.. +CFLAGS = -O0 -g -Wall -Wextra -I$(TOOLCHAIN_DIR)/include -fno-common \ + -mcpu=cortex-m3 -mthumb +LDSCRIPT = $(BINARY).ld +LDFLAGS = -L$(TOOLCHAIN_DIR)/lib -T$(LDSCRIPT) -nostartfiles +OBJS = $(BINARY).o + +#OPENOCD_BASE = /usr +OPENOCD_BASE = /opt/paparazzi/stm32 +OPENOCD = $(OPENOCD_BASE)/bin/openocd +OPENOCD_SCRIPTS = $(OPENOCD_BASE)/share/openocd/scripts +#OPENOCD_FLASHER = $(OPENOCD_SCRIPTS)/interface/openocd-usb.cfg +OPENOCD_FLASHER = $(OPENOCD_SCRIPTS)/interface/jtagkey-tiny.cfg +OPENOCD_BOARD = $(OPENOCD_SCRIPTS)/board/olimex_stm32_h103.cfg + +# Be silent per default, but 'make V=1' will show all compiler calls. +ifneq ($(V),1) +Q := @ +NULL := 2>/dev/null +endif + +all: images + +images: $(BINARY) + @printf " OBJCOPY $(BINARY).bin\n" + $(Q)$(OBJCOPY) -Obinary $(BINARY) $(BINARY).bin + @printf " OBJCOPY $(BINARY).hex\n" + $(Q)$(OBJCOPY) -Oihex $(BINARY) $(BINARY).hex + @printf " OBJCOPY $(BINARY).srec\n" + $(Q)$(OBJCOPY) -Osrec $(BINARY) $(BINARY).srec + @printf " OBJDUMP $(BINARY).list\n" + $(Q)$(OBJDUMP) -S $(BINARY) > $(BINARY).list + +$(BINARY): $(OBJS) $(LDSCRIPT) + @printf " LD $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS) -lopenstm32 + +%.o: %.c Makefile + @printf " CC $(subst $(shell pwd)/,,$(@))\n" + $(Q)$(CC) $(CFLAGS) -o $@ -c $< + +clean: + @printf " CLEAN $(subst $(shell pwd)/,,$(OBJS))\n" + $(Q)rm -f *.o + @printf " CLEAN $(BINARY)\n" + $(Q)rm -f $(BINARY) + @printf " CLEAN $(BINARY).bin\n" + $(Q)rm -f $(BINARY).bin + @printf " CLEAN $(BINARY).hex\n" + $(Q)rm -f $(BINARY).hex + @printf " CLEAN $(BINARY).srec\n" + $(Q)rm -f $(BINARY).srec + @printf " CLEAN $(BINARY).list\n" + $(Q)rm -f $(BINARY).list + +flash: images + @printf " FLASH $(BINARY).bin\n" + @# IMPORTANT: Don't use "resume", only "reset" will work correctly! + $(Q)$(OPENOCD) -s $(OPENOCD_SCRIPTS) \ + -f $(OPENOCD_FLASHER) \ + -f $(OPENOCD_BOARD) \ + -c "init" -c "reset halt" \ + -c "flash write_image erase $(BINARY).hex" \ + -c "reset" \ + -c "shutdown" $(NULL) + +.PHONY: images clean + diff --git a/examples/stm32-h103/usb_iap/README b/examples/stm32-h103/usb_iap/README new file mode 100644 index 0000000..c4b41ed --- /dev/null +++ b/examples/stm32-h103/usb_iap/README @@ -0,0 +1,42 @@ +------------------------------------------------------------------------------ +README +------------------------------------------------------------------------------ + +This example implements a USB bootloader for the Paparazzi project. + +Building +-------- + + $ make + +Running 'make' on the top-level libopenstm32 directory will automatically +also build this example. Or you can build the library "manually" and +then run 'make' in this directory. + +You may want to override the toolchain (e.g., arm-elf or arm-none-eabi): + + $ PREFIX=arm-none-eabi make + +For a more verbose build you can use + + $ make V=1 + + +Flashing +-------- + +You can flash the generated code using OpenOCD: + + $ make flash + +Or you can do the same manually via: + + $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg + $ telnet localhost 4444 + > reset halt + > flash write_image erase usbiap.hex + > reset + +Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or +replace "stm.cfg" with your respective config file. + diff --git a/examples/stm32-h103/usb_iap/usbiap.c b/examples/stm32-h103/usb_iap/usbiap.c new file mode 100644 index 0000000..9e72318 --- /dev/null +++ b/examples/stm32-h103/usb_iap/usbiap.c @@ -0,0 +1,298 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Gareth McMullin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include + +#include + +#include "dfu.h" + +#define APP_ADDRESS 0x08002000 + +/* Commands sent with wBlockNum == 0 as per ST implementation. */ +#define CMD_SETADDR 0x21 +#define CMD_ERASE 0x41 + +/* We need a special large control buffer for this device: */ +u8 usbd_control_buffer[1024]; + +static enum dfu_state usbdfu_state = STATE_DFU_IDLE; + +static struct { + u8 buf[sizeof(usbd_control_buffer)]; + u16 len; + u32 addr; + u16 blocknum; +} prog; + +const struct usb_device_descriptor dev = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .bMaxPacketSize0 = 64, + .idVendor = 0x0483, + .idProduct = 0xDF11, + .bcdDevice = 0x0200, + .iManufacturer = 1, + .iProduct = 2, + .iSerialNumber = 3, + .bNumConfigurations = 1, +}; + +const struct usb_dfu_descriptor dfu_function = { + .bLength = sizeof(struct usb_dfu_descriptor), + .bDescriptorType = DFU_FUNCTIONAL, + .bmAttributes = USB_DFU_CAN_DOWNLOAD | USB_DFU_WILL_DETACH, + .wDetachTimeout = 255, + .wTransferSize = 1024, + .bcdDFUVersion = 0x011A, +}; + +const struct usb_interface_descriptor iface = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = 0xFE, /* Device Firmware Upgrade */ + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 2, + + /* The ST Microelectronics DfuSe application needs this string. + * The format isn't documented... */ + .iInterface = 4, + + .extra = &dfu_function, + .extralen = sizeof(dfu_function), +}; + +const struct usb_interface ifaces[] = {{ + .num_altsetting = 1, + .altsetting = &iface, +}}; + +const struct usb_config_descriptor config = { + .bLength = USB_DT_CONFIGURATION_SIZE, + .bDescriptorType = USB_DT_CONFIGURATION, + .wTotalLength = 0, + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = 0xC0, + .bMaxPower = 0x32, + + .interface = ifaces, +}; + +static const char *usb_strings[] = { + "x", + "Black Sphere Technologies", + "DFU Demo", + "DEMO", + /* This string is used by ST Microelectronics' DfuSe utility */ + "@Internal Flash /0x08000000/8*001Ka,56*001Kg" +}; + +static u8 usbdfu_getstatus(u32 *bwPollTimeout) +{ + switch(usbdfu_state) { + case STATE_DFU_DNLOAD_SYNC: + usbdfu_state = STATE_DFU_DNBUSY; + *bwPollTimeout = 100; + return DFU_STATUS_OK; + + case STATE_DFU_MANIFEST_SYNC: + /* Device will reset when read is complete */ + usbdfu_state = STATE_DFU_MANIFEST; + return DFU_STATUS_OK; + + default: + return DFU_STATUS_OK; + } +} + +static void usbdfu_getstatus_complete(struct usb_setup_data *req) +{ + int i; + (void)req; + + switch(usbdfu_state) { + case STATE_DFU_DNBUSY: + + flash_unlock(); + if(prog.blocknum == 0) { + switch(prog.buf[0]) { + case CMD_ERASE: + flash_erase_page(*(u32*)(prog.buf+1)); + case CMD_SETADDR: + prog.addr = *(u32*)(prog.buf+1); + } + } else { + u32 baseaddr = prog.addr + + ((prog.blocknum - 2) * + dfu_function.wTransferSize); + for(i = 0; i < prog.len; i += 2) + flash_program_half_word(baseaddr + i, + *(u16*)(prog.buf+i)); + } + flash_lock(); + + /* We jump straight to dfuDNLOAD-IDLE, + * skipping dfuDNLOAD-SYNC + */ + usbdfu_state = STATE_DFU_DNLOAD_IDLE; + return; + + case STATE_DFU_MANIFEST: + /* USB device must detach, we just reset... */ + scb_reset_system(); + return; /* Will never return */ + default: + return; + } +} + +static int usbdfu_control_command(struct usb_setup_data *req, + void (**complete)(struct usb_setup_data *req)) +{ + (void)complete; + + if(req->bmRequestType != 0x21) + return 0; /* Only accept class request */ + + switch(req->bRequest) { + case DFU_DNLOAD: + usbdfu_state = STATE_DFU_MANIFEST_SYNC; + return 1; + case DFU_CLRSTATUS: + /* Clear error and return to dfuIDLE */ + if(usbdfu_state == STATE_DFU_ERROR) + usbdfu_state = STATE_DFU_IDLE; + return 1; + case DFU_ABORT: + /* Abort returns to dfuIDLE state */ + usbdfu_state = STATE_DFU_IDLE; + return 1; + } + + return 0; +} + +static int usbdfu_control_read(struct usb_setup_data *req, u8 **buf, u16 *len, + void (**complete)(struct usb_setup_data *req)) +{ + + if(req->bmRequestType != 0xA1) + return 0; /* Only accept class request */ + + switch(req->bRequest) { + case DFU_UPLOAD: + /* Upload not supported for now */ + return 0; + case DFU_GETSTATUS: { + u32 bwPollTimeout = 0; /* 24-bit integer in DFU class spec */ + + (*buf)[0] = usbdfu_getstatus(&bwPollTimeout); + (*buf)[1] = bwPollTimeout & 0xFF; + (*buf)[2] = (bwPollTimeout >> 8) & 0xFF; + (*buf)[3] = (bwPollTimeout >> 16) & 0xFF; + (*buf)[4] = usbdfu_state; + (*buf)[5] = 0; /* iString not used here */ + *len = 6; + + *complete = usbdfu_getstatus_complete; + + return 1; + } + case DFU_GETSTATE: + /* Return state with no state transision */ + *buf[0] = usbdfu_state; + *len = 1; + return 1; + } + + return 0; +} + +static int usbdfu_control_write(struct usb_setup_data *req, u8 *buf, u16 len, + void (**complete)(struct usb_setup_data *req)) +{ + (void)complete; + + if(req->bmRequestType != 0x21) + return 0; /* Only accept class request */ + + if(req->bRequest != DFU_DNLOAD) + return 0; + + /* Copy download data for use on GET_STATUS */ + prog.blocknum = req->wValue; + prog.len = len; + memcpy(prog.buf, buf, len); + usbdfu_state = STATE_DFU_DNLOAD_SYNC; + + return 1; +} + +int main(void) +{ + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN); + if(!gpio_get(GPIOA, GPIO10)) { + /* Boot the application if it's valid */ + if((*(volatile u32*)APP_ADDRESS & 0x2FFE0000) == 0x20000000) { + /* Set vector table base address */ + SCB_VTOR = APP_ADDRESS & 0xFFFF; + /* Initialise master stack pointer */ + asm volatile ("msr msp, %0"::"g" + (*(volatile u32*)APP_ADDRESS)); + /* Jump to application */ + (*(void(**)())(APP_ADDRESS + 4))(); + } + } + + rcc_clock_setup_in_hsi_out_48mhz(); + + rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USBEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN); + rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN); + + AFIO_MAPR |= AFIO_MAPR_SWJ_CFG_JTAG_OFF_SW_ON; + gpio_set_mode(GPIOA, GPIO_MODE_INPUT, 0, GPIO15); + + usbd_init(&dev, &config, usb_strings); + usbd_set_control_buffer_size(sizeof(usbd_control_buffer)); + usbd_register_control_command_callback(usbdfu_control_command); + usbd_register_control_write_callback(usbdfu_control_write); + usbd_register_control_read_callback(usbdfu_control_read); + + gpio_set(GPIOA, GPIO15); + gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ, + GPIO_CNF_OUTPUT_PUSHPULL, GPIO15); + + while (1) + usbd_poll(); +} + diff --git a/examples/stm32-h103/usb_iap/usbiap.ld b/examples/stm32-h103/usb_iap/usbiap.ld new file mode 100644 index 0000000..a393e0b --- /dev/null +++ b/examples/stm32-h103/usb_iap/usbiap.ld @@ -0,0 +1,32 @@ +/* + * This file is part of the libopenstm32 project. + * + * Copyright (C) 2010 Thomas Otto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Linker script for Olimex STM32-H103 (STM32F103RBT6, 128K flash, 20K RAM). */ + +/* Define memory regions. */ +MEMORY +{ + rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K +} + + +/* Include the common ld script from libopenstm32. */ +INCLUDE libopenstm32.ld + -- cgit v1.2.3