aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-18Merge pull request #88 "Fix logical operator error in tim_ic_set_input ↵Piotr Esden-Tempski
reported by hmjack2008" Merge remote-tracking branch 'ksarkies/timer'
2013-02-18Merge pull request #92 "DMA tidyup"Piotr Esden-Tempski
Merge remote-tracking branch 'karlp/dma_tidy'
2013-02-18Adjusted code for l1 to the new api introduced by karlp in pr #84Piotr Esden-Tempski
2013-02-18Merge pull request #85 "Add notes on build prerequisites"Piotr Esden-Tempski
Merge remote-tracking branch 'karlp/pr_prereq_docs'
2013-02-18Merge pull request #84 "Pr flash reg rename"Piotr Esden-Tempski
Merge remote-tracking branch 'karlp/pr_flash-reg-rename' Conflicts: include/libopencm3/stm32/l1/flash.h
2013-02-18Merge pull request #81 "[examples f1] ADC+DAC very basic example"Piotr Esden-Tempski
Merge remote-tracking branch 'karlp/pr_f1_adc_dac'
2013-02-18Merge pull request #79 "More L1 support (and f2/f4 rtc)"Piotr Esden-Tempski
Merge remote-tracking branch 'karlp/pr_more_l1_rtc'
2013-02-18Merging pull request #78 "Remove assembly forcing stack."Piotr Esden-Tempski
Merge remote-tracking branch 'karlp/destroy-all-the-asm'
2013-02-18Merging pull request #76 "LM4F clock api"Piotr Esden-Tempski
Merge remote-tracking branch 'mrnuke/lm4f_clock_api'
2013-02-15Fixes #93 copypasta error in RCC_CSR_BORRSTF definition.Piotr Esden-Tempski
2013-02-06[stm32] Use common memorymap include for consistencyKarl Palsson
Most peripheral headers simply include <libopencm3/stm32/memorymap.h> which, like the rest of libopencm3 requires the correct compiler define flag to be set. A few peripherals were directly including the platform include, libopencm3/stm32/xx/memorymap.h, and in some of those cases it wasn't even correctly including the correct platform. (Likely the result of copy/paste errors) These direct includes have been eliminated
2013-02-06[stm32-dma] Eliminate redundant write.Karl Palsson
Clearing a single bit in DMA_CCR, then immediately writing a 0 over the entire register is completely redundant on the F1, F3 and L1 DMA peripherals. (Unlike the F2 & F4 DMA Peripheral, where this is required)
2013-02-01Fix logical operator error in tim_ic_set_input reported by hmjack2008Ken Sarkies
2013-01-29Fixing gpio_set_af now really...Piotr Esden-Tempski
2013-01-29Fix gpio_set_af register usage.Piotr Esden-Tempski
2013-01-29Added IRQ USART example for the f4 discovery board.Piotr Esden-Tempski
2013-01-23Add notes on build prerequisitesKarl Palsson
2013-01-23[flash] f4: use "proper" bit definition naming.Karl Palsson
Part 4 of 4: updated f4 to use flash_<reg>_bit instead of just flash_bit
2013-01-23[flash] f2: use "proper" bit definition naming.Karl Palsson
Part 3 of 4: updated f2 to use flash_<reg>_bit instead of just flash_bit
2013-01-23[flash] f1: use "proper" bit definition naming.Karl Palsson
Part 2 of 4: updated f1 to use flash_<reg>_bit instead of just flash_bit
2013-01-23[flash] l1: use "proper" bit definition naming.Karl Palsson
Part 1 of 4: updated l1 to use flash_<reg>_bit instead of just flash_bit
2013-01-23Add examples making use of the RTCKarl Palsson
Add an example using the RTC to help with a lower power design. This is a sister example to the existing "button-irq-printf", which is functionally identical, but uses far less power. There's more tricks that can be done to lower the power even further, but this shows a few of the early steps that can be done, using the RTC wakeup instead of a timer.
2013-01-22[stm32] Support the "new" BCD style RTC peripheralKarl Palsson
Add the register definitions and some of the most basic helper functions for the new style BCD RTC module found on the F2, F4, L1, F3 and F0. This tries to keep as close to HACKING_COMMON_DOC as possible, while maintaining sane names.
2013-01-22[l1] rcc: support MSI clockingKarl Palsson
Some new definitions and helpers. Main change really that the list of preconfigured clock configs is no longer restricted to HSI/PLL
2013-01-22[l1] Update to newest ref man definitionsKarl Palsson
Support for the Medium+ and High density parts, mostly by way of extra irqs and register definitions.
2013-01-22[l1] PWR: fix style for common codeKarl Palsson
Code added for L1 to support the PWR Control block didn't properly follow the HACKING_COMMON_DOC guidelines. The naming was wrong, and some headers were missing. This commit has no functional changes, it only addresses the style and structure problems.
2013-01-22[l1] fix whitespace and missing license infoKarl Palsson
Earlier additions to the L1 support were not correctly using linux coding guidelines as specified in /HACKING. Some examples were also missing license information.
2013-01-22[examples f1] ADC+DAC very basic exampleKarl Palsson
Just shows some basic working examples of using the DAC with the ADC. No special features, but very little hardware required to demonstrate.
2013-01-16Remove assembly forcing stack.Karl Palsson
Fixes #51 There should be no reason for manually trying to load the stack. Cortex devices can be programmed with only C, and any code that needed this would indicate broken vectors.
2013-01-10efm32gg990f1024: added linker scriptchrysn
2013-01-10platform-independent makefile: fix old "stm32" referencechrysn
the "make clean" target showed a constant "stm32/f1" debug message instead of the current relative directory. this is fixed by showing the relevant portion of the current directory instead, relevant being determined by evaluating the current makefile's relative position and stripping that part off.
2013-01-09Merging pull request #72 DocPiotr Esden-Tempski
Merge remote-tracking branch 'ksarkies/doc' Conflicts: doc/stm32f1/Doxyfile doc/stm32f2/Doxyfile doc/stm32f4/Doxyfile lib/stm32/f1/Makefile lib/stm32/f2/Makefile lib/stm32/f4/Makefile
2013-01-09Removed dummy character string from examples due to api change in: 7a5da60Piotr Esden-Tempski
2013-01-09lm4f: Update miniblink example to demonstrate clock APIAlexandru Gagniuc
Flashes the Red, Green and Blue diodes on the board, in order. The system clock starts at 80MHz. Pressing SW2 toggles the system clock between 80MHz, 57MHz, 40MHz ,20MHz, and 16MHz by changing the PLL divisor. Pressing SW1 bypasses the PLL completely, and runs off the raw 16MHz clock provided by the external crystal oscillator. The LEDs will toggle at different speeds, depending on the system clock. The system clock changes are handled within the interrupt service routine. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-01-09lm4f: Make miniblink example more readable, by defining RGB pinsAlexandru Gagniuc
Instead of setting and clearing RGB pins by PINx constants, define more readable constants such as RGB_RED, and RGB_PORT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-01-09lm4f: Add API for controlling the system run clock sourcesAlexandru Gagniuc
Add an abstraction layer to handle the clock control for the run time clock on LM4F (RCC). Sleep and deep-sleep clock configuration is not handled. Complete documentation for the clock control API is included in doxygen-style comments, and is included in [doc]. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Conflicts: lib/lm4f/Makefile
2013-01-09lm4f: Add API for enabling/disabling peripherals clock sourceAlexandru Gagniuc
The enum definitions are specified in the form 31:5 register offset from SYSCTL_BASE for the clock register 4:0 bit offset for the given peripheral The names have the form [clock_type]_[periph_type]_[periph_number] Where clock_type is RCC for run clock SCC for sleep clock DCC for deep-sleep clock Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-01-08Minor cleanup to use dispatch memorymap.hKen Sarkies
2013-01-08CRC moved to common areaKen Sarkies
2013-01-08I2C to common areaKen Sarkies
F2/4 has now I2C3 included
2013-01-08IWDG moved to common areaKen Sarkies
2013-01-08Move usart files to common areaKen Sarkies
Again added to L1 which is similar to F1
2013-01-08Move DAC to common areaKen Sarkies
(Note there are now dummy source files dac.c (and others) that are not compiled but are needed for documentation).
2013-01-08STM32: Moved SPI code into the common area.Ken Sarkies
Updated the documentation so that it appears in all families Also added it to the L1 area, but is untested. An addition to the memorymap allows commonality and a #ifdef added to the spi_common_all code to exclude the case of SPI3 for L1 and F0 as SPI3 doesn't exist in those. An rcc dispatch header was added to remove same code from the spi header.
2013-01-08Move STM32F1 DMA files to respective common directoriesKen Sarkies
This sets the stage for adding DMA to STM32F3xx (when added) and STM32L1xx as the controller appears to be identical in these.
2013-01-08STM32 DMA: replaced F4 header to match that for F2, and move header and ↵Ken Sarkies
source files to common. In the header: - Fix DMA_SxCR_CT: change shift from 18 to 19 For use with the convenience functions: - Added DMA_SxCR_CHSEL generic values - Added DMA_STREAM - generic values - Added dma_if_offset - rather than separating out LISR and HISR - Added masks - Added dma_disable_double_buffer_mode()
2013-01-06Marked some dummy variables in examples as unused, so that the newer GCC ↵Piotr Esden-Tempski
stops complaining.
2013-01-06Fixed compilation of all the examples after merging pull requests...Piotr Esden-Tempski
2013-01-06Merging pull request #74 LM4F initial supportPiotr Esden-Tempski
Merge remote-tracking branch 'mrnuke/lm4f_initial'
2013-01-06Merge pull request #73 RNGPiotr Esden-Tempski
Merge remote-tracking branch 'oojah/master'