aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32f1/stm32-h103/usart/usart.c
diff options
context:
space:
mode:
Diffstat (limited to 'examples/stm32f1/stm32-h103/usart/usart.c')
-rw-r--r--examples/stm32f1/stm32-h103/usart/usart.c119
1 files changed, 0 insertions, 119 deletions
diff --git a/examples/stm32f1/stm32-h103/usart/usart.c b/examples/stm32f1/stm32-h103/usart/usart.c
deleted file mode 100644
index a221acb..0000000
--- a/examples/stm32f1/stm32-h103/usart/usart.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * This file is part of the libopencm3 project.
- *
- * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <libopencm3/stm32/f1/rcc.h>
-#include <libopencm3/stm32/f1/gpio.h>
-#include <libopencm3/stm32/usart.h>
-
-void clock_setup(void)
-{
- rcc_clock_setup_in_hse_8mhz_out_72mhz();
-
- /* Enable GPIOC clock. */
- rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | RCC_APB2ENR_IOPCEN);
-
- /* Enable clocks for GPIO port B (for GPIO_USART3_TX) and USART3. */
- rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_USART1EN);
- rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN | RCC_APB1ENR_USART3EN);
-}
-
-void usart_setup(void)
-{
- /* Setup GPIO pin GPIO_USART1_TX. */
- gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
- GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART1_TX);
-
- /* Setup UART parameters. */
- usart_set_baudrate(USART1, 38400, rcc_ppre2_frequency);
- usart_set_databits(USART1, 8);
- usart_set_stopbits(USART1, USART_STOPBITS_1);
- usart_set_mode(USART1, USART_MODE_TX);
- usart_set_parity(USART1, USART_PARITY_NONE);
- usart_set_flow_control(USART1, USART_FLOWCONTROL_NONE);
-
- /* Finally enable the USART. */
- usart_enable(USART1);
-
- /* Setup GPIO pin GPIO_USART2_TX. */
- gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
- GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART2_TX);
-
- /* Setup UART parameters. */
- usart_set_baudrate(USART2, 38400, rcc_ppre1_frequency);
- usart_set_databits(USART2, 8);
- usart_set_stopbits(USART2, USART_STOPBITS_1);
- usart_set_mode(USART2, USART_MODE_TX);
- usart_set_parity(USART2, USART_PARITY_NONE);
- usart_set_flow_control(USART2, USART_FLOWCONTROL_NONE);
-
- /* Finally enable the USART. */
- usart_enable(USART2);
-
- /* Setup GPIO pin GPIO_USART3_TX/GPIO10 on GPIO port B for transmit. */
- gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ,
- GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART3_TX);
-
- /* Setup UART parameters. */
- usart_set_baudrate(USART3, 38400, rcc_ppre1_frequency);
- usart_set_databits(USART3, 8);
- usart_set_stopbits(USART3, USART_STOPBITS_1);
- usart_set_mode(USART3, USART_MODE_TX);
- usart_set_parity(USART3, USART_PARITY_NONE);
- usart_set_flow_control(USART3, USART_FLOWCONTROL_NONE);
-
- /* Finally enable the USART. */
- usart_enable(USART3);
-}
-
-void gpio_setup(void)
-{
- /* Set GPIO12 (in GPIO port C) to 'output push-pull'. */
- gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_2_MHZ,
- GPIO_CNF_OUTPUT_PUSHPULL, GPIO12);
-}
-
-int main(void)
-{
- int i, j = 0, c = 0;
-
- clock_setup();
- gpio_setup();
- usart_setup();
-
- /* Blink the LED (PC12) on the board with every transmitted byte. */
- while (1) {
- gpio_toggle(GPIOC, GPIO12); /* LED on/off */
- usart_send_blocking(USART1, c + '0'); /* USART1: Send byte. */
- usart_send_blocking(USART2, c + '0'); /* USART2: Send byte. */
- usart_send_blocking(USART3, c + '0'); /* USART3: Send byte. */
- c = (c == 9) ? 0 : c + 1; /* Increment c. */
- if ((j++ % 80) == 0) { /* Newline after line full. */
- usart_send_blocking(USART1, '\r');
- usart_send_blocking(USART1, '\n');
- usart_send_blocking(USART2, '\r');
- usart_send_blocking(USART2, '\n');
- usart_send_blocking(USART3, '\r');
- usart_send_blocking(USART3, '\n');
- }
- for (i = 0; i < 800000; i++) /* Wait a bit. */
- __asm__("NOP");
- }
-
- return 0;
-}