aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32-h103/usb_cdcacm/README
diff options
context:
space:
mode:
Diffstat (limited to 'examples/stm32-h103/usb_cdcacm/README')
-rw-r--r--examples/stm32-h103/usb_cdcacm/README36
1 files changed, 0 insertions, 36 deletions
diff --git a/examples/stm32-h103/usb_cdcacm/README b/examples/stm32-h103/usb_cdcacm/README
index fba104a..2f1ee4b 100644
--- a/examples/stm32-h103/usb_cdcacm/README
+++ b/examples/stm32-h103/usb_cdcacm/README
@@ -5,39 +5,3 @@ README
This example implements a USB CDC-ACM device (aka Virtual Serial Port)
to demonstrate the use of the USB device stack.
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase systick.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
-