aboutsummaryrefslogtreecommitdiff
path: root/examples/efm32/tinygecko/efm32-tg-stk3300/miniblink-efm32lib/miniblink.c
diff options
context:
space:
mode:
Diffstat (limited to 'examples/efm32/tinygecko/efm32-tg-stk3300/miniblink-efm32lib/miniblink.c')
-rw-r--r--examples/efm32/tinygecko/efm32-tg-stk3300/miniblink-efm32lib/miniblink.c69
1 files changed, 69 insertions, 0 deletions
diff --git a/examples/efm32/tinygecko/efm32-tg-stk3300/miniblink-efm32lib/miniblink.c b/examples/efm32/tinygecko/efm32-tg-stk3300/miniblink-efm32lib/miniblink.c
new file mode 100644
index 0000000..9fa0b23
--- /dev/null
+++ b/examples/efm32/tinygecko/efm32-tg-stk3300/miniblink-efm32lib/miniblink.c
@@ -0,0 +1,69 @@
+/*
+ * This file is part of the libopencm3 project.
+ *
+ * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2012 chrysn <chrysn@fsfe.org>
+ *
+ * This library is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this library. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <efm32_cmu.h>
+#include <efm32_gpio.h>
+
+void led_setup(void);
+void led_toggle(void);
+
+/** @file
+ * Minimal example for making the User LED of the EFM32-TG-STK330 eval board blink.
+ */
+
+/**
+ * Toggle the User LED in an infinite loop, with time between the toggling
+ * determined by a busy loop stupidly counting up.
+ */
+
+int main(void)
+{
+ int x;
+
+ led_setup();
+
+ while(1) {
+ for(x = 0; x < 200000; ++x) asm("mov r0,r0"); /* no-op, prevent compiler from optimizing this away */
+ led_toggle();
+ };
+}
+
+/**
+ * Enable GPIO, and set up port D7 as an output pin.
+ */
+
+void led_setup(void)
+{
+ // Before GPIO works, according to d0034_efm32tg_reference_manual.pdf
+ // note in section 28.3.7, we'll have to enable GPIO in CMU_HFPERCLKEN0
+
+ CMU->HFPERCLKEN0 |= _CMU_HFPERCLKEN0_GPIO_MASK;
+
+ // The User LED is connected to PD7 to the plus side of the LED
+ // according to t0011_efm32_tiny_gecko_stk_user_manual.pdf figures 16.2
+ // and 16.3 (called UIF_LED0)
+
+ GPIO_PinModeSet(gpioPortD, 7, gpioModePushPull, 0);
+}
+
+void led_toggle(void)
+{
+ GPIO_PinOutToggle(gpioPortD, 7);
+}