aboutsummaryrefslogtreecommitdiff
path: root/examples/other
diff options
context:
space:
mode:
authorUwe Hermann2010-12-29 19:49:59 +0100
committerUwe Hermann2010-12-29 19:49:59 +0100
commit01bfbfed411f9e96218070e2b36438b783df29ba (patch)
tree0f855fbcba35cb699b7d174b2c1b2e43057e5b37 /examples/other
parentd9f6f200c189922ff71ec13e1343303bfdae3593 (diff)
Deduplicate example README file contents.
Diffstat (limited to 'examples/other')
-rw-r--r--examples/other/adc_temperature_sensor/README39
-rw-r--r--examples/other/dma_mem2mem/README37
-rw-r--r--examples/other/dogm128/README39
-rw-r--r--examples/other/i2c_stts75_sensor/README38
-rw-r--r--examples/other/rtc/README37
-rw-r--r--examples/other/systick/README38
-rw-r--r--examples/other/timer_interrupt/README38
-rw-r--r--examples/other/usb_cdcacm/README36
-rw-r--r--examples/other/usb_dfu/README36
-rw-r--r--examples/other/usb_hid/README36
10 files changed, 6 insertions, 368 deletions
diff --git a/examples/other/adc_temperature_sensor/README b/examples/other/adc_temperature_sensor/README
index b049e10..aa00ef0 100644
--- a/examples/other/adc_temperature_sensor/README
+++ b/examples/other/adc_temperature_sensor/README
@@ -3,45 +3,8 @@ README
------------------------------------------------------------------------------
This example program sends some characters on USART1.
-Afterwards it read out the internal temperature sensor of the stm32 and
+Afterwards it read out the internal temperature sensor of the STM32 and
sends the value read out from the ADC to the USART1.
The terminal settings for the receiving device/PC are 115200 8n1.
-
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase adc.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
-
diff --git a/examples/other/dma_mem2mem/README b/examples/other/dma_mem2mem/README
index c680b84..2e61e5a 100644
--- a/examples/other/dma_mem2mem/README
+++ b/examples/other/dma_mem2mem/README
@@ -9,40 +9,3 @@ USART1.
The terminal settings for the receiving device/PC are 115200 8n1.
-
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase dma.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
-
diff --git a/examples/other/dogm128/README b/examples/other/dogm128/README
index f92b933..dbf82a0 100644
--- a/examples/other/dogm128/README
+++ b/examples/other/dogm128/README
@@ -2,41 +2,6 @@
README
------------------------------------------------------------------------------
-This example program writes some text on an DOGM128 LCD display connected to SPI2.
-
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase main.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
+This example program writes some text on an DOGM128 LCD display connected
+to SPI2.
diff --git a/examples/other/i2c_stts75_sensor/README b/examples/other/i2c_stts75_sensor/README
index 9d775af..91e3ff6 100644
--- a/examples/other/i2c_stts75_sensor/README
+++ b/examples/other/i2c_stts75_sensor/README
@@ -5,45 +5,9 @@ README
This example program sends some characters on USART1.
Afterwards it connects to an STTS75 sensor (ST LM75 compatible)
at adress A0/1/2=0 and sets reverse polarity, 26 degree Tos and Thyst.
+
It reads out the temperature and submits the temperature over USART1 in
binary format (ASCII 0/1).
The terminal settings for the receiving device/PC are 115200 8n1.
-
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase i2c_stts75_sensor.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
-
diff --git a/examples/other/rtc/README b/examples/other/rtc/README
index cc162bf..f1e3975 100644
--- a/examples/other/rtc/README
+++ b/examples/other/rtc/README
@@ -4,40 +4,3 @@ README
This is a small RTC example project.
-
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f board/olimex_stm32_h103.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase rtc.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "olimex_stm32_h103.cfg" with your respective board config file.
-
diff --git a/examples/other/systick/README b/examples/other/systick/README
index 7e9c5e5..affb4b8 100644
--- a/examples/other/systick/README
+++ b/examples/other/systick/README
@@ -3,41 +3,5 @@ README
------------------------------------------------------------------------------
This example program blinks a LED on PortB Pin 6. 1 second on / 1 second off.
-Blinking is done thru the systick timer interrupt.
-
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase systick.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
+Blinking is done via the systick timer interrupt.
diff --git a/examples/other/timer_interrupt/README b/examples/other/timer_interrupt/README
index a41ebbb..e6a22c4 100644
--- a/examples/other/timer_interrupt/README
+++ b/examples/other/timer_interrupt/README
@@ -3,41 +3,5 @@ README
------------------------------------------------------------------------------
This example program blinks a LED on PortB Pin 6. 1 second on / 1 second off.
-Blinking is made only with timer interrupt from TIM2 timer.
-
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase timer.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
+Blinking is made only with the timer interrupt of the TIM2 timer.
diff --git a/examples/other/usb_cdcacm/README b/examples/other/usb_cdcacm/README
index fba104a..2f1ee4b 100644
--- a/examples/other/usb_cdcacm/README
+++ b/examples/other/usb_cdcacm/README
@@ -5,39 +5,3 @@ README
This example implements a USB CDC-ACM device (aka Virtual Serial Port)
to demonstrate the use of the USB device stack.
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase systick.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
-
diff --git a/examples/other/usb_dfu/README b/examples/other/usb_dfu/README
index 7146618..9c0169a 100644
--- a/examples/other/usb_dfu/README
+++ b/examples/other/usb_dfu/README
@@ -5,39 +5,3 @@ README
This example implements a USB Device Firmware Upgrade (DFU) bootloader
to demonstrate the use of the USB device stack.
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase systick.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
-
diff --git a/examples/other/usb_hid/README b/examples/other/usb_hid/README
index 792e0bd..92645c9 100644
--- a/examples/other/usb_hid/README
+++ b/examples/other/usb_hid/README
@@ -5,39 +5,3 @@ README
This example implements a USB Human Interface Device (HID)
to demonstrate the use of the USB device stack.
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase systick.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm32.cfg" with your respective config file.
-