aboutsummaryrefslogtreecommitdiff
path: root/examples/lisa-m
diff options
context:
space:
mode:
authorUwe Hermann2010-12-29 19:49:59 +0100
committerUwe Hermann2010-12-29 19:49:59 +0100
commit01bfbfed411f9e96218070e2b36438b783df29ba (patch)
tree0f855fbcba35cb699b7d174b2c1b2e43057e5b37 /examples/lisa-m
parentd9f6f200c189922ff71ec13e1343303bfdae3593 (diff)
Deduplicate example README file contents.
Diffstat (limited to 'examples/lisa-m')
-rw-r--r--examples/lisa-m/usb_dfu/README36
-rw-r--r--examples/lisa-m/usb_hid/README36
2 files changed, 0 insertions, 72 deletions
diff --git a/examples/lisa-m/usb_dfu/README b/examples/lisa-m/usb_dfu/README
index 7146618..9c0169a 100644
--- a/examples/lisa-m/usb_dfu/README
+++ b/examples/lisa-m/usb_dfu/README
@@ -5,39 +5,3 @@ README
This example implements a USB Device Firmware Upgrade (DFU) bootloader
to demonstrate the use of the USB device stack.
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase systick.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
-
diff --git a/examples/lisa-m/usb_hid/README b/examples/lisa-m/usb_hid/README
index 3ba2aa6..48a9b39 100644
--- a/examples/lisa-m/usb_hid/README
+++ b/examples/lisa-m/usb_hid/README
@@ -5,39 +5,3 @@ README
This example implements a USB Human Interface Device (HID)
to demonstrate the use of the USB device stack.
-Building
---------
-
- $ make
-
-Running 'make' on the top-level libopenstm32 directory will automatically
-also build this example. Or you can build the library "manually" and
-then run 'make' in this directory.
-
-You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
-
- $ PREFIX=arm-none-eabi make
-
-For a more verbose build you can use
-
- $ make V=1
-
-
-Flashing
---------
-
-You can flash the generated code using OpenOCD:
-
- $ make flash
-
-Or you can do the same manually via:
-
- $ openocd -f interface/jtagkey-tiny.cfg -f target/stm32.cfg
- $ telnet localhost 4444
- > reset halt
- > flash write_image erase systick.hex
- > reset
-
-Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
-replace "stm.cfg" with your respective config file.
-