/* * This file is part of the Black Magic Debug project. * * Copyright (C) 2011 Black Sphere Technologies Ltd. * Written by Gareth McMullin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ /* This file implements the platform specific functions for the ST-Link * implementation. */ #include #include #include #include #include #include #include #include "platform.h" #include "jtag_scan.h" #include #include uint8_t running_status; volatile uint32_t timeout_counter; jmp_buf fatal_error_jmpbuf; int platform_init(void) { rcc_clock_setup_in_hse_8mhz_out_72mhz(); /* Enable peripherals */ rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USBEN); rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN); rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN); rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN); /* Setup GPIO ports */ gpio_set_mode(TMS_PORT, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, TMS_PIN); gpio_set_mode(TCK_PORT, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, TCK_PIN); gpio_set_mode(TDI_PORT, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, TDI_PIN); gpio_set_mode(LED_PORT, GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, LED_IDLE_RUN); /* Setup heartbeat timer */ systick_set_clocksource(STK_CTRL_CLKSOURCE_AHB_DIV8); systick_set_reload(900000); /* Interrupt us at 10 Hz */ SCB_SHPR(11) &= ~((15 << 4) & 0xff); SCB_SHPR(11) |= ((14 << 4) & 0xff); systick_interrupt_enable(); systick_counter_enable(); usbuart_init(); SCB_VTOR = 0x2000; // Relocate interrupt vector table here cdcacm_init(); jtag_scan(NULL); return 0; } void platform_delay(uint32_t delay) { timeout_counter = delay; while(timeout_counter); } void sys_tick_handler(void) { if(running_status) gpio_toggle(LED_PORT, LED_IDLE_RUN); if(timeout_counter) timeout_counter--; } const char *morse_msg; void morse(const char *msg, char repeat) { (void)repeat; morse_msg = msg; } const char *platform_target_voltage(void) { return "unknown"; }