From 73139a77b7c3d9547719d5b94190a8e5871f1723 Mon Sep 17 00:00:00 2001 From: Richard Eoin Meadows Date: Mon, 19 Aug 2013 15:21:36 +0100 Subject: Fixed up README --- hardware/contrib/richardeoin/README.md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'hardware/contrib/richardeoin/README.md') diff --git a/hardware/contrib/richardeoin/README.md b/hardware/contrib/richardeoin/README.md index 7796b16..1f0b980 100644 --- a/hardware/contrib/richardeoin/README.md +++ b/hardware/contrib/richardeoin/README.md @@ -1,23 +1,23 @@ This variant attempts to be as faitful to the Blackmagic mini as possible, but also has several diferences. -The schematic and board have both been designed using Cadsoft EAGLE v6.4.0 +The schematic and board have both been designed using Cadsoft EAGLE v6.4.0. -### Differences +## Differences -#### Uses 0603 [1608 Metric] components +### Uses 0603 [1608 Metric] components Makes reflow soldering much easier. -#### Includes Level Translator +### Includes Level Translator This board incorporates the same level translator used in the full-sized Blackmagic, so it can be used to safely program 2.7V or 1.8V systems. -#### USART Connector +### USART Connector The STM32F103's USART1 peripheral is broken out into a 0.1" header. The hole centres are [slightly offset to allow a press-fit](https://www.sparkfun.com/tutorials/114). -#### BOOT0 Button +### BOOT0 Button As well as the standard button for entering USB DFU mode, this variant also provides a button for pulling the BOOT0 pin high to activate the @@ -25,9 +25,9 @@ STM32 SystemMemory bootloeader. This means that /scripts/bootprog.py can be used to program and reprogram the chip over the USART1 interface. -### Parts and Costings +## Parts and Costings -* [Parts List][Parts.md] +* [Parts List](Parts.md) Parts Cost (Approximate): £14 + VAT ([uk.farnell.com](uk.farnell.com) August 2013) Programming Cable: £8.49 + VAT ([uk.farnell.com](http://uk.farnell.com/samtec/ffsd-05-d-06-00-01-n/ribbon-cable-idc-152-4mm-grey-10way/dp/1667659) August 2013)3D -- cgit v1.2.3