/* LUFA Library Copyright (C) Dean Camera, 2009. dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the name of the author not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software. */ /** \file * * Header file for BootloaderDFU.c. */ #ifndef _BOOTLOADER_H_ #define _BOOTLOADER_H_ /* Includes: */ #include #include #include #include #include #include "Descriptors.h" #include // USB Functionality /* Macros: */ /** Major bootloader version number. */ #define BOOTLOADER_VERSION_MINOR 2 /** Minor bootloader version number. */ #define BOOTLOADER_VERSION_REV 0 /** Complete bootloder version number expressed as a packed byte, constructed from the * two individual bootloader version macros. */ #define BOOTLOADER_VERSION ((BOOTLOADER_VERSION_MINOR << 4) | BOOTLOADER_VERSION_REV) /** First byte of the bootloader identification bytes, used to identify a device's bootloader. */ #define BOOTLOADER_ID_BYTE1 0xDC /** Second byte of the bootloader identification bytes, used to identify a device's bootloader. */ #define BOOTLOADER_ID_BYTE2 0xFB /** Convenience macro, used to determine if the issued command is the given one-byte long command. * * \param dataarr Command byte array to check against * \param cb1 First command byte to check */ #define IS_ONEBYTE_COMMAND(dataarr, cb1) (dataarr[0] == cb1) /** Convenience macro, used to determine if the issued command is the given two-byte long command. * * \param dataarr Command byte array to check against * \param cb1 First command byte to check * \param cb2 Second command byte to check */ #define IS_TWOBYTE_COMMAND(dataarr, cb1, cb2) ((dataarr[0] == cb1) && (dataarr[1] == cb2)) /** Length of the DFU file suffix block, appended to the end of each complete memory write command. * The DFU file suffix is currently unused (but is designed to give extra file information, such as * a CRC of the complete firmware for error checking) and so is discarded. */ #define DFU_FILE_SUFFIX_SIZE 16 /** Length of the DFU file filler block, appended to the start of each complete memory write command. * Filler bytes are added to the start of each complete memory write command, and must be discarded. */ #define DFU_FILLER_BYTES_SIZE 26 /** DFU class command request to detatch from the host. */ #define DFU_DETATCH 0x00 /** DFU class command request to send data from the host to the bootloader. */ #define DFU_DNLOAD 0x01 /** DFU class command request to send data from the bootloader to the host. */ #define DFU_UPLOAD 0x02 /** DFU class command request to get the current DFU status and state from the bootloader. */ #define DFU_GETSTATUS 0x03 /** DFU class command request to reset the current DFU status and state variables to their defaults. */ #define DFU_CLRSTATUS 0x04 /** DFU class command request to get the current DFU state of the bootloader. */ #define DFU_GETSTATE 0x05 /** DFU class command request to abort the current multi-request transfer and return to the dfuIDLE state. */ #define DFU_ABORT 0x06 /** DFU command to begin programming the device's memory. */ #define COMMAND_PROG_START 0x01 /** DFU command to begin reading the device's memory. */ #define COMMAND_DISP_DATA 0x03 /** DFU command to issue a write command. */ #define COMMAND_WRITE 0x04 /** DFU command to issue a read command. */ #define COMMAND_READ 0x05 /** DFU command to issue a memory base address change command, to set the current 64KB flash page * that subsequent flash operations should use. */ #define COMMAND_CHANGE_BASE_ADDR 0x06 /* Type Defines: */ /** Type define for a non-returning function pointer to the loaded application. */ typedef void (*AppPtr_t)(void) ATTR_NO_RETURN; /** Type define for a strucuture containing a complete DFU command issued by the host. */ typedef struct { uint8_t Command; /**< Single byte command to perform, one of the COMMAND_* macro values */ uint8_t Data[5]; /**< Command parameters */ uint16_t DataSize; /**< Size of the command parameters */ } DFU_Command_t; /* Enums: */ /** DFU bootloader states. Refer to the DFU class specification for information on each state. */ enum DFU_State_t { appIDLE = 0, appDETACH = 1, dfuIDLE = 2, dfuDNLOAD_SYNC = 3, dfuDNBUSY = 4, dfuDNLOAD_IDLE = 5, dfuMANIFEST_SYNC = 6, dfuMANIFEST = 7, dfuMANIFEST_WAIT_RESET = 8, dfuUPLOAD_IDLE = 9, dfuERROR = 10 }; /** DFU command status error codes. Refer to the DFU class specification for information on each error code. */ enum DFU_Status_t { OK = 0, errTARGET = 1, errFILE = 2, errWRITE = 3, errERASE = 4, errCHECK_ERASED = 5, errPROG = 6, errVERIFY = 7, errADDRESS = 8, errNOTDONE = 9, errFIRMWARE = 10, errVENDOR = 11, errUSBR = 12, errPOR = 13, errUNKNOWN = 14, errSTALLEDPKT = 15 }; /* Event Handlers: */ /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */ HANDLES_EVENT(USB_Disconnect); /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */ HANDLES_EVENT(USB_UnhandledControlPacket); /* Function Prototypes: */ #if defined(INCLUDE_FROM_BOOTLOADER_C) static void DiscardFillerBytes(uint8_t NumberOfBytes); static void ProcessBootloaderCommand(void); static void LoadStartEndAddresses(void); static void ProcessMemProgCommand(void); static void ProcessMemReadCommand(void); static void ProcessWriteCommand(void); static void ProcessReadCommand(void); #endif #endif