From 22abd06132445a55a1a0266897920f26634825c1 Mon Sep 17 00:00:00 2001 From: Florent Duchon Date: Wed, 26 Dec 2012 17:38:10 +0100 Subject: digital/beacon: remove obsolete bitcloud stack --- .../NWK/include/private/nwkRouteRequest.h | 149 --------------------- 1 file changed, 149 deletions(-) delete mode 100644 digital/beacon/src/Bitcloud_stack/Components/NWK/include/private/nwkRouteRequest.h (limited to 'digital/beacon/src/Bitcloud_stack/Components/NWK/include/private/nwkRouteRequest.h') diff --git a/digital/beacon/src/Bitcloud_stack/Components/NWK/include/private/nwkRouteRequest.h b/digital/beacon/src/Bitcloud_stack/Components/NWK/include/private/nwkRouteRequest.h deleted file mode 100644 index 45bf6d03..00000000 --- a/digital/beacon/src/Bitcloud_stack/Components/NWK/include/private/nwkRouteRequest.h +++ /dev/null @@ -1,149 +0,0 @@ -/**************************************************************************//** - \file nwkRouteRequest.h - - \brief Interface of route request commands. - - \author - Atmel Corporation: http://www.atmel.com \n - Support email: avr@atmel.com - - Copyright (c) 2008-2011, Atmel Corporation. All rights reserved. - Licensed under Atmel's Limited License Agreement (BitCloudTM). - - \internal - History: - 2007-09-17 V. Panov - Created. - 2008-12-10 M. Gekk - Optimization of NWK memory. - 2009-11-20 M. Gekk - Refactoring. - Last change: - $Id: nwkRouteRequest.h 18498 2011-09-12 08:49:29Z mgekk $ - ******************************************************************************/ -#if !defined _NWK_ROUTE_REQUEST_H -#define _NWK_ROUTE_REQUEST_H - -/****************************************************************************** - Includes section - ******************************************************************************/ -#include -#include -#include -#include -#include -#include - -/****************************************************************************** - Define(s) section - ******************************************************************************/ -/** Transmission parameters of route request command. */ -#define NWK_INITIAL_ROUTE_REQ_TX_PARAMETERS \ - {NWK_TX_DELAY_INITIAL_ROUTE_REQUEST, NULL, nwkConfirmRouteRequestTx, true} -#define NWK_ROUTE_REQ_TX_PARAMETERS \ - {NWK_TX_DELAY_ROUTE_REQUEST, NULL, NULL, true} -#define NWK_INITIAL_MANYTOONE_ROUTE_REQ_TX_PARAMETERS \ - {NWK_TX_DELAY_INITIAL_MANYTOONE_ROUTE_REQUEST, NULL, nwkConfirmRouteRequestTx, true} -#define NWK_MANYTOONE_ROUTE_REQ_TX_PARAMETERS \ - {NWK_TX_DELAY_MANYTOONE_ROUTE_REQUEST, NULL, NULL, true} - -/****************************************************************************** - Types section - ******************************************************************************/ -/** Many-to-One field values. See ZigBee spec r18, 3.4.1.3.1.1, page 320. */ -typedef enum _NwkRReqManyToOneFlag_t -{ - /** The route request is not a many-to-one route request. */ - NWK_RREQ_IS_NOT_MANY_TO_ONE = 0, - /** The route request is a many-to-one route request and the sender supports - * a route record table.*/ - NWK_RREQ_IS_MANY_TO_ONE = 1, - /** The route request is a many-to-one route request and the sender does not - * support a route record table. */ - NWK_RREQ_IS_MANY_TO_ONE_NO_RREC_TABLE = 2, - NWK_RREQ_RESERVED_MANY_TO_ONE_FLAG = 3 -} NwkRReqManyToOneFlag_t; - -BEGIN_PACK -/** Route request command options field. ZigBee spec r18, 3.4.1.3.1, page 320. - **/ -typedef struct PACK _NwkRouteRequestOptions_t -{ - LITTLE_ENDIAN_OCTET(5, ( - NwkBitField_t reserved1 : 3, - /** The many-to-one field shall have one of the non-reserved values shown - * in ZigBee spec r18, Table 3.41 and type NwkRReqManyToOneFlag_t. */ - NwkBitField_t manyToOne : 2, - /** The destination IEEE address field is a single-bit field. It shall have - * a value of 1 if, and only if, the command frame contains the destination - * IEEE address. ZigBee spec r18, 3.4.1.3.1.2, page 321. */ - NwkBitField_t dstExt : 1, - /** The multicast sub-field is a single-bit field. It shall have a value - * of 1 if, and only if, the command frame is a request for a route - * to a multicast group... ZigBee spec r18, 3.4.1.3.1.3, page 321. */ - NwkBitField_t multicast : 1, - NwkBitField_t reserved2 : 1 - )) -} NwkRouteRequestOptions_t; -END_PACK - -BEGIN_PACK -/** Route request command frame format. See ZigBee spec r18, - * Figure 3.11, page 319. */ -typedef struct PACK _NwkRouteRequestPayload_t -{ - /** The identifier of the route request command. */ - uint8_t commandId; - /** Route request command options field. See NwkRouteRequestOptions_t. */ - NwkRouteRequestOptions_t options; - /** The route request identifier is an 8-bit sequence number for route - * requests and is incremented by 1 every time the NWK layer on a particular - * device issues a route request. ZigBee spec r18, 3.4.1.3.2, page 321. */ - NwkRouteRequestId_t identifier; - /** The destination address shall be 2 octets in length and represents - * the intended destination of the route request command frame. - * ZigBee spec r18, 3.4.1.3.3. */ - ShortAddr_t dstAddr; - /** The path cost field is eight bits in length and is used to accumulate - * routing cost information as a route request command frame moves through - * the network. ZigBee spec r18, 3.4.1.3.4, page 321; sub-clause 3.6.3.5.2. */ - NwkPathCost_t pathCost; - /** The destination IEEE address shall be 8 octets in length and represents - * the IEEE address of the destination of the route request command frame. - ** ZigBee spec r18, 3.4.1.3.5, page 321. */ - ExtAddr_t dstExtAddr; -} NwkRouteRequestPayload_t; -END_PACK - -/****************************************************************************** - Prototypes section - ******************************************************************************/ -#if defined NWK_ROUTING_CAPACITY \ - && (defined _NWK_MESH_ROUTING_ || defined _NWK_MANY_TO_ONE_ROUTING_) -/**************************************************************************//** - \brief Action when route request command received. - - \param[in] payload - pointer to payload of route request command. - \param[in] header - pointer to raw network header of route request command. - \param[in] parse - parsed header fields. - - \return 'true' if continue processing of command packet otherwise 'false'. - ******************************************************************************/ -NWK_PRIVATE bool nwkRouteRequestFrameInd(const uint8_t *const payload, - const NwkFrameHeader_t *const header, const NwkParseHeader_t *const parse); - -/**************************************************************************//** - \brief Prepare header and payload of the route request command. - - \param[in] outPkt - pointer to output packet. - \param[in] entry - pointer to a route discovery entry. - \return None. - ******************************************************************************/ -NWK_PRIVATE void nwkPrepareRouteRequestTx(NwkOutputPacket_t *const outPkt, - NwkRouteDiscoveryEntry_t *const entry); - -#else /* NWK_ROUTING_CAPACITY and (_NWK_MESH_ROUTING_ or _NWK_MANY_TO_ONE_ROUTING_) */ - -#define nwkRouteRequestFrameInd NULL - -#endif /* NWK_ROUTING_CAPACITY and (_NWK_MESH_ROUTING_ or _NWK_MANY_TO_ONE_ROUTING_) */ -#endif /* _NWK_ROUTE_REQUEST_H */ -/** eof nwkRouteRequest.h */ - -- cgit v1.2.3