From 74298f8ca11dc8d3b0359d1d4e124d6494c3eeac Mon Sep 17 00:00:00 2001 From: Nicolas Schodet Date: Fri, 10 Apr 2009 01:15:42 +0200 Subject: * digital/avr/modules/usb: - imported LUFA. --- .../usb/lufa/LUFA/Drivers/USB/LowLevel/LowLevel.h | 371 +++++++++++++++++++++ 1 file changed, 371 insertions(+) create mode 100644 digital/avr/modules/usb/lufa/LUFA/Drivers/USB/LowLevel/LowLevel.h (limited to 'digital/avr/modules/usb/lufa/LUFA/Drivers/USB/LowLevel/LowLevel.h') diff --git a/digital/avr/modules/usb/lufa/LUFA/Drivers/USB/LowLevel/LowLevel.h b/digital/avr/modules/usb/lufa/LUFA/Drivers/USB/LowLevel/LowLevel.h new file mode 100644 index 00000000..faafbd7b --- /dev/null +++ b/digital/avr/modules/usb/lufa/LUFA/Drivers/USB/LowLevel/LowLevel.h @@ -0,0 +1,371 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main low level USB driver. This module manages the low level initialization and shut down of the USB AVR's + * USB interface in either device or (if supported) host mode. + */ + +#ifndef __USBLOWLEVEL_H__ +#define __USBLOWLEVEL_H__ + + /* Includes: */ + #include + #include + #include + + #include "USBMode.h" + #include "../../../Common/Common.h" + #include "../HighLevel/Events.h" + #include "../HighLevel/USBTask.h" + #include "../HighLevel/USBInterrupt.h" + + #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) + #include "Host.h" + #include "Pipe.h" + #include "OTG.h" + #endif + + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #include "Device.h" + #include "Endpoint.h" + #include "DevChapter9.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks and Defines: */ + #if (F_CPU == 8000000) + #if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__)) + #define USB_PLL_PSC 0 + #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || \ + defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || \ + defined(__AVR_ATmega32U6__)) + #define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0)) + #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) + #define USB_PLL_PSC 0 + #endif + #elif (F_CPU == 16000000) + #if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_ATmega32U6__)) + #define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP1)) + #elif (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)) + #define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP0)) + #elif (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__)) + #define USB_PLL_PSC (1 << PLLP0) + #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) + #define USB_PLL_PSC (1 << PINDIV) + #endif + #endif + + #if !defined(USB_PLL_PSC) + #error No PLL prescale value available for chosen F_CPU value and AVR model. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Mode mask for the USB_CurrentMode global. This indicates that the USB interface is currently not + * initialized into any mode. + */ + #define USB_MODE_NONE 0 + + /** Mode mask for the USB_CurrentMode global and the USB_Init() function. This indicates that the + * USB interface is or should be initialized in the USB device mode. + */ + #define USB_MODE_DEVICE 1 + + /** Mode mask for the USB_CurrentMode global and the USB_Init() function. This indicates that the + * USB interface is or should be initialized in the USB host mode. + * + * \note Not all USB AVRs support host mode. + */ + #define USB_MODE_HOST 2 + + /** Mode mask for the the USB_Init() function. This indicates that the USB interface should be + * initialized into whatever mode the UID pin of the USB AVR indicates, and that the device + * should swap over its mode when the level of the UID pin changes during operation. + * + * \note Not all USB AVRs support host mode, and thus UID mode. + */ + #define USB_MODE_UID 3 + + /** Regulator disable option mask for USB_Init(). This indicates that the internal 3.3V USB data pad + * regulator should be enabled to regulate the data pin voltages to within the USB standard. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_DISABLED (1 << 1) + + /** Regulator enable option mask for USB_Init(). This indicates that the internal 3.3V USB data pad + * regulator should be disabled and the AVR's VCC level used for the data pads. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_ENABLED (0 << 1) + + /** Manual PLL control option mask for USB_Init(). This indicates to the library that the user application + * will take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock + * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations. + */ + #define USB_OPT_MANUAL_PLL (1 << 2) + + /** Automatic PLL control option mask for USB_Init(). This indicates to the library that the library should + * take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock + * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations. + */ + #define USB_OPT_AUTO_PLL (0 << 2) + + /** Mask for a CONTROL type endpoint or pipe. + * + * \note See Endpoint.h and Pipe.h headers for endpoint/pipe functions. + */ + #define EP_TYPE_CONTROL 0b00 + + /** Mask for an ISOCHRONOUS type endpoint or pipe. + * + * \note See Endpoint.h and Pipe.h headers for endpoint/pipe functions. + */ + #define EP_TYPE_ISOCHRONOUS 0b01 + + /** Mask for a BULK type endpoint or pipe. + * + * \note See Endpoint.h and Pipe.h headers for endpoint/pipe functions. + */ + #define EP_TYPE_BULK 0b10 + + /** Mask for an INTERRUPT type endpoint or pipe. + * + * \note See Endpoint.h and Pipe.h headers for endpoint/pipe functions. + */ + #define EP_TYPE_INTERRUPT 0b11 + + /** Mask for determining the type of an endpoint or pipe. This should then be compared with the + * EP_TYPE_* macros elsewhere in this module to determine the exact type of the endpoint or pipe. + * + * \note See Endpoint.h and Pipe.h headers for endpoint/pipe functions. + */ + #define EP_TYPE_MASK 0b11 + + /** Returns boolean true if the VBUS line is currently high (i.e. the USB host is supplying power), + * otherwise returns false. + */ + #define USB_VBUS_GetStatus() ((USBSTA & (1 << VBUS)) ? true : false) + + /** Detaches the device from the USB bus. This has the effect of removing the device from any + * host if, ceasing USB communications. If no host is present, this prevents any host from + * enumerating the device once attached until USB_Attach() is called. + */ + #define USB_Detach() MACROS{ UDCON |= (1 << DETACH); }MACROE + + /** Attaches the device to the USB bus. This announces the device's presence to any attached + * USB host, starting the enumeration process. If no host is present, attaching the device + * will allow for enumeration once a host is connected to the device. + * + * This is inexplicably also required for proper operation while in host mode, to enable the + * attachment of a device to the host. This is despite the bit being located in the device-mode + * register and despite the datasheet making no mention of its requirement in host mode. + */ + #define USB_Attach() MACROS{ UDCON &= ~(1 << DETACH); }MACROE + + #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__) + /** Constant for the maximum software timeout period of the USB data stream transfer functions + * (both control and standard) when in either device or host mode. If the next packet of a stream + * is not received or acknowedged within this time period, the stream function will fail. + * + * This value may be overridden in the user project makefile as the value of the + * USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch. + */ + #define USB_STREAM_TIMEOUT_MS 100 + #endif + + /* Function Prototypes: */ + /** Main function to initialize and start the USB interface. Once active, the USB interface will + * allow for device connection to a host when in device mode, or for device enumeration while in + * host mode. + * + * As the USB library relies on USB interrupts for some of its functionality, this routine will + * enable global interrupts. + * + * Calling this function when the USB interface is already initialized will cause a complete USB + * interface reset and re-enumeration. + * + * \param Mode This is a mask indicating what mode the USB interface is to be initialized to. + * Valid mode masks are USB_MODE_DEVICE, USB_MODE_HOST or USB_MODE_UID. + * + * \param Options Mask indicating the options which should be used when initializing the USB + * interface to control the USB interface's behaviour. This should be comprised of + * a USB_OPT_REG_* mask to control the regulator, a USB_OPT_*_PLL mask to control the + * PLL, and a USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device + * mode speed. + * + * \note To reduce the FLASH requirements of the library if only device or host mode is required, + * this can be statically set via defining the token USB_DEVICE_ONLY for device mode or + * USB_HOST_ONLY for host mode in the use project makefile, passing the token to the compiler + * via the -D switch. If the mode is statically set, this parameter does not exist in the + * function prototype. + * + * \note To reduce the FLASH requirements of the library if only fixed settings are are required, + * the options may be set statically in the same manner as the mode (see the Mode parameter of + * this function). To statically set the USB options, pass in the USE_STATIC_OPTIONS token, + * defined to the appropriate options masks. When the options are statically set, this + * parameter does not exist in the function prototype. + * + * \note The mode parameter does not exist on devices where only one mode is possible, such as USB + * AVR models which only implement the USB device mode in hardware. + * + * \see Device.h for the USB_DEVICE_OPT_* masks. + */ + void USB_Init( + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + const uint8_t Options + #endif + ); + + /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO + * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface + * is restarted with the USB_Init() function. + */ + void USB_ShutDown(void); + + /** Resets the interface, when already initialized. This will re-enumerate the device if already connected + * to a host, or re-enumerate an already attached device when in host mode. + */ + void USB_ResetInterface(void); + + /* Enums: */ + /** Enum for error codes relating to the powering on of the USB interface. These error codes are + * used in the ErrorCode parameter value of the USB_PowerOnFail event. + */ + enum USB_PowerOnErrorCodes_t + { + POWERON_ERROR_NoUSBModeSpecified = 0, /**< Indicates that USB_Init() was called with an + * invalid or missing Mode parameter. + */ + }; + + /* Global Variables: */ + #if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__) + /** Indicates the mode that the USB interface is currently initialized to. This value will be + * one of the USB_MODE_* masks defined elsewhere in this module. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + extern volatile uint8_t USB_CurrentMode; + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + extern volatile uint8_t USB_Options; + /** Indicates the current USB options that the USB interface was initialized with when USB_Init() + * was called. This value will be one of the USB_MODE_* masks defined elsewhere in this module. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + #endif + + /* Throwable Events: */ + /** This module raises the USB_Disconnect event if the USB interface is reset (such as during a mode + * change while in UID mode) while the USB interface is connected to a device when in host mode, or + * a host while in device mode. + * + * \see Events.h for more information on this event. + */ + RAISES_EVENT(USB_Disconnect); + + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + /** This module raises the Power On Failure event when an error occurs while initializing the USB + * interface. + * + * \see Events.h for more information on this event. + */ + RAISES_EVENT(USB_PowerOnFail); + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define USB_PLL_On() MACROS{ PLLCSR = USB_PLL_PSC; PLLCSR |= (1 << PLLE); }MACROE + #define USB_PLL_Off() MACROS{ PLLCSR = 0; }MACROE + #define USB_PLL_IsReady() ((PLLCSR & (1 << PLOCK)) ? true : false) + + #if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) + #define USB_REG_On() MACROS{ UHWCON |= (1 << UVREGE); }MACROE + #define USB_REG_Off() MACROS{ UHWCON &= ~(1 << UVREGE); }MACROE + #else + #define USB_REG_On() MACROS{ REGCR &= ~(1 << REGDIS); }MACROE + #define USB_REG_Off() MACROS{ REGCR |= (1 << REGDIS); }MACROE + #endif + + #define USB_OTGPAD_On() MACROS{ USBCON |= (1 << OTGPADE); }MACROE + #define USB_OTGPAD_Off() MACROS{ USBCON &= ~(1 << OTGPADE); }MACROE + + #define USB_CLK_Freeze() MACROS{ USBCON |= (1 << FRZCLK); }MACROE + #define USB_CLK_Unfreeze() MACROS{ USBCON &= ~(1 << FRZCLK); }MACROE + + #define USB_Interface_Enable() MACROS{ USBCON |= (1 << USBE); }MACROE + #define USB_Interface_Disable() MACROS{ USBCON &= ~(1 << USBE); }MACROE + #define USB_Interface_Reset() MACROS{ uint8_t Temp = USBCON; USBCON = (Temp & ~(1 << USBE)); \ + USBCON = (Temp | (1 << USBE)); }MACROE + + /* Inline Functions: */ + static inline uint8_t USB_GetUSBModeFromUID(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t USB_GetUSBModeFromUID(void) + { + #if (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__)) + if (USBSTA & (1 << ID)) + return USB_MODE_DEVICE; + else + return USB_MODE_HOST; + #else + return USB_MODE_DEVICE; + #endif + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif -- cgit v1.2.3