From 74298f8ca11dc8d3b0359d1d4e124d6494c3eeac Mon Sep 17 00:00:00 2001 From: Nicolas Schodet Date: Fri, 10 Apr 2009 01:15:42 +0200 Subject: * digital/avr/modules/usb: - imported LUFA. --- digital/avr/modules/usb/lufa/Demos/CDC/CDC.c | 318 +++++++++++++++++++++++++++ 1 file changed, 318 insertions(+) create mode 100644 digital/avr/modules/usb/lufa/Demos/CDC/CDC.c (limited to 'digital/avr/modules/usb/lufa/Demos/CDC/CDC.c') diff --git a/digital/avr/modules/usb/lufa/Demos/CDC/CDC.c b/digital/avr/modules/usb/lufa/Demos/CDC/CDC.c new file mode 100644 index 00000000..6e232a48 --- /dev/null +++ b/digital/avr/modules/usb/lufa/Demos/CDC/CDC.c @@ -0,0 +1,318 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2009. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, and distribute this software + and its documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice appear in all + copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the CDC demo. This file contains the main tasks of the demo and + * is responsible for the initial application hardware configuration. + */ + +#include "CDC.h" + +/* Project Tags, for reading out using the ButtLoad project */ +BUTTLOADTAG(ProjName, "LUFA CDC App"); +BUTTLOADTAG(BuildTime, __TIME__); +BUTTLOADTAG(BuildDate, __DATE__); +BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING); + +/* Scheduler Task List */ +TASK_LIST +{ + { Task: USB_USBTask , TaskStatus: TASK_STOP }, + { Task: CDC_Task , TaskStatus: TASK_STOP }, +}; + +/* Globals: */ +/** Contains the current baud rate and other settings of the virtual serial port. While this demo does not use + * the physical USART and thus does not use these settings, they must still be retained and returned to the host + * upon request or the host will assume the device is non-functional. + * + * These values are set by the host via a class-specific request, however they are not required to be used accurately. + * It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical + * serial link characteristics and instead sends and recieves data in endpoint streams. + */ +CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600, + CharFormat: OneStopBit, + ParityType: Parity_None, + DataBits: 8 }; + +/** String to print through the virtual serial port when the joystick is pressed upwards. */ +char JoystickUpString[] = "Joystick Up\r\n"; + +/** String to print through the virtual serial port when the joystick is pressed downwards. */ +char JoystickDownString[] = "Joystick Down\r\n"; + +/** String to print through the virtual serial port when the joystick is pressed left. */ +char JoystickLeftString[] = "Joystick Left\r\n"; + +/** String to print through the virtual serial port when the joystick is pressed right. */ +char JoystickRightString[] = "Joystick Right\r\n"; + +/** String to print through the virtual serial port when the joystick is pressed inwards. */ +char JoystickPressedString[] = "Joystick Pressed\r\n"; + +/** Main program entry point. This routine configures the hardware required by the application, then + * starts the scheduler to run the application tasks. + */ +int main(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable Clock Division */ + SetSystemClockPrescaler(0); + + /* Hardware Initialization */ + Joystick_Init(); + LEDs_Init(); + + /* Indicate USB not ready */ + UpdateStatus(Status_USBNotReady); + + /* Initialize Scheduler so that it can be used */ + Scheduler_Init(); + + /* Initialize USB Subsystem */ + USB_Init(); + + /* Scheduling - routine never returns, so put this last in the main function */ + Scheduler_Start(); +} + +/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and + * starts the library USB task to begin the enumeration and USB management process. + */ +EVENT_HANDLER(USB_Connect) +{ + /* Start USB management task */ + Scheduler_SetTaskMode(USB_USBTask, TASK_RUN); + + /* Indicate USB enumerating */ + UpdateStatus(Status_USBEnumerating); +} + +/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via + * the status LEDs and stops the USB management and CDC management tasks. + */ +EVENT_HANDLER(USB_Disconnect) +{ + /* Stop running CDC and USB management tasks */ + Scheduler_SetTaskMode(CDC_Task, TASK_STOP); + Scheduler_SetTaskMode(USB_USBTask, TASK_STOP); + + /* Indicate USB not ready */ + UpdateStatus(Status_USBNotReady); +} + +/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration + * of the USB device after enumeration - the device endpoints are configured and the CDC management task started. + */ +EVENT_HANDLER(USB_ConfigurationChanged) +{ + /* Setup CDC Notification, Rx and Tx Endpoints */ + Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, + ENDPOINT_DIR_IN, CDC_NOTIFICATION_EPSIZE, + ENDPOINT_BANK_SINGLE); + + Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK, + ENDPOINT_DIR_IN, CDC_TXRX_EPSIZE, + ENDPOINT_BANK_SINGLE); + + Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK, + ENDPOINT_DIR_OUT, CDC_TXRX_EPSIZE, + ENDPOINT_BANK_SINGLE); + + /* Indicate USB connected and ready */ + UpdateStatus(Status_USBReady); + + /* Start CDC task */ + Scheduler_SetTaskMode(CDC_Task, TASK_RUN); +} + +/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific + * control requests that are not handled internally by the USB library (including the CDC control commands, + * which are all issued via the control endpoint), so that they can be handled appropriately for the application. + */ +EVENT_HANDLER(USB_UnhandledControlPacket) +{ + uint8_t* LineCodingData = (uint8_t*)&LineCoding; + + /* Process CDC specific control requests */ + switch (bRequest) + { + case REQ_GetLineEncoding: + if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + { + /* Acknowedge the SETUP packet, ready for data transfer */ + Endpoint_ClearSetupReceived(); + + /* Write the line coding data to the control endpoint */ + Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t)); + + /* Finalize the stream transfer to send the last packet or clear the host abort */ + Endpoint_ClearSetupOUT(); + } + + break; + case REQ_SetLineEncoding: + if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + { + /* Acknowedge the SETUP packet, ready for data transfer */ + Endpoint_ClearSetupReceived(); + + /* Read the line coding data in from the host into the global struct */ + Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t)); + + /* Finalize the stream transfer to clear the last packet from the host */ + Endpoint_ClearSetupIN(); + } + + break; + case REQ_SetControlLineState: + if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + { +#if 0 + /* NOTE: Here you can read in the line state mask from the host, to get the current state of the output handshake + lines. The mask is read in from the wValue parameter, and can be masked against the CONTROL_LINE_OUT_* masks + to determine the RTS and DTR line states using the following code: + */ + + uint16_t wIndex = Endpoint_Read_Word_LE(); + + // Do something with the given line states in wIndex +#endif + + /* Acknowedge the SETUP packet, ready for data transfer */ + Endpoint_ClearSetupReceived(); + + /* Send an empty packet to acknowedge the command */ + Endpoint_ClearSetupIN(); + } + + break; + } +} + +/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to + * log to a serial port, or anything else that is suitable for status updates. + * + * \param CurrentStatus Current status of the system, from the CDC_StatusCodes_t enum + */ +void UpdateStatus(uint8_t CurrentStatus) +{ + uint8_t LEDMask = LEDS_NO_LEDS; + + /* Set the LED mask to the appropriate LED mask based on the given status code */ + switch (CurrentStatus) + { + case Status_USBNotReady: + LEDMask = (LEDS_LED1); + break; + case Status_USBEnumerating: + LEDMask = (LEDS_LED1 | LEDS_LED2); + break; + case Status_USBReady: + LEDMask = (LEDS_LED2 | LEDS_LED4); + break; + } + + /* Set the board LEDs to the new LED mask */ + LEDs_SetAllLEDs(LEDMask); +} + +/** Function to manage CDC data transmission and reception to and from the host. */ +TASK(CDC_Task) +{ + char* ReportString = NULL; + uint8_t JoyStatus_LCL = Joystick_GetStatus(); + static bool ActionSent = false; + +#if 0 + /* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232 + handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code: + */ + USB_Notification_Header_t Notification = (USB_Notification_Header_t) + { + NotificationType: (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE), + Notification: NOTIF_SerialState, + wValue: 0, + wIndex: 0, + wLength: sizeof(uint16_t), + }; + + uint16_t LineStateMask; + + // Set LineStateMask here to a mask of CONTROL_LINE_IN_* masks to set the input handshake line states to send to the host + + Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPNUM); + Endpoint_Write_Stream_LE(&Notification, sizeof(Notification)); + Endpoint_Write_Stream_LE(&LineStateMask, sizeof(LineStateMask)); + Endpoint_ClearCurrentBank(); +#endif + + /* Determine if a joystick action has occurred */ + if (JoyStatus_LCL & JOY_UP) + ReportString = JoystickUpString; + else if (JoyStatus_LCL & JOY_DOWN) + ReportString = JoystickDownString; + else if (JoyStatus_LCL & JOY_LEFT) + ReportString = JoystickLeftString; + else if (JoyStatus_LCL & JOY_RIGHT) + ReportString = JoystickRightString; + else if (JoyStatus_LCL & JOY_PRESS) + ReportString = JoystickPressedString; + + /* Flag management - Only allow one string to be sent per action */ + if (ReportString == NULL) + { + ActionSent = false; + } + else if (ActionSent == false) + { + ActionSent = true; + + /* Select the Serial Tx Endpoint */ + Endpoint_SelectEndpoint(CDC_TX_EPNUM); + + /* Write the String to the Endpoint */ + Endpoint_Write_Stream_LE(ReportString, strlen(ReportString)); + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearCurrentBank(); + } + + /* Select the Serial Rx Endpoint */ + Endpoint_SelectEndpoint(CDC_RX_EPNUM); + + /* Throw away any received data from the host */ + if (Endpoint_ReadWriteAllowed()) + Endpoint_ClearCurrentBank(); +} -- cgit v1.2.3