summaryrefslogtreecommitdiffhomepage
path: root/digital/dev2
diff options
context:
space:
mode:
Diffstat (limited to 'digital/dev2')
-rw-r--r--digital/dev2/doc/dev2.txt6
-rw-r--r--digital/dev2/src/usb_gpio/descriptors.c6
-rw-r--r--digital/dev2/src/usb_serial_isp/descriptors.c6
-rw-r--r--digital/dev2/src/usb_twi/descriptors.c6
-rwxr-xr-xdigital/dev2/tools/dev2ctl.py2
5 files changed, 13 insertions, 13 deletions
diff --git a/digital/dev2/doc/dev2.txt b/digital/dev2/doc/dev2.txt
index 2eed3b3d..9d499172 100644
--- a/digital/dev2/doc/dev2.txt
+++ b/digital/dev2/doc/dev2.txt
@@ -9,7 +9,7 @@ As there is no driver for the dev2 board in the kernel and there is not enough
USB end points in the AT90USB162 to implement a ACM class device with two
serial ports, you should load the generic serial driver:
- modprobe usbserial vendor=0x03eb product=0x204e
+ modprobe usbserial vendor=0x1d50 product=0x6052
Then look at kernel messages to locate the new serial devices (/dev/ttyUSBx).
@@ -19,9 +19,9 @@ be detected.
To let udev do this automatically for you, you can add this to the file
`/etc/udev/rules.d/70-apbteam.rules`:
- SUBSYSTEM=="usb", ACTION=="add", ATTR{idVendor}=="03eb", ATTR{idProduct}=="204e", \
+ SUBSYSTEM=="usb", ACTION=="add", ATTR{idVendor}=="1d50", ATTR{idProduct}=="6052", \
ATTR{manufacturer}=="APBTeam", MODE="0660", GROUP="plugdev", \
- RUN+="/sbin/modprobe usbserial vendor=0x03eb product=0x204e"
+ RUN+="/sbin/modprobe usbserial vendor=0x1d50 product=0x6052"
This will also automatically authorize the `plugdev` group to use the device
without root access.
diff --git a/digital/dev2/src/usb_gpio/descriptors.c b/digital/dev2/src/usb_gpio/descriptors.c
index d2046b3d..f8e6c58d 100644
--- a/digital/dev2/src/usb_gpio/descriptors.c
+++ b/digital/dev2/src/usb_gpio/descriptors.c
@@ -47,9 +47,9 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
SubClass: 0x00,
Protocol: 0x00,
Endpoint0Size: 8,
- /* Taken from LUFA IDs. */
- VendorID: 0x03EB,
- ProductID: 0x204E,
+ /* Theses are APBTeam IDs, given by Openmoko! */
+ VendorID: 0x1d50,
+ ProductID: 0x6052,
ReleaseNumber: 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
diff --git a/digital/dev2/src/usb_serial_isp/descriptors.c b/digital/dev2/src/usb_serial_isp/descriptors.c
index 684b1004..b1f52566 100644
--- a/digital/dev2/src/usb_serial_isp/descriptors.c
+++ b/digital/dev2/src/usb_serial_isp/descriptors.c
@@ -50,9 +50,9 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
SubClass: 0x00,
Protocol: 0x00,
Endpoint0Size: 8,
- /* Taken from LUFA IDs. */
- VendorID: 0x03EB,
- ProductID: 0x204E,
+ /* Theses are APBTeam IDs, given by Openmoko! */
+ VendorID: 0x1d50,
+ ProductID: 0x6052,
ReleaseNumber: 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
diff --git a/digital/dev2/src/usb_twi/descriptors.c b/digital/dev2/src/usb_twi/descriptors.c
index 728184f6..90e17a93 100644
--- a/digital/dev2/src/usb_twi/descriptors.c
+++ b/digital/dev2/src/usb_twi/descriptors.c
@@ -47,9 +47,9 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
SubClass: 0x00,
Protocol: 0x00,
Endpoint0Size: 8,
- /* Taken from LUFA IDs. */
- VendorID: 0x03EB,
- ProductID: 0x204E,
+ /* Theses are APBTeam IDs, given by Openmoko! */
+ VendorID: 0x1d50,
+ ProductID: 0x6052,
ReleaseNumber: 0x0000,
ManufacturerStrIndex: 0x01,
ProductStrIndex: 0x02,
diff --git a/digital/dev2/tools/dev2ctl.py b/digital/dev2/tools/dev2ctl.py
index 3cbe4d20..aa69832a 100755
--- a/digital/dev2/tools/dev2ctl.py
+++ b/digital/dev2/tools/dev2ctl.py
@@ -57,7 +57,7 @@ if options.gpio is not None and (options.gpio[0] < 0 or options.gpio[0] > 0xff
d = None
for bus in usb.busses ():
for dev in bus.devices:
- if dev.idVendor == 0x03eb and dev.idProduct == 0x204e:
+ if dev.idVendor == 0x1d50 and dev.idProduct == 0x6052:
d = dev.open ()
if d is None:
print >> sys.stderr, 'device not found'