|author||Jérémy Dufour||2008-03-02 11:25:19 +0100|
|committer||Jérémy Dufour||2008-03-02 11:25:19 +0100|
- add a quick documentation to use the development card.
Diffstat (limited to 'digital/dev')
1 files changed, 64 insertions, 0 deletions
diff --git a/digital/dev/doc/usage.txt b/digital/dev/doc/usage.txt
new file mode 100644
@@ -0,0 +1,64 @@
+How to use the development card
+The development card is use to power, program and communicate with others
+card. It has two working modes:
+ it is used to program the AVR on the card link to it;
+ it is used to communicate with the AVR on the card link to it.
+How to use it?
+You need to install:
+ * avrdude (at least version 5.5);
+ * usbprog.
+The voodoo ceremonial
+As ``usbprog`` is quite buggy (no error checks), here is the best working
+procedures we have found:
+ #. power up the development card using the external power;
+ #. power up your card using the power provided by the development card;
+ #. plug the USB cable to your computer. You should see ``atmel`` in the
+ output of ``sudo lsusb``;
+ #. plug the dev cable to the card you want to program.
+ #. use ``avrdude`` to program your card, with something like:
+ ``avrdude -p m128 -c avrispv2 -P usb -U flash:w:your_program.hex``
+ If it does not work, just remove the serial and USB cable and try again the
+ #. remove the serial cable from the card.
+ #. remove the USB cable from your computer and plug it back in.
+ #. launch ``usbprog`` to put the development card in serial mode:
+ ``sudo usbprog device 0 upload blinkdemo devices``. It should failed with
+ something like *Unable to find update device (2).* but that's normal. You
+ should see in the kernel message something like:
+ *cdc_acm 2-2:1.0: ttyACM0: USB ACM device*.
+ #. plug the dev cable.
+ #. launch ``minicom`` in */dev/ttyACM0 8N1* mode.