From d55a705bbb362934306a3be632d6bacb99fd9de2 Mon Sep 17 00:00:00 2001 From: IBNobody Date: Sat, 3 Sep 2016 23:21:24 -0500 Subject: Moved breathing backlighting section in readme.md --- readme.md | 120 +++++++++++++++++++++++++++++++------------------------------- 1 file changed, 60 insertions(+), 60 deletions(-) (limited to 'readme.md') diff --git a/readme.md b/readme.md index 903c2b1e8..7ee3b28d4 100644 --- a/readme.md +++ b/readme.md @@ -877,6 +877,66 @@ In `quantum/keymap_extras/`, you'll see various language files - these work the You can currently send 4 hex digits with your OS-specific modifier key (RALT for OSX with the "Unicode Hex Input" layout) - this is currently limited to supporting one OS at a time, and requires a recompile for switching. 8 digit hex codes are being worked on. The keycode function is `UC(n)`, where *n* is a 4 digit hexidecimal. Enable from the Makefile. +## Backlight Breathing + +In order to enable backlight breathing, the following line must be added to your config.h file. + + #define BACKLIGHT_BREATHING + +The following function calls are used to control the breathing effect. + +* ```breathing_enable()``` - Enable the free-running breathing effect. +* ```breathing_disable()``` - Disable the free-running breathing effect immediately. +* ```breathing_self_disable()``` - Disable the free-running breathing effect after the current effect ends. +* ```breathing_toggle()``` - Toggle the free-running breathing effect. +* ```breathing_defaults()``` - Reset the speed and brightness settings of the breathing effect. + +The following function calls are used to control the maximum brightness of the breathing effect. + +* ```breathing_intensity_set(value)``` - Set the brightness of the breathing effect when it is at its max value. +* ```breathing_intensity_default()``` - Reset the brightness of the breathing effect to the default value based on the current backlight intensity. + +The following function calls are used to control the cycling speed of the breathing effect. + +* ```breathing_speed_set(value)``` - Set the speed of the breathing effect - how fast it cycles. +* ```breathing_speed_inc(value)``` - Increase the speed of the breathing effect by a fixed value. +* ```breathing_speed_dec(value)``` - Decrease the speed of the breathing effect by a fixed value. +* ```breathing_speed_default()``` - Reset the speed of the breathing effect to the default value. + +The following example shows how to enable the backlight breathing effect when the FUNCTION layer macro button is pressed: + + case MACRO_FUNCTION: + if (record->event.pressed) + { + breathing_speed_set(3); + breathing_enable(); + layer_on(LAYER_FUNCTION); + } + else + { + breathing_speed_set(1); + breathing_self_disable(); + layer_off(LAYER_FUNCTION); + } + break; + +The following example shows how to pulse the backlight on-off-on when the RAISED layer macro button is pressed: + + case MACRO_RAISED: + if (record->event.pressed) + { + layer_on(LAYER_RAISED); + breathing_speed_set(2); + breathing_pulse(); + update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST); + } + else + { + layer_off(LAYER_RAISED); + update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST); + } + break; + ## Other firmware shortcut keycodes * `RESET` - puts the MCU in DFU mode for flashing new firmware (with `make dfu`) @@ -1030,66 +1090,6 @@ In the default script of AutoHotkey you can define custom hotkeys. The hotkeys above are for the combination CtrlAltGui and CtrlAltGuiShift plus the letter a. AutoHotkey inserts the Text right of `Send, ` when this combination is pressed. -## Backlight Breathing - -In order to enable backlight breathing, the following line must be added to your config.h file. - - #define BACKLIGHT_BREATHING - -The following function calls are used to control the breathing effect. - -* ```breathing_enable()``` - Enable the free-running breathing effect. -* ```breathing_disable()``` - Disable the free-running breathing effect immediately. -* ```breathing_self_disable()``` - Disable the free-running breathing effect after the current effect ends. -* ```breathing_toggle()``` - Toggle the free-running breathing effect. -* ```breathing_defaults()``` - Reset the speed and brightness settings of the breathing effect. - -The following function calls are used to control the maximum brightness of the breathing effect. - -* ```breathing_intensity_set(value)``` - Set the brightness of the breathing effect when it is at its max value. -* ```breathing_intensity_default()``` - Reset the brightness of the breathing effect to the default value based on the current backlight intensity. - -The following function calls are used to control the cycling speed of the breathing effect. - -* ```breathing_speed_set(value)``` - Set the speed of the breathing effect - how fast it cycles. -* ```breathing_speed_inc(value)``` - Increase the speed of the breathing effect by a fixed value. -* ```breathing_speed_dec(value)``` - Decrease the speed of the breathing effect by a fixed value. -* ```breathing_speed_default()``` - Reset the speed of the breathing effect to the default value. - -The following example shows how to enable the backlight breathing effect when the FUNCTION layer macro button is pressed: - - case MACRO_FUNCTION: - if (record->event.pressed) - { - breathing_speed_set(3); - breathing_enable(); - layer_on(LAYER_FUNCTION); - } - else - { - breathing_speed_set(1); - breathing_self_disable(); - layer_off(LAYER_FUNCTION); - } - break; - -The following example shows how to pulse the backlight on-off-on when the RAISED layer macro button is pressed: - - case MACRO_RAISED: - if (record->event.pressed) - { - layer_on(LAYER_RAISED); - breathing_speed_set(2); - breathing_pulse(); - update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST); - } - else - { - layer_off(LAYER_RAISED); - update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST); - } - break; - ## RGB Under Glow Mod ![Planck with RGB Underglow](https://raw.githubusercontent.com/jackhumbert/qmk_firmware/master/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg) -- cgit v1.2.3