summaryrefslogtreecommitdiff
path: root/lib/lufa/LUFA/Build/DMBS/DMBS/dfu.md
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/LUFA/Build/DMBS/DMBS/dfu.md')
-rw-r--r--lib/lufa/LUFA/Build/DMBS/DMBS/dfu.md122
1 files changed, 122 insertions, 0 deletions
diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/dfu.md b/lib/lufa/LUFA/Build/DMBS/DMBS/dfu.md
new file mode 100644
index 000000000..456bbf6f5
--- /dev/null
+++ b/lib/lufa/LUFA/Build/DMBS/DMBS/dfu.md
@@ -0,0 +1,122 @@
+DMBS - Dean's Makefile Build System
+===================================
+
+
+Module: DFU
+-----------------
+
+The DFU module provides build targets to program a USB connected target running
+a DFU class bootloader, via the official Atmel FLIP utility running via the
+command line, or the open source `DFU-Programmer` tool.
+
+## Importing This Module into a Makefile:
+
+To use this module in your application makefile, add the following code to your
+makefile:
+
+ include $(DMBS_PATH)/dfu.mk
+
+## Prerequisites:
+
+This module requires the `batchisp` utility to be available in your system's
+`PATH` variable. The `batchisp` utility is distributed as part of Atmel's FLIP
+software which can be downloaded from the [official site](http://www.atmel.com).
+
+This module requires the `dfu-programmer` utility to be available in your
+system's `PATH` variable. The `dfu-programmer` utility is distributed from the
+[official project site](https://dfu-programmer.github.io/).
+
+## Build Targets:
+
+The following targets are supported by this module:
+
+<table>
+ <tbody>
+ <tr>
+ <td>flip</td>
+ <td>Program the application into the device's flash memory, using Atmel FLIP.</td>
+ </tr>
+ <tr>
+ <td>flip-ee</td>
+ <td>Program the application's EEPROM data into the device's EEPROM memory, using Atmel FLIP.</td>
+ </tr>
+ <tr>
+ <td>dfu</td>
+ <td>Program the application into the device's flash memory, using `dfu-programmer`.</td>
+ </tr>
+ <tr>
+ <td>dfu-ee</td>
+ <td>Program the application's EEPROM data into the device's EEPROM memory, using `dfu-programmer`.</td>
+ </tr>
+ </tbody>
+</table>
+
+## Mandatory Variables:
+
+The following variables must be defined (with a `NAME = VALUE` syntax, one
+variable per line) in the user makefile to be able to use this module:
+
+<table>
+ <tbody>
+ <tr>
+ <td>MCU</td>
+ <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td>
+ </tr>
+ <tr>
+ <td>TARGET</td>
+ <td>Name of the application output file prefix (e.g. `TestApplication`).</td>
+ </tr>
+ </tbody>
+</table>
+
+## Optional Variables:
+
+The following variables may be defined (with a `NAME = VALUE` syntax, one
+variable per line) in the user makefile. If not specified, a default value will
+be assumed.
+
+<table>
+ <tbody>
+ <tr>
+ <td>N/A</td>
+ <td>This module has no optional variables.</td>
+ </tr>
+ </tbody>
+</table>
+
+## Provided Variables:
+
+The following variables may be referenced in a user makefile (via `$(NAME)`
+syntax) if desired, as they are provided by this module.
+
+<table>
+ <tbody>
+ <tr>
+ <td>N/A</td>
+ <td>This module provides no variables.</td>
+ </tr>
+ </tbody>
+</table>
+
+## Provided Macros:
+
+The following macros may be referenced in a user makefile (via
+`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by
+this module.
+
+<table>
+ <tbody>
+ <tr>
+ <td>N/A</td>
+ <td>This module provides no macros.</td>
+ </tr>
+ </tbody>
+</table>
+
+## Module Changelog:
+
+The changes to this module since its initial release are listed below, as of the
+DMBS version where the change was made.
+
+### 20160403
+Initial release.