aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32/f1/stm32-h103/button/button.c
blob: 927dd7156c519efa82759ae5bbad873cd6a4636d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
/*
 * This file is part of the libopencm3 project.
 *
 * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>,
 * Copyright (C) 2010 Piotr Esden-Tempski <piotr@esden.net>
 *
 * This library is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this library.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/cm3/nvic.h>
#include <libopencm3/stm32/exti.h>

u16 exti_line_state;

/* Set STM32 to 72 MHz. */
static void clock_setup(void)
{
	rcc_clock_setup_in_hse_8mhz_out_72mhz();
}

static void gpio_setup(void)
{
	/* Enable GPIOC clock. */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);

	/* Set GPIO12 (in GPIO port C) to 'output push-pull'. */
	gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ,
		      GPIO_CNF_OUTPUT_PUSHPULL, GPIO12);
}

static void button_setup(void)
{
	/* Enable GPIOA clock. */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);

	/* Set GPIO0 (in GPIO port A) to 'input open-drain'. */
	gpio_set_mode(GPIOA, GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT, GPIO0);
}

int main(void)
{
	int i;

	clock_setup();
	gpio_setup();
	button_setup();

	/* Blink the LED (PC12) on the board. */
	while (1) {
		gpio_toggle(GPIOC, GPIO12);

		exti_line_state = GPIOA_IDR;
		if ((exti_line_state & (1 << 0)) != 0) {
			for (i = 0; i < 800000; i++)	/* Wait a bit. */
				__asm__("nop");
		}

		for (i = 0; i < 800000; i++)	/* Wait a bit. */
			__asm__("nop");
	}

	return 0;
}