aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32/f1/obldc/can/can.c
blob: d26be5087a905d0a26368ec60f711b0abf3bc036 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
/*
 * This file is part of the libopencm3 project.
 *
 * Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
 * Copyright (C) 2010 Piotr Esden-Tempski <piotr@esden.net>
 *
 * This library is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this library.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/flash.h>
#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/stm32/nvic.h>
#include <libopencm3/stm32/systick.h>
#include <libopencm3/stm32/can.h>

struct can_tx_msg {
	u32 std_id;
	u32 ext_id;
	u8 ide;
	u8 rtr;
	u8 dlc;
	u8 data[8];
};

struct can_rx_msg {
	u32 std_id;
	u32 ext_id;
	u8 ide;
	u8 rtr;
	u8 dlc;
	u8 data[8];
	u8 fmi;
};

struct can_tx_msg can_tx_msg;
struct can_rx_msg can_rx_msg;

void gpio_setup(void)
{
	/* Enable GPIOA clock. */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);

	/* Enable GPIOB clock. */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN);

	gpio_set(GPIOA, GPIO6); /* LED0 off */
	gpio_set(GPIOA, GPIO7); /* LED1 off */
	gpio_set(GPIOB, GPIO0); /* LED2 off */
	gpio_set(GPIOB, GPIO1); /* LED3 off */

	/* Set GPIO6/7 (in GPIO port A) to 'output push-pull' for the LEDs. */
	gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
		      GPIO_CNF_OUTPUT_PUSHPULL, GPIO6);
	gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
		      GPIO_CNF_OUTPUT_PUSHPULL, GPIO7);

	/* Set GPIO0/1 (in GPIO port B) to 'output push-pull' for the LEDs. */
	gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ,
		      GPIO_CNF_OUTPUT_PUSHPULL, GPIO0);
	gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ,
		      GPIO_CNF_OUTPUT_PUSHPULL, GPIO1);
}

void systick_setup(void)
{
	/* 72MHz / 8 => 9000000 counts per second */
	systick_set_clocksource(STK_CTRL_CLKSOURCE_AHB_DIV8);

	/* 9000000/9000 = 1000 overflows per second - every 1ms one interrupt */
	systick_set_reload(9000);

	systick_interrupt_enable();

	/* Start counting. */
	systick_counter_enable();
}

void can_setup(void)
{
	/* Enable peripheral clocks. */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN);
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
	rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_CANEN);

	/* Configure CAN pin: RX (input pull-up). */
	gpio_set_mode(GPIOA, GPIO_MODE_INPUT,
		      GPIO_CNF_INPUT_PULL_UPDOWN, GPIO_CAN_RX);
	gpio_set(GPIOA, GPIO_CAN_RX);

	/* Configure CAN pin: TX. */
	gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
		      GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_CAN_TX);

	/* NVIC setup. */
	nvic_enable_irq(NVIC_USB_LP_CAN_RX0_IRQ);
	nvic_set_priority(NVIC_USB_LP_CAN_RX0_IRQ, 1);

	/* Reset CAN. */
	can_reset(CAN1);

	/* CAN cell init. */
	if (can_init(CAN1,
		     false,           /* TTCM: Time triggered comm mode? */
		     true,            /* ABOM: Automatic bus-off management? */
		     false,           /* AWUM: Automatic wakeup mode? */
		     false,           /* NART: No automatic retransmission? */
		     false,           /* RFLM: Receive FIFO locked mode? */
		     false,           /* TXFP: Transmit FIFO priority? */
		     CAN_BTR_SJW_1TQ,
		     CAN_BTR_TS1_3TQ,
		     CAN_BTR_TS2_4TQ,
		     12))             /* BRP+1: Baud rate prescaler */
	{
		gpio_set(GPIOA, GPIO6);		/* LED0 off */
		gpio_set(GPIOA, GPIO7);		/* LED1 off */
		gpio_set(GPIOB, GPIO0);		/* LED2 off */
		gpio_clear(GPIOB, GPIO1);	/* LED3 on */

		/* Die because we failed to initialize. */
		while (1)
			__asm__("nop");
	}

	/* CAN filter 0 init. */
	can_filter_id_mask_32bit_init(CAN1,
				0,     /* Filter ID */
				0,     /* CAN ID */
				0,     /* CAN ID mask */
				0,     /* FIFO assignment (here: FIFO0) */
				true); /* Enable the filter. */

	/* Enable CAN RX interrupt. */
	can_enable_irq(CAN1, CAN_IER_FMPIE0);
}

void sys_tick_handler(void)
{
	static int temp32 = 0;
	static u8 data[8] = {0, 1, 2, 0, 0, 0, 0, 0};

	/* We call this handler every 1ms so 1000ms = 1s on/off. */
	if (++temp32 != 1000)
		return;

	temp32 = 0;

	/* Transmit CAN frame. */
	data[0]++;
	if (can_transmit(CAN1,
			 0,     /* (EX/ST)ID: CAN ID */
			 false, /* IDE: CAN ID extended? */
			 false, /* RTR: Request transmit? */
			 8,     /* DLC: Data length */
			 data) == -1)
	{
		gpio_set(GPIOA, GPIO6);		/* LED0 off */
		gpio_set(GPIOA, GPIO7);		/* LED1 off */
		gpio_clear(GPIOB, GPIO0);	/* LED2 on */
		gpio_set(GPIOB, GPIO1);		/* LED3 off */
	}
}

void usb_lp_can_rx0_isr(void)
{
	u32 id, fmi;
	bool ext, rtr;
	u8 length, data[8];

	can_receive(CAN1, 0, false, &id, &ext, &rtr, &fmi, &length, data);

	if (data[0] & 1)
		gpio_clear(GPIOA, GPIO6);
	else
		gpio_set(GPIOA, GPIO6);

	if (data[0] & 2)
		gpio_clear(GPIOA, GPIO7);
	else
		gpio_set(GPIOA, GPIO7);

	if (data[0] & 4)
		gpio_clear(GPIOB, GPIO0);
	else
		gpio_set(GPIOB, GPIO0);

	if (data[0] & 8)
		gpio_clear(GPIOB, GPIO1);
	else
		gpio_set(GPIOB, GPIO1);

	can_fifo_release(CAN1, 0);
}

int main(void)
{
	rcc_clock_setup_in_hse_8mhz_out_72mhz();
	gpio_setup();
	can_setup();
	systick_setup();

	while (1); /* Halt. */

	return 0;
}