aboutsummaryrefslogtreecommitdiff
path: root/examples/stm32/f1/lisa-m-1/fancyblink/fancyblink.c
blob: 3e2577d41b11605e791eeed995eb4242eb25bfa8 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
/*
 * This file is part of the libopencm3 project.
 *
 * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
 * Copyright (C) 2011 Piotr Esden-Tempski <piotr@esden.net>
 *
 * This library is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this library.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <libopencm3/stm32/f1/rcc.h>
#include <libopencm3/stm32/f1/gpio.h>

/* Set STM32 to 72 MHz. */
void clock_setup(void)
{
	rcc_clock_setup_in_hse_12mhz_out_72mhz();

	/* Enable GPIOB, GPIOC, and AFIO clocks. */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN);
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN);
}

void gpio_setup(void)
{
	/* Set GPIO13 (in GPIO port C) to 'output push-pull'. */
	gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ,
		      GPIO_CNF_OUTPUT_PUSHPULL, GPIO13);

	/* Set GPIO4 (in GPIO port B) to 'output push-pull'. */
	gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ,
		      GPIO_CNF_OUTPUT_PUSHPULL, GPIO4);

	AFIO_MAPR |= AFIO_MAPR_SWJ_CFG_FULL_SWJ_NO_JNTRST;

	/* Preconfigure the LEDs. */
	gpio_set(GPIOB, GPIO4);	/* Switch off LED. */
	gpio_clear(GPIOC, GPIO13);	/* Switch on LED. */
}

int main(void)
{
	int i;

	clock_setup();
	gpio_setup();

	/* Blink the LEDs (PC13 and PB4) on the board. */
	while (1) {
		gpio_toggle(GPIOC, GPIO13);	/* LED on/off */
		gpio_toggle(GPIOB, GPIO4);	/* LED on/off */
		for (i = 0; i < 800000; i++)	/* Wait a bit. */
			__asm__("nop");
	}

	return 0;
}