/* * This file is part of the libopencm3 project. * * Copyright (C) 2009 Uwe Hermann * Copyright (C) 2011 Stephen Caudle * Copyright (C) 2012 Karl Palsson * * This library is free software: you can redistribute it and/or modify * it under the terms of the GNU Lesser General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public License * along with this library. If not, see . */ #include #include #define PORT_LED GPIOB #define PIN_LED GPIO6 void gpio_setup(void) { /* Enable GPIOB clock. */ /* Manually: */ //RCC_AHBENR |= RCC_AHBENR_GPIOBEN; /* Using API functions: */ rcc_peripheral_enable_clock(&RCC_AHBENR, RCC_AHBENR_GPIOBEN); /* Set GPIO6 (in GPIO port B) to 'output push-pull'. */ /* Using API functions: */ gpio_mode_setup(PORT_LED, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, PIN_LED); } int main(void) { int i; gpio_setup(); /* Blink the LED (PC8) on the board. */ while (1) { /* Manually: */ // GPIOD_BSRR = GPIO12; /* LED off */ // for (i = 0; i < 1000000; i++) /* Wait a bit. */ // __asm__("nop"); // GPIOD_BRR = GPIO12; /* LED on */ // for (i = 0; i < 1000000; i++) /* Wait a bit. */ // __asm__("nop"); /* Using API functions gpio_set()/gpio_clear(): */ // gpio_set(GPIOD, GPIO12); /* LED off */ // for (i = 0; i < 1000000; i++) /* Wait a bit. */ // __asm__("nop"); // gpio_clear(GPIOD, GPIO12); /* LED on */ // for (i = 0; i < 1000000; i++) /* Wait a bit. */ // __asm__("nop"); /* Using API function gpio_toggle(): */ gpio_toggle(PORT_LED, PIN_LED); /* LED on/off */ for (i = 0; i < 1000000; i++) /* Wait a bit. */ __asm__("nop"); } return 0; }