aboutsummaryrefslogtreecommitdiff
path: root/lib/stm32/f4/exti.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/stm32/f4/exti.c')
-rw-r--r--lib/stm32/f4/exti.c146
1 files changed, 0 insertions, 146 deletions
diff --git a/lib/stm32/f4/exti.c b/lib/stm32/f4/exti.c
deleted file mode 100644
index 155c21f..0000000
--- a/lib/stm32/f4/exti.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * This file is part of the libopencm3 project.
- *
- * Copyright (C) 2010 Mark Butler <mbutler@physics.otago.ac.nz>
- *
- * This library is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this library. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <libopencm3/stm32/exti.h>
-#include <libopencm3/stm32/f4/syscfg.h>
-#include <libopencm3/stm32/f4/gpio.h>
-
-void exti_set_trigger(u32 extis, exti_trigger_type trig)
-{
- switch (trig) {
- case EXTI_TRIGGER_RISING:
- EXTI_RTSR |= extis;
- EXTI_FTSR &= ~extis;
- break;
- case EXTI_TRIGGER_FALLING:
- EXTI_RTSR &= ~extis;
- EXTI_FTSR |= extis;
- break;
- case EXTI_TRIGGER_BOTH:
- EXTI_RTSR |= extis;
- EXTI_FTSR |= extis;
- break;
- }
-}
-
-void exti_enable_request(u32 extis)
-{
- /* Enable interrupts. */
- EXTI_IMR |= extis;
-
- /* Enable events. */
- EXTI_EMR |= extis;
-}
-
-void exti_disable_request(u32 extis)
-{
- /* Disable interrupts. */
- EXTI_IMR &= ~extis;
-
- /* Disable events. */
- EXTI_EMR &= ~extis;
-}
-
-/*
- * Reset the interrupt request by writing a 1 to the corresponding
- * pending bit register.
- */
-void exti_reset_request(u32 extis)
-{
- EXTI_PR = extis;
-}
-
-/*
- * Remap an external interrupt line to the corresponding pin on the
- * specified GPIO port.
- *
- * TODO: This could be rewritten in fewer lines of code.
- */
-void exti_select_source(u32 exti, u32 gpioport)
-{
- u8 shift, bits;
-
- shift = bits = 0;
-
- switch (exti) {
- case EXTI0:
- case EXTI4:
- case EXTI8:
- case EXTI12:
- shift = 0;
- break;
- case EXTI1:
- case EXTI5:
- case EXTI9:
- case EXTI13:
- shift = 4;
- break;
- case EXTI2:
- case EXTI6:
- case EXTI10:
- case EXTI14:
- shift = 8;
- break;
- case EXTI3:
- case EXTI7:
- case EXTI11:
- case EXTI15:
- shift = 12;
- break;
- }
-
- switch (gpioport) {
- case GPIOA:
- bits = 0xf;
- break;
- case GPIOB:
- bits = 0xe;
- break;
- case GPIOC:
- bits = 0xd;
- break;
- case GPIOD:
- bits = 0xc;
- break;
- case GPIOE:
- bits = 0xb;
- break;
- case GPIOF:
- bits = 0xa;
- break;
- case GPIOG:
- bits = 0x9;
- break;
- }
-
- /* Ensure that only valid EXTI lines are used. */
- if (exti < EXTI4) {
- SYSCFG_EXTICR1 &= ~(0x000F << shift);
- SYSCFG_EXTICR1 |= (~bits << shift);
- } else if (exti < EXTI8) {
- SYSCFG_EXTICR2 &= ~(0x000F << shift);
- SYSCFG_EXTICR2 |= (~bits << shift);
- } else if (exti < EXTI12) {
- SYSCFG_EXTICR3 &= ~(0x000F << shift);
- SYSCFG_EXTICR3 |= (~bits << shift);
- } else if (exti < EXTI16) {
- SYSCFG_EXTICR4 &= ~(0x000F << shift);
- SYSCFG_EXTICR4 |= (~bits << shift);
- }
-}