aboutsummaryrefslogtreecommitdiff
path: root/src/platforms/swlink/platform.h
blob: 469499f2cd90d7260276b77376f128de19a918dd (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
/*
 * This file is part of the Black Magic Debug project.
 *
 * Copyright (C) 2011  Black Sphere Technologies Ltd.
 * Written by Gareth McMullin <gareth@blacksphere.co.nz>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

/* This file implements the platform specific functions for the STM32
 * implementation.
 */
#ifndef __PLATFORM_H
#define __PLATFORM_H

#include <libopencm3/stm32/f1/gpio.h>
#include <libopencm3/usb/usbd.h>

#include <setjmp.h>
#include <alloca.h>

#include "gdb_packet.h"

#define INLINE_GPIO
#define CDCACM_PACKET_SIZE 	64
#define BOARD_IDENT             "Black Magic Probe (SWLINK), (Firmware 1.5" VERSION_SUFFIX ", build " BUILDDATE ")"
#define BOARD_IDENT_DFU		"Black Magic (Upgrade), STM8S Discovery, (Firmware 1.5" VERSION_SUFFIX ", build " BUILDDATE ")"
#define DFU_IDENT               "Black Magic Firmware Upgrade (SWLINK)"
#define DFU_IFACE_STRING	"@Internal Flash   /0x08000000/8*001Ka,56*001Kg"

extern usbd_device *usbdev;
#define CDCACM_GDB_ENDPOINT	1
#define CDCACM_UART_ENDPOINT	3

/* Pin mappings:
 *
 * nTRST = 	PB1
 * TDI = 	PA3
 * TMS = 	PA4 (input for SWDP)
 * TCK = 	PA5
 * TDO = 	PA6 (input)
 * nSRST = 	PA7 (input)
 *
 * USB cable pull-up: PA8
 * USB VBUS detect:  PB13 -- New on mini design.  
 *                           Enable pull up for compatibility.
 * Force DFU mode button: PB9 Low
 */

/* Hardware definitions... */
#define TMS_PORT	GPIOA
#define TCK_PORT	GPIOA
#define TDI_PORT	GPIOA
#define TDO_PORT	GPIOB
#define NRST_PORT	GPIOB
#define TMS_PIN		GPIO13
#define TCK_PIN		GPIO14
#define TDI_PIN		GPIO15
#define TDO_PIN		GPIO3
#define NRST_PIN	GPIO4

#define SWDIO_PORT 	TMS_PORT
#define SWCLK_PORT 	TCK_PORT
#define SWDIO_PIN	TMS_PIN
#define SWCLK_PIN	TCK_PIN

#define LED_PORT	GPIOA
/* Use PC14 for a "dummy" uart led. So we can observere at least with scope*/
#define LED_PORT_UART	GPIOC
#define LED_UART	GPIO14

#define TMS_SET_MODE()                                          \
    gpio_set_mode(TMS_PORT, GPIO_MODE_OUTPUT_50_MHZ,            \
                  GPIO_CNF_OUTPUT_PUSHPULL, TMS_PIN);
#define SWDIO_MODE_FLOAT()                              \
    gpio_set_mode(SWDIO_PORT, GPIO_MODE_INPUT,          \
                  GPIO_CNF_INPUT_FLOAT, SWDIO_PIN);
#define SWDIO_MODE_DRIVE()                                              \
    gpio_set_mode(SWDIO_PORT, GPIO_MODE_OUTPUT_50_MHZ,                  \
                  GPIO_CNF_OUTPUT_PUSHPULL, SWDIO_PIN);

#define UART_PIN_SETUP()     do                                         \
    {                                                                   \
        AFIO_MAPR |= AFIO_MAPR_USART1_REMAP;                            \
        gpio_set_mode(USBUSART_PORT, GPIO_MODE_OUTPUT_2_MHZ,            \
                      GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, USBUSART_TX_PIN); \
    } while (0)

#define USB_DRIVER      stm32f103_usb_driver
#define USB_IRQ         NVIC_USB_LP_CAN_RX0_IRQ
#define USB_ISR          usb_lp_can_rx0_isr
/* Interrupt priorities.  Low numbers are high priority.
 * For now USART1 preempts USB which may spin while buffer is drained.
 * TIM2 is used for traceswo capture and must be highest priority.
 */
#define IRQ_PRI_USB		(2 << 4)
#define IRQ_PRI_USBUSART	(1 << 4)
#define IRQ_PRI_USB_VBUS	(14 << 4)
#define IRQ_PRI_TRACE		(0 << 4)

#define USBUSART USART1
#define USBUSART_CR1 USART1_CR1
#define USBUSART_IRQ NVIC_USART1_IRQ
#define USBUSART_APB_ENR RCC_APB2ENR
#define USBUSART_CLK_ENABLE  RCC_APB2ENR_USART1EN
#define USBUSART_PORT GPIOB
#define USBUSART_TX_PIN GPIO6
#define USBUSART_ISR usart1_isr

#define TRACE_TIM TIM2
#define TRACE_TIM_CLK_EN() rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_TIM2EN)
#define TRACE_IRQ   NVIC_TIM2_IRQ
#define TRACE_ISR   tim2_isr
#define TRACE_IC_IN TIM_IC_IN_TI2
#define TRACE_TRIG_IN TIM_SMCR_TS_IT1FP2

#define DEBUG(...)

extern uint8_t running_status;
extern volatile uint32_t timeout_counter;

extern jmp_buf fatal_error_jmpbuf;

extern const char *morse_msg;

#define gpio_set_val(port, pin, val) do {	\
	if(val)					\
		gpio_set((port), (pin));	\
	else					\
		gpio_clear((port), (pin));	\
} while(0)

#define led_idle_run GPIO8
#define SET_RUN_STATE(state)	{running_status = (state);}
#define SET_IDLE_STATE(state)	{gpio_set_val(LED_PORT, led_idle_run, state);}

#define PLATFORM_SET_FATAL_ERROR_RECOVERY()	{setjmp(fatal_error_jmpbuf);}
#define PLATFORM_FATAL_ERROR(error)	{ 		\
	if(running_status) gdb_putpacketz("X1D");	\
		else gdb_putpacketz("EFF");		\
	running_status = 0;				\
	target_list_free();				\
	longjmp(fatal_error_jmpbuf, (error));		\
}

int platform_init(void);
void morse(const char *msg, char repeat);
const char *platform_target_voltage(void);
void platform_delay(uint32_t delay);

/* <cdcacm.c> */
void cdcacm_init(void);
/* Returns current usb configuration, or 0 if not configured. */
int cdcacm_get_config(void);
int cdcacm_get_dtr(void);

/* <platform.h> */
void uart_usb_buf_drain(uint8_t ep);

/* Use newlib provided integer only stdio functions */
#define sscanf siscanf
#define sprintf siprintf
#define vasprintf vasiprintf

#ifdef INLINE_GPIO
static inline void _gpio_set(u32 gpioport, u16 gpios)
{
	GPIO_BSRR(gpioport) = gpios;
}
#define gpio_set _gpio_set

static inline void _gpio_clear(u32 gpioport, u16 gpios)
{
	GPIO_BRR(gpioport) = gpios;
}
#define gpio_clear _gpio_clear

static inline u16 _gpio_get(u32 gpioport, u16 gpios)
{
	return (u16)GPIO_IDR(gpioport) & gpios;
}
#define gpio_get _gpio_get
#endif

#endif

void disconnect_usb(void);
void assert_boot_pin(void);