aboutsummaryrefslogtreecommitdiff
path: root/src/platforms/stlink/platform.h
blob: 498e512da55bd2b22b88e1e3eaa14cb6361f7ae6 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
/*
 * This file is part of the Black Magic Debug project.
 *
 * Copyright (C) 2011  Black Sphere Technologies Ltd.
 * Written by Gareth McMullin <gareth@blacksphere.co.nz>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

/* This file implements the platform specific functions for the STM32
 * implementation.
 */
#ifndef __PLATFORM_H
#define __PLATFORM_H

#include "gpio.h"
#include "timing.h"
#include "version.h"

#include <libopencm3/cm3/common.h>
#include <libopencm3/stm32/f1/memorymap.h>
#include <libopencm3/usb/usbd.h>

#define BOARD_IDENT       "Black Magic Probe (STLINK), (Firmware " FIRMWARE_VERSION ")"
#define BOARD_IDENT_DFU   "Black Magic (Upgrade) for STLink/Discovery, (Firmware " FIRMWARE_VERSION ")"
#define BOARD_IDENT_UPD   "Black Magic (DFU Upgrade) for STLink/Discovery, (Firmware " FIRMWARE_VERSION ")"
#define DFU_IDENT         "Black Magic Firmware Upgrade (STLINK)"
#define DFU_IFACE_STRING  "@Internal Flash   /0x08000000/8*001Ka,56*001Kg"
#define UPD_IFACE_STRING  "@Internal Flash   /0x08000000/8*001Kg"

/* Important pin mappings for STM32 implementation:
 *
 * LED0 = 	PB2	(Yellow LED : Running)
 * LED1 = 	PB10	(Yellow LED : Idle)
 * LED2 = 	PB11	(Red LED    : Error)
 *
 * TPWR = 	RB0 (input) -- analogue on mini design ADC1, ch8
 * nTRST = 	PB1
 * SRST_OUT = 	PA2
 * TDI = 	PA3
 * TMS = 	PA4 (input for SWDP)
 * TCK = 	PA5
 * TDO = 	PA6 (input)
 * nSRST = 	PA7 (input)
 *
 * USB cable pull-up: PA8
 * USB VBUS detect:  PB13 -- New on mini design.
 *                           Enable pull up for compatibility.
 * Force DFU mode button: PB12
 */

/* Hardware definitions... */
#define TDI_PORT	GPIOA
#define TMS_PORT	GPIOB
#define TCK_PORT	GPIOA
#define TDO_PORT	GPIOA
#define TDI_PIN		GPIO7
#define TMS_PIN		GPIO14
#define TCK_PIN		GPIO5
#define TDO_PIN		GPIO6

#define SWDIO_PORT 	TMS_PORT
#define SWCLK_PORT 	TCK_PORT
#define SWDIO_PIN	TMS_PIN
#define SWCLK_PIN	TCK_PIN

#define SRST_PORT	GPIOB
#define SRST_PIN_V1	GPIO1
#define SRST_PIN_V2	GPIO0

#define LED_PORT	GPIOA
/* Use PC14 for a "dummy" uart led. So we can observere at least with scope*/
#define LED_PORT_UART	GPIOC
#define LED_UART	GPIO14

#define TMS_SET_MODE() \
	gpio_set_mode(TMS_PORT, GPIO_MODE_OUTPUT_50_MHZ, \
	              GPIO_CNF_OUTPUT_PUSHPULL, TMS_PIN);
#define SWDIO_MODE_FLOAT() \
	gpio_set_mode(SWDIO_PORT, GPIO_MODE_INPUT, \
	              GPIO_CNF_INPUT_FLOAT, SWDIO_PIN);
#define SWDIO_MODE_DRIVE() \
	gpio_set_mode(SWDIO_PORT, GPIO_MODE_OUTPUT_50_MHZ, \
	              GPIO_CNF_OUTPUT_PUSHPULL, SWDIO_PIN);

#define UART_PIN_SETUP() \
	gpio_set_mode(USBUSART_PORT, GPIO_MODE_OUTPUT_2_MHZ, \
	              GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, USBUSART_TX_PIN);

#define SRST_SET_VAL(x) \
	platform_srst_set_val(x)

#define USB_DRIVER      stm32f103_usb_driver
#define USB_IRQ	        NVIC_USB_LP_CAN_RX0_IRQ
#define USB_ISR	        usb_lp_can_rx0_isr
/* Interrupt priorities.  Low numbers are high priority.
 * For now USART2 preempts USB which may spin while buffer is drained.
 * TIM3 is used for traceswo capture and must be highest priority.
 */
#define IRQ_PRI_USB		(2 << 4)
#define IRQ_PRI_USBUSART	(1 << 4)
#define IRQ_PRI_USBUSART_TIM	(3 << 4)
#define IRQ_PRI_USB_VBUS	(14 << 4)
#define IRQ_PRI_TIM3		(0 << 4)

#define USBUSART USART2
#define USBUSART_CR1 USART2_CR1
#define USBUSART_IRQ NVIC_USART2_IRQ
#define USBUSART_CLK RCC_USART2
#define USBUSART_PORT GPIOA
#define USBUSART_TX_PIN GPIO2
#define USBUSART_ISR usart2_isr
#define USBUSART_TIM TIM4
#define USBUSART_TIM_CLK_EN() rcc_periph_clock_enable(RCC_TIM4)
#define USBUSART_TIM_IRQ NVIC_TIM4_IRQ
#define USBUSART_TIM_ISR tim4_isr

#define DEBUG(...)

extern uint16_t led_idle_run;
#define LED_IDLE_RUN            led_idle_run
#define SET_RUN_STATE(state)	{running_status = (state);}
#define SET_IDLE_STATE(state)	{gpio_set_val(LED_PORT, led_idle_run, state);}
#define SET_ERROR_STATE(x)

/* Use newlib provided integer only stdio functions */
#define sscanf siscanf
#define sprintf siprintf
#define vasprintf vasiprintf

#endif