aboutsummaryrefslogtreecommitdiff
path: root/src/platforms/native/usbdfu.c
blob: 35572a5c3d684529909c8e32f4b54e7460f5e31e (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
/*
 * This file is part of the Black Magic Debug project.
 *
 * Copyright (C) 2013 Gareth McMullin <gareth@blacksphere.co.nz>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <string.h>
#include <libopencm3/cm3/systick.h>
#include <libopencm3/stm32/rcc.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/cm3/scb.h>

#include "usbdfu.h"

void dfu_detach(void)
{
        /* USB device must detach, we just reset... */
	scb_reset_system();
}

int main(void)
{
	/* Check the force bootloader pin*/
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN);
	if(gpio_get(GPIOB, GPIO12))
		dfu_jump_app_if_valid();

	dfu_protect_enable();

	rcc_clock_setup_in_hse_8mhz_out_72mhz();
	systick_set_clocksource(STK_CTRL_CLKSOURCE_AHB_DIV8);
	systick_set_reload(900000);

	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
        rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USBEN);
	gpio_set_mode(GPIOA, GPIO_MODE_INPUT, 0, GPIO8);

	systick_interrupt_enable();
	systick_counter_enable();

	gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_2_MHZ,
			GPIO_CNF_OUTPUT_PUSHPULL, GPIO11);
	gpio_set_mode(GPIOB, GPIO_MODE_INPUT,
			GPIO_CNF_INPUT_FLOAT, GPIO2 | GPIO10);

	dfu_init(&stm32f103_usb_driver);

	gpio_set(GPIOA, GPIO8);
	gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ,
			GPIO_CNF_OUTPUT_PUSHPULL, GPIO8);

	dfu_main();
}

void sys_tick_handler(void)
{
	gpio_toggle(GPIOB, GPIO11); /* LED2 on/off */
}