<b>Thin Quad Flat Pack</b> >NAME >VALUE <b>Small Signal Transistors</b><p> Packages from :<br> www.infineon.com; <br> www.semiconductors.com;<br> www.irf.com<p> <author>Created by librarian@cadsoft.de</author> <b>SOT-23</b> >NAME >VALUE >NAME >VALUE <b>P-CHANNEL MOS FET</b> <h3>SparkFun Electronics' preferred foot prints</h3> We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com. <br><br> <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <b>CRYSTAL</b> >NAME >VALUE <b>CRYSTAL</b> >NAME >VALUE <b>CRYSTAL</b> >NAME >VALUE <b>CRYSTAL</b> >NAME >VALUE <B>CRYSTAL</B> >VALUE >NAME >Name >Value >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE >NAME >VALUE >NAME >VALUE >Name >Value + - S S >NAME >VALUE >NAME >VALUE Date: >LAST_DATE_TIME Sheet: >SHEET REV: TITLE: Document Number: >DRAWING_NAME >NAME >VALUE 1 2 >VALUE >NAME <b>Schematic Frame</b><p> Standard 8.5x11 US Letter frame <b>Crystals</b> Various standard crystals. Proven footprints. Spark Fun Electronics SKU : COM-00534 <b>Header 4</b> Standard 4-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 <h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> <p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> <h3>Obligatory Warning</h3> <p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> <h3>License</h3> <p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> <p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. </p> <p>2x05 1.27mm Headers SMT (2.0mm Height)</p> 4UConnector: 16846 >NAME >VALUE 10 Pin SWD Connector (Cortex M3) <p>Note: Small tRestrict polygon's were added to the ground pads to improve solderability when this part is used in combination with a ground pour. By default, Eagle will product four large bridges to the ground pour significantly increasing the heat distribution on the pads and preventing lead-free solder from reflowing in certain situations. For more details, see: http://www.microbuilder.eu/Blog/09-12-14/Reducing_Thermals_for_Large_Pads_in_Eagle.aspx</p> >NAME >VALUE 1 20 Pin JTAG Connector (ARM7, ARM9) >NAME 1 JTAG >VALUE Surface Mount USB Mini-B Connector >NAME >VALUE >NAME >VALUE >VALUE >NAME nRESET NC/TDI SWO/TDO SWDCLK/TCK SWDIO/TMS VCC GND GND KEY GNDDetect >VALUE >VALUE >NAME >VALUE >VALUE <b>GND</b> <p><b>Serial Wire (SW-DP) Connector</b></p> This standard 0.05" 10-pin connector is for use with the Cortex M0/M3's native SWD (serial wire debugger) interface (SW-DP). Some boards support a 20-pin combined JTAG+SWD connector (SWJ-DP), such as the LPC1700 family, but many smaller devices only work with SWD which typically use the smaller 10-pin SW-DP connecter (the LPC1300 family, for example, only supports SWD). <p><b>2x05 1.27mm/0.05" Connector:</b> This is the standard SMT connector defined by ARM for all Cortex devices, and should be used in most situations and for forward-compatibility since any new devices coming to market will likely use this connector.</p> <p><b>MOLEX 10 Pin 0.1" Connector:</b> This 0.1" 10 pin connector has the same pin layout as the standard 0.05" connector, but is easier to work with if you are using standard jumper wires or custom cables to connect your SWD hardware.</p> <p><b>MOLEX 20 Pin 0.1" Connector:</b> This 0.1" 20 pin connector is the same model used for ARM7/ARM9 JTAG debuggers, but is connected to match the pins on the Segger J-Link for ARM (which supports both JTAG and SWD debugging).</p> <p>See the following document from ARM for more information on Cortex M3 Debug Connectors: http://infocenter.arm.com/help/topic/com.arm.doc.faqs/attached/13634/cortex_debug_connectors.pdf<br/>And the following page for an overview with images of the different connector types: http://www.keil.com/peripherals/coresight/connectors.asp</p> <b>3.3V Supply</b> <p><b>USB Connectors</b></p> <b>USBMINIB</b> - Surface Mount Female Mini-B USB Connector <p>4UConnector: 06564</p> <b>5.0V Supply</b> 0805 (2012 Metric) >NAME >VALUE 1206 (3216 Metric) >NAME >VALUE 0603 (1608 Metric) >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE 0603-Mini <p>Mini footprint for dense boards</p> >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE <p><b>Resistors</b></p> <b>0402</b> - 0402 Surface Mount Package <ul> <li>22 Ohm 1% 1/16W [Digikey: 311-22.0LRTR-ND]</li> <li>33 Ohm 5% 1/16W</li> <li>1.0K 5% 1/16W</li> <li>1.5K 5% 1/16W</li> <li>2.0K 1% 1/16W</li> <li>10.0K 1% 1/16W [Digikey: 311-10.0KLRTR-ND]</li> <li>10.0K 5% 1/16W [Digikey: RMCF0402JT10K0TR-ND]</li> <li>12.1K 1% 1/16W [Digikey: 311-22.0LRTR-ND]</li> <li>100.0K 5% 1/16W</li> </ul> <b>0603</b> - 0603 Surface Mount Package<br> <ul> <li>0 Ohm 1/10 Watt 1% Resistor</li> <li>15 Ohm 1/10 Watt 1% Resistor</li> <li>33 Ohm 1/10 Watt 1% Resistor</li> <li>49.9 Ohm 1/10 Watt 1% Resistor</li> <li>100 Ohm 1/10 Watt 1% Resistor</li> <li>150 Ohm 1/10 Watt 1% Resistor</li> <li>240 Ohm 1/10 Watt 1% Resistor</li> <li>390 Ohm 1/10 Watt 1% Resistor</li> <li>560 Ohm 1/10 Watt 1% Resistor</li> <li>680 Ohm 1/10 Watt 1% Resistor</li> <li>750 Ohm 1/10 Watt 1% Resistor</li> <li>1.0K Ohm 1/10 Watt 1% Resistor</li> <li>1.5K Ohm 1/10 Watt 1% Resistor</li> <li>2.0K Ohm 1/10 Watt 1% Resistor</li> <li>2.2K Ohm 1/10 Watt 1% Resistor</li> <li>3.3K Ohm 1/10 Watt 1% Resistor</li> <li>4.7K Ohm 1/10 Watt 1% Resistor</li> <li>10.0K Ohm 1/10 Watt 1% Resistor</li> <li>12.0K Ohm 1/10 Watt 1% Resistor</li> <li>12.1K Ohm 1/10 Watt 1% Resistor</li> <li>20.0K Ohm 1/10 Watt 1% Resistor</li> <li>33.0K Ohm 1/10 Watt 1% Resistor</li> <li>100.0K Ohm 1/10 Watt 1% Resistor</li> </ul> <b>0805</b> - 0805 Surface Mount Package <ul> <li>0 Ohm 1/8 Watt 1% Resistor</li> <li>33 Ohm 1/8 Watt 1% Resistor</li> <li>100 Ohm 1/8 Watt 1% Resistor</li> <li>150 Ohm 1/8 Watt 1% Resistor</li> <li>200 Ohm 1/8 Watt 1% Resistor</li> <li>240 Ohm 1/8 Watt 1% Resistor</li> <li>330 Ohm 1/8 Watt 1% Resistor</li> <li>390 Ohm 1/8 Watt 1% Resistor</li> <li>470 Ohm 1/8 Watt 1% Resistor</li> <li>1.0K Ohm 1/8 Watt 1% Resistor</li> <li>1.5K Ohm 1/8 Watt 1% Resistor</li> <li>2.0K Ohm 1/8 Watt 1% Resistor</li> <li>4.7K Ohm 1/8 Watt 1% Resistor</li> <li>5.1K Ohm 1/8 Watt 1% Resistor</li> <li>5.6K Ohm 1/8 Watt 1% Resistor</li> <li>10.0K Ohm 1/8 Watt 1% Resistor</li> <li>22.0K Ohm 1/8 Watt 1% Resistor</li> <li>33.0K Ohm 1/8 Watt 1% Resistor</li> <li>100K Ohm 1/8 Watt 1% Resistor</li> </ul> <b>1206</b> - 1206 Surface Mount Package<br/> <br/> <b>2012</b> - 2010 Surface Mount Package<br/> <ul><li>0.11 Ohm 1/2 Watt 1% Resistor - Digikey: RHM.11UCT-ND</li></ul> <b>GND</b> >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE <b>TSSOP20</b> <p>From http://focus.ti.com/lit/ds/symlink/txb0104.pdf</p> >NAME <= 1.2V - 3.6V 1.65V - 5.5V >NAME >VALUE <b>TXB0108 or TXS0108</b> <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 mm, outline 2.4 x 4.4 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 mm, outline 2.5 x 5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 mm, outline 3 x 5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 mm, outline 4 x 5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 mm, outline 5 x 5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 mm, outline 6 x 5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 mm + 5 mm, outline 2.4 x 7 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 + 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 + 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 + 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 2.5 + 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 5 mm, outline 2.4 x 4.4 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 5 mm, outline 3 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 5 mm, outline 5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> Horizontal, grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 7.5 mm, outline 3.2 x 10.3 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 7.5 mm, outline 4.2 x 10.3 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 7.5 mm, outline 5.2 x 10.6 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 10.2 mm, outline 4.3 x 13.3 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 10.2 mm, outline 5.4 x 13.3 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 10.2 mm, outline 6.4 x 13.3 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 15 mm, outline 5.4 x 18.3 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 15 mm, outline 6.4 x 18.3 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 15 mm, outline 7.2 x 18.3 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 15 mm, outline 8.4 x 18.3 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 15 mm, outline 9.1 x 18.2 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 22.5 mm, outline 6.2 x 26.8 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 22.5 mm, outline 7.4 x 26.8 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 22.5 mm, outline 8.7 x 26.8 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 22.5 mm, outline 10.8 x 26.8 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 22.5 mm, outline 11.3 x 26.8 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 27.5 mm, outline 9.3 x 31.6 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 27.5 mm, outline 11.3 x 31.6 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 27.5 mm, outline 13.4 x 31.6 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 27.5 mm, outline 20.5 x 31.6 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 32.5 mm, outline 13.7 x 37.4 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 32.5 mm, outline 16.2 x 37.4 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 32.5 mm, outline 18.2 x 37.4 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 37.5 mm, outline 19.2 x 41.8 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 37.5 mm, outline 20.3 x 41.8 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 37.5 mm, outline 15.5 x 41.8 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 7.5 mm, outline 6.3 x 10.6 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 27.5 mm, outline 15.4 x 31.6 mm >NAME >VALUE <b>CAPACITOR</b><p> grid 27.5 mm, outline 17.3 x 31.6 mm >NAME >VALUE <b>Ceramic Chip Capacitor KEMET 0204 Reflow solder</b><p> Metric Code Size 1005 >NAME >VALUE <b>Ceramic Chip Capacitor KEMET 0603 Reflow solder</b><p> Metric Code Size 1608 >NAME >VALUE <b>Ceramic Chip Capacitor KEMET 0805 Reflow solder</b><p> Metric Code Size 2012 >NAME >VALUE <b>Ceramic Chip Capacitor KEMET 1206 Reflow solder</b><p> Metric Code Size 3216 >NAME >VALUE <b>Ceramic Chip Capacitor KEMET 1210 Reflow solder</b><p> Metric Code Size 3225 >NAME >VALUE <b>Ceramic Chip Capacitor KEMET 1812 Reflow solder</b><p> Metric Code Size 4532 >NAME >VALUE <b>Ceramic Chip Capacitor KEMET 1825 Reflow solder</b><p> Metric Code Size 4564 >NAME >VALUE <b>Ceramic Chip Capacitor KEMET 2220 Reflow solder</b><p> Metric Code Size 5650 >NAME >VALUE <b>Ceramic Chip Capacitor KEMET 2225 Reflow solder</b><p> Metric Code Size 5664 >NAME >VALUE >NAME >VALUE <B>CAPACITOR</B>, European symbol <b>CHICAGO MINIATURE LAMP, INC.</b><p> 7022X Series SMT LEDs 1206 Package Size >NAME >VALUE <B>LED</B><p> 5 mm, square, Siemens >NAME >VALUE <B>LED</B><p> 2 x 5 mm, rectangle >NAME >VALUE <B>LED</B><p> 3 mm, round >NAME >VALUE <B>LED</B><p> 5 mm, round >NAME >VALUE <B>LED</B><p> 1 mm, round, Siemens >NAME >VALUE <B>LED BLOCK</B><p> 1 LED, Siemens >NAME >VALUE <b>LED HOLDER</b><p> Siemens >NAME >VALUE <b>LED HOLDER</b><p> Siemens >NAME >VALUE <b>LED HOLDER</b><p> Siemens A+ K- >NAME >VALUE <b>LED HOLDER</b><p> Siemens >NAME >VALUE + - <B>IR LED</B><p> infrared emitting diode, Infineon TO-18, lead spacing 2.54 mm, cathode marking<p> Inifineon >NAME >VALUE <B>IR LED</B><p> infrared emitting diode, Infineon TO-18, lead spacing 2.54 mm, cathode marking<p> Inifineon >NAME >VALUE <B>LED</B><p> rectangle, 5.7 x 3.2 mm >NAME >VALUE <B>IR LED</B><p> IR transmitter Siemens >NAME >VALUE <b>TOPLED® High-optical Power LED (HOP)</b><p> Source: http://www.osram.convergy.de/ ... ls_t675.pdf >NAME >VALUE A C <b>BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED</b><p> Source: http://www.osram.convergy.de/ ... LB M676.pdf A C >NAME >VALUE <b>Super SIDELED® High-Current LED</b><p> LG A672, LP A672 <br> Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13) C A >NAME >VALUE <b>SmartLEDTM Hyper-Bright LED</b><p> Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf >NAME >VALUE <b>Hyper TOPLED® RG Hyper-Bright LED</b><p> Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf >NAME >VALUE A C <b>Hyper Micro SIDELED®</b><p> Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf >NAME >VALUE <b>Power TOPLED®</b><p> Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf >NAME >VALUE C A C C <b>Hyper CHIPLED Hyper-Bright LED</b><p> LB Q993<br> Source: http://www.osram.convergy.de/ ... Lb_q993.pdf >NAME >VALUE <b>Hyper CHIPLED Hyper-Bright LED</b><p> LB R99A<br> Source: http://www.osram.convergy.de/ ... lb_r99a.pdf >NAME >VALUE <b>Mini TOPLED Santana®</b><p> Source: http://www.osram.convergy.de/ ... LG M470.pdf >NAME >VALUE <b>CHIPLED</b><p> Source: http://www.osram.convergy.de/ ... LG_R971.pdf >NAME >VALUE <b>CHIPLED</b><p> Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf >NAME >VALUE <b>CHIPLED</b><p> Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf >NAME >VALUE <b>CHIPLED-0603</b><p> Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br> Package able to withstand TTW-soldering heat<br> Package suitable for TTW-soldering<br> Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf >NAME >VALUE <b>SmartLED TTW</b><p> Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br> Package able to withstand TTW-soldering heat<br> Package suitable for TTW-soldering<br> Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf >NAME >VALUE <b>Lumileds Lighting. LUXEON®</b> with cool pad<p> Source: K2.pdf >NAME >VALUE <b>Lumileds Lighting. LUXEON®</b> without cool pad<p> Source: K2.pdf >NAME >VALUE <B>LED</B><p> 10 mm, round >NAME >VALUE <b>SURFACE MOUNT LED LAMP</b> 3.5x2.8mm<p> Source: http://www.kingbright.com/manager/upload/pdf/KA-3528ASYC(Ver1189474662.1) >NAME >VALUE >NAME >VALUE <b>LED</b><p> <u>OSRAM</u>:<br> - <u>CHIPLED</u><br> LG R971, LG N971, LY N971, LG Q971, LY Q971, LO R971, LY R971 LH N974, LH R974<br> LS Q976, LO Q976, LY Q976<br> LO Q996<br> - <u>Hyper CHIPLED</u><br> LW Q18S<br> LB Q993, LB Q99A, LB R99A<br> - <u>SideLED</u><br> LS A670, LO A670, LY A670, LG A670, LP A670<br> LB A673, LV A673, LT A673, LW A673<br> LH A674<br> LY A675<br> LS A676, LA A676, LO A676, LY A676, LW A676<br> LS A679, LY A679, LG A679<br> - <u>Hyper Micro SIDELED®</u><br> LS Y876, LA Y876, LO Y876, LY Y876<br> LT Y87S<br> - <u>SmartLED</u><br> LW L88C, LW L88S<br> LB L89C, LB L89S, LG L890<br> LS L89K, LO L89K, LY L89K<br> LS L896, LA L896, LO L896, LY L896<br> - <u>TOPLED</u><br> LS T670, LO T670, LY T670, LG T670, LP T670<br> LSG T670, LSP T670, LSY T670, LOP T670, LYG T670<br> LG T671, LOG T671, LSG T671<br> LB T673, LV T673, LT T673, LW T673<br> LH T674<br> LS T676, LA T676, LO T676, LY T676, LB T676, LH T676, LSB T676, LW T676<br> LB T67C, LV T67C, LT T67C, LS T67K, LO T67K, LY T67K, LW E67C<br> LS E67B, LA E67B, LO E67B, LY E67B, LB E67C, LV E67C, LT E67C<br> LW T67C<br> LS T679, LY T679, LG T679<br> LS T770, LO T770, LY T770, LG T770, LP T770<br> LB T773, LV T773, LT T773, LW T773<br> LH T774<br> LS E675, LA E675, LY E675, LS T675<br> LS T776, LA T776, LO T776, LY T776, LB T776<br> LHGB T686<br> LT T68C, LB T68C<br> - <u>Hyper Mini TOPLED®</u><br> LB M676<br> - <u>Mini TOPLED Santana®</u><br> LG M470<br> LS M47K, LO M47K, LY M47K <p> Source: http://www.osram.convergy.de<p> <u>LUXEON:</u><br> - <u>LUMILED®</u><br> LXK2-PW12-R00, LXK2-PW12-S00, LXK2-PW14-U00, LXK2-PW14-V00<br> LXK2-PM12-R00, LXK2-PM12-S00, LXK2-PM14-U00<br> LXK2-PE12-Q00, LXK2-PE12-R00, LXK2-PE12-S00, LXK2-PE14-T00, LXK2-PE14-U00<br> LXK2-PB12-K00, LXK2-PB12-L00, LXK2-PB12-M00, LXK2-PB14-N00, LXK2-PB14-P00, LXK2-PB14-Q00<br> LXK2-PR12-L00, LXK2-PR12-M00, LXK2-PR14-Q00, LXK2-PR14-R00<br> LXK2-PD12-Q00, LXK2-PD12-R00, LXK2-PD12-S00<br> LXK2-PH12-R00, LXK2-PH12-S00<br> LXK2-PL12-P00, LXK2-PL12-Q00, LXK2-PL12-R00 <p> Source: www.luxeon.com<p> <u>KINGBRIGHT:</U><p> KA-3528ASYC<br> Source: www.kingbright.com <b>Small Outline Transistor</b><p> package type OT >NAME >VALUE <b>SC-70 Package</b> >NAME >VALUE STM32F103CB HW v1 TLV70033